Soil Testing Equipment

Our Complete range of products are Soil Permeability Apparatus, Lateral Pressure Assembly, Universal or Combination Permeameter, Split Spoon Sampler and Split Spoon Sampler with Liner.

Soil Permeability Apparatus

range 0-10-3 to 10-7 cm/sec.
size 10mm.

The apparatus is used for the laboratory determination of permeability of soils using a constant or a variable head. This test is recommended for soils with co-efficient of permeability in the range of 10 x -3 to 10 x -7cm/sec. The maximum particle size of the soil which can be tested in the mould is 10 mm.

Salient Features

Specifications : The equipment comprises one each: Gun metal mould, 100mm I.D. x 127 mm high x 1000 ml volume. Gun metal mould extension collar, 100 mm dia x 60 mm high for the above mould. Gun metal Drainage base plate with a recess for a porous stone and with an outlet valve.Metallic clamping ring.Gun metal drainage cap (top plate with a recess for a porous stone and fitted with an inlet valve and an air release valve.) Gun metal dummy plate to serve as a false bottom during compaction. Porous stone for drainage cap. Porous stone for base plate. Set of glass stand pipes approximately 6 mm dia., 10 mm dia and 20 mm dia mounted on a wooden board. Each glass tube is longer than 1 meter and has a serrested end at the bottom. To read water head 2 Nos. meter scales are fixed between the tubes. A length of 3 meter long rubber tubing with pinch cock is also supplied.

View Complete Details

Ask Latest Price & Details

Lateral Pressure Assembly

It is designed for application of cell pressures up to 10 kg/cm2 on a triaxial specimen in the triaxial cell. This unit is mostly used in routine which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated.

Salient Features

Specifications : The apparatus consists of a pressure chamber which has a flanged top cap fitted with a 10 Kg/cm. Pressure gauge and a schrader valve for pumping in air. Water inlet and drain cock are fitted to the chamber. The foot pump supplied easily develops a pressure of 10 Kg/cm. Complete with connecting pressure hose.

View Complete Details

Ask Latest Price & Details

Universal Or Combination Permeameter

Specifications : Same as above but instead of a set of three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm bore. 75mm bore tube is provided with overflow arrangement for constant head tests. The remaining tubes are used for falling head test.

Salient Features

Optional : Overhead tank made of steel, approximately 37.5cm dia x 1mtr. high. it is provided with an inlet port at the top and size outlet at bottom with cocks and air inlet and water filling tube on top. An arrangement is provided to indicate the water level. An extra meralic tube having approximately 5mm /6mm I.D. and 1 mtr. long is also supplied 2.6 kg x 310 mm controlled fall and Rammer 4.89 kg x 450 mm controlled fall.
Spares : Pair of top and bottom Porous stones for permeameter mould.

View Complete Details

Ask Latest Price & Details

Split Spoon Sampler

This is used for Standard Penetration Test. For determining penetration resistance (N Value) of soil which can be related to unconfined Compressive strength, Penetration resistance (N Value) of soil is determined by giving a number of blows with a 65 kg. weight falling through a given distance of 75 cm required to penetrate the assembly to a depth of 30 cm, when properly seated on the ground.

Salient Features

Specifications : The sampler is made from a steel tube split lengthwise and held together by a head fitted with a ball check valve and a hardened steel shoe of inside cutting edge of 35 mm dia. The sampler is 35 mm I.D. and 50.8 mm in outer diameter and 508 mm long. One adaptor to connect 'A' type drill rods is also supplied.

Spares : Body of split spoon sampler, shoe of split spoon sampler, head of split spoon sampler.

View Complete Details

Ask Latest Price & Details

Split Spoon Sampler With Liner

Same as above but the diameter is increased to accommodate a brass liner. Complete with brass liner. Spares: Body, shoe & Head of split spoon sampler. And Brass liner. Note: The above outfits can also be supplied in FPS Units in conformity with ASTM D 1586-64T (Penetration test and split barrel sampling of soils).

Salient Features

Accessories : Drive weight 65 kg. with chain. IS: 2131-1963. Drive pipe assembly with two end caps of mild steel to give a fall of 75 cms for drive weight.

View Complete Details

Ask Latest Price & Details

Universal Automatic Compactor

Our company offers Universal Automatic Compactor, which are motor driven mechanical compactor useful for soil compaction for 100 & 150 mm moulds. This equipment is suitable for operation on 230 volts, 50 cycles, single phase and A.C. supply.

Specifications :
ENTEK-026

Universal Automatic Compactor, IS : 2720 (P-vii & viii), IS : 10074-82
Motorized for 100 & 150 mm moulds.
Two sets of rammer 2.6 kg x 310 mm drop & 4.89 kg x 450 mm drop as per ISS/ BSS. with one CBR Mould with collar & perforated base plate. l/5th revolution per stroke of rotating base plate with Automatic blow counter.
230V, 1 Phase, 50 cycles, A.C. supply.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Rajeev Ranjan (Entek Instruments India Pvt. Ltd.)
Plot No. 50, Upper Ground Floor, Near Saket Metro Station, Behind Bawa Timber, Saidulajab Extension, Mb Road, Saket, New Delhi - 110030
Share us via
Found Something Wrong with this Listing? Report Here.