Our Products
Now supported by the Crowcon C-Test which provides bump testing, event management and calibration from a simple to use wall mount station and gives fleet or safety managers the ability to update configurations on large fleets. It also maintains the all important event logs that demonstrate users are working within the company requirements.See datasheet for more info.
Easy to maintainThe Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments.
Featuring simple single button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.
Gases include the most common four (carbon monoxide, methane, oxygen and hydrogen sulphide), but also an expanded range: ammonia, ozone, sulphur dioxide, H2filtered CO (for steel plants) and IR carbon dioxide (for safe area use only).
RobustSize | 114 x 71 x 48mm (tapers to 20mm) (4.5 x 2.8 x 1.9ins) |
Weight | 295g (10.4oz) |
Alarms | 95dB multiple alarm sounds allow selection of distinctive tones fordifferent alarm levelsInternal vibrating alarm |
Display | Graphic LCD with backlight, giving simultaneous display for all gaschannels. Graphic symbols for battery (with proportional indicationof remaining operation time), healthy operation or fault warning.Start up indication when calibration is due, overdue, or servicerequired.Normal display: Real time gas concentration levelsDisplay recall: Peak readings and TWA |
Data logging | Timed: 50 hours at 1-minute data rate (>12, 000 data logs of 4 channels)Threshold: Starts after adjustable pre-set levelEvent: >5, 000 events |
Event logging | Alarm, over range, calibration, bump, on/off, TWA, 1000 events |
Battery | Rechargeable Li-ion battery |
Operating time | Based on four-gas instrument fitted with flammable sensor: A 5-hour charge from flat provides at least 12 hours of continuous use.A 12-hour charge provides at least 14 hours of continuous use |
Sampling | Diffusion or hand aspirator |
Operating temperature | -20C to +55C (-4F to +131F) |
Storage | -25C to +65C (-13F to +149F) |
Humidity | 20 to 90% RH@ 40C non-condensing |
Ingress protection | IP65 and IP67 |
Approvals | ATEX II 2 G Ex ia d IIC T4 Gb (-20C Ta +55C)BASEEFA05ATEX0187IECEx Ex ia d IIC T4 Gb (-20C Ta +55C) BAS05.0059CSA Class I Division 1 Groups A, B, C and D |
Safety standards | EN60079-0, EN60079-11, EN60079-1CSA22.2, 152EN50270, EN50271, EN50104, EN45544, EN60079, IEC61508 |
PC Interface | RS232 connection from interface module in chargerRS232/USB converter available |
Calibration | Can be routinely calibrated using Portables PC software or CrowconCheckbox IMH |
Charging | Single way drop-in charger with UK, EU or US plug or in-line110V/220V supplySingle way drop-in charger with options as above includingPC interface5 way multi-charger with universal power supplyVehicle adapter for in-vehicle chargingUniversal charger for vehicle, wall and desk mounting with amulti-region plug (supplied with EU/UK/US/Australian inserts) andstatus indication |
Gas-Pro PID utilises the Photo Ionization Detection technology to allow you to detect hundreds of Volatile Organic Compounds (VOCs). If you are working in an environment that is high in levels of solvents, glues, paints and general VOCs, the Gas-Pro PID will monitor your safety. With its dual-coloured display, the monitor will alert the user with its 95db audible alarm and its dual-coloured visual alarm bars.
User friendly:Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of useand user focused features.
An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes
User FriendlySize | 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins) |
Weight | 309g 4 gas (10.8oz)/ 340g pumped (11.9oz)333g 5 gas (11.7oz)/ 362g pumped (12.7oz) |
Alarms | Audible >95dB @ 30cm (98dB @30cm in loud mode)Visual - all angle dual red/blue LEDsVibrating alert |
Display | Top mount for ease of view with dual colour backlight (green/red) |
Data logging | 125hr at 10-second intervals (45, 000 logs) |
Event logging | Alarm, over range, calibration, bump, on/off, TWA, 1000 events |
Battery | Rechargeable Li-ion, >14hr (13 hours pumped operation) based on CH4, O2, H2S, COTypical charge time 7.5hr |
Sampling | Internal pump as option |
Operating temperature | -20C to +55C (-4F to +131F) |
Storage | -25C to +65C (-13F to +149F) |
Humidity | 10 to 95% RH+ |
Ingress protection | Independently tested to IP65 and IP67 |
Approvals | IECEx: Ex d ia IIC T4 Gb Tamb -20C to +55CATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20C to +55CUL: Gas detector use in hazardous locations Class 1, Division 1, Groups A, B, C, and D only as to intrinsic safetyINMETRO |
Compliance | FCC and CE. Complies with EMC Directive 2014/30/EU, EN50270 and ICES-003 |
Interface | Data connection for gas test solutions and direct to PC |
Charging | Direct connection to multi-regional power supplyVehicle charger adaptorDesktop cradleUSB power and communications lead |
Tetra is a flexible multigas monitor for the detection of flammable gases, oxygen and a wide range of toxic gases. Available in rechargeable or disposable battery format and with or without an internal pump, it is used extensively in the utilities, chemicals and hydrocarbon processing markets.
