The two components, resin and hardener are mixed thoroughly in specified ratio with a screw driver, knife or rod until the mixture is uniform and free of lumps. Thorough mixing is necessary to ensure the properties of finished material. When due to long storage the liquid resin comes to surface and the filler settles down, the resin component should be thoroughly mixed to get even consistency and only after that it should be mixed with the hardener. The surface should be dried and made free from oil, rust, grease and paint. For improving adhesion, roughen the surface with an emery paper and degrease with a solvent
Write a Review
EPOXY ENGINEERS (EPOXY ENGINEERS)
23, INDRA MARKET, OLD SUBZI MANDI, DELHI-110007
Share us via