Intrinsically safe, Tetra is one of the only portable gas detectors with embedded software designed to the exacting requirements of IEC 61508-3, guaranteeing reliable and dependable operation.
Features include :
LaserMethane mini (LMm) is a compact handheld detector for the detection of methane gas at a safe distance (0-100m). Utilising laser technology, methane leaks are located by pointing the laser beam towards the suspected leak, or along the survey line. This revolutionary technology removes the need to access elevated places, reducing cost and improving the speed of leak detection activities. LMm is ideal for use in industrial, commercial and research environments, anywhere that methane could be present and in need of locating or monitoring.
LMm is easy to operate and requires no maintenance. An automatic self check during start-up ensures consistent performance and reliability every time units are turned on. The green laser guide light is highly visible even under strong sunlight simplifying the task of locating leaks. The Bluetooth option combines the benefit of LMm with additional data storage functions, allowing connection to an Android device using the GasViewer app. Important data including gas level, time, date and location are combined and can then be saved or emailed to a central point.
Remote detectionRugged and robust, Detective+ features either fixed or folding legs and a protective frame that allows stacking for easier storage.
New! Detective+ is now wireless.Detective Wirelessis a wireless module that gives you up to 100 meters range excluding the use of cables.
TheDetective Wirelessmodules can also be used as a repeater giving you a stronger signal in those areas that are built up and that have issues with signal strength.
Detective Wirelessis backwards compatible enabling use with all version of Detective and Detective+, so it can be used on your existing fleet.Find out more.
Available with an optional internal pump for sampling versatility, alarms are announced with an extremely loud sounder, while multiple beacons ensure 360 degree visibility.
Detective+ may now also be equipped with infra-red (IR) sensors, providing either CO2detection, or allowing higher levels of flammable gas monitoring. IR sensors also provide immunity to the poisoning effects which standard flammable gas sensors can suffer from. This extends sensor life and further increases measurement confidence in tough applications such as water treatment plants and certain chemical or hydrocarbon processing facilities.
Versatile and user friendlySize | 640 x 455 x 455mm (25.2 x 17.9 x 17.9ins) |
Weight | 7.5kg (19lbs) |
Alarms | Three large, top mounted red LED clusters and a single red LED on control panel.Alarm mode: LED clusters flash in quick succession. LED clusters of linked Detectives repeating the alarm, flashslower than LED lights on those Detectives sensing the hazardNormal working: Slow flashing green LEDBattery low: Rapid flashing green LEDWailing alarm, omni-direction siren, 104 dBA at 1m |
Display | High contrast LCD with back light. Values and units for up to 4 gases displayed simultaneously at current, TWA orpeak levels, low battery, real time and elapsed time calibration and configuration data also displayed. |
Battery | 125hrs at 10-second intervals (45, 000 logs) |
Event logging | Alarm, over range, calibration, bump, on/off, TWA, 1000 events |
Battery | Standard 6V, 7.2Ah, sealed lead acid battery packOptional 6V, 12Ah high capacity packUp to 36 hours with flammable/ CO2 sensor fitted with 7.2Ah batteryUp to 60 hours with optional 12Ah battery pack |
Typical response times | Methane 20s, oxygen 10s, typical toxic gas 20s, IR 20s |
Operating temperature | -20Cto +50C(-4Fto 122F) |
Expected sensor life | Flammable 5 years, toxic 3 years, oxygen 2 years minimum, IR>5 years |
Humidity | 0-95% RH non-condensing |
EMC | EN 50270, FCC CFR47 Part 15 |
Ingress protection | IP65 |
Approvals | Europe: ATEX II 2G EEx ib d IIC T4International: IECEx EEx ib d IIC T4 |
Standards | EN50014, EN50018, EN50020, EN50104, EN45544, IEC60079-0/-1 IEC60079-11 |
PC Interface | Via RS232 lead. Portables PC software can be used to set alarms, clock, datalogging interval and password, manages datalogging giving graphical display of instrument log file and allows to export to spreadsheet. |
Calibration | Quick calibration using internal menu command, Portables PC or the Crowcon CheckBox IMH management system |
Accessories | Baffle plate, interconnecting leads, RS232 communications lead |
Sampling | Internal electric sampling pump option, manual aspiration |
Linked Detectives | Up to 12 units can be linked to provide perimeter or area monitoring |