Jodhpur, Rajasthan, India
GST : 08AABFE6551F1ZL
Verified
Add Review
Our Products
| Up to 6 mRung Spacing 300 mmFibre Glass Box or Channel Section RailsFibre glass or Aluminum RungsSwivel Shoes with Rubber PadsAnti Skid V-Rung (Optional)Aluminum Rungs (Optional) | |
| HEAVY DUTY EXTENSION LADDERS | |
|
| FIBREGLASS OPERATING AND DISCHARGE RODS AND HOTLINE STICKS | ||||||||||||||||
|
The best thing about our FRP Lighting Poles is that they can withstand adverse weather conditions. We are counted among the top Manufacturers, Exporters and Suppliers of FRP Lighting Poles. The manufacturing and testing of our FRP Lighting Poles are done using the latest techniques under the keen observation of experts. One can place retail as well as bulk orders for the poles with us.
|
| ADVANTAGE OF ERCON COMPOSITE POLE | |
| Aesthetically Beautiful | |
| Contemporary design available in fabulous architectural colors. Extra protective surface gives lasting good looks. | |
| Circular & Square Poles | |
| Elegant & economical designs. Square poles of smaller cross sections also can withstand higher wind loads. | |
| Extension Arm | |
| Multiple arm options available such as single/double/multiple in straight & J-shape. | |
| Tiltable Pole | |
| ERCONs lightweight FRP poles come with an option that enables the pole to be tilted for easy maintenance of light bulb and fixtures. This lowers cost of maintenance by saving labour & time. | |
| Corrosion Resistant | |
| Excellent resistance to salty moist winds, CO2 & most chemicals, making them durable & economical in long term. | |
| Easy Repair | |
| If FRP pole gets damaged it can be easily repaired at the site by hand layup. | |
| Resistant to microorganisms of ground | |
| Composite poles are termite & germ proof. | |
| Telescopic Design | |
| Multiple piece telescopic design makes ERCON Composite Poles, of sizes greater than 6m also, to be transported in 20 ft. truck with easy assembly at site. This makes them the most cost-effective transportable poles in the market. | |
| Great Dynamic and Long Fatigue Life | |
| ERCON Poles have higher glass content (65-70%) as compared to any other FRP poles. Special resins give high axial strength and glass fabric provides cross layer reinforcement for excellent strength against vibrations. | |
| High Wind Load Resistance | |
| Composite poles from ERCON can take upto 170 Kmph wind loads & can be designed for even higher wind loads. | |
| Environment Friendly | |
| ERCON poles use low energy in manufacturing as well as transportation. No repeated painting & no replacement required unlike metal poles, thus making these poles environment friendly throughout their lifetime. | |
| CONVENTIONAL POLE VS ERCON COMPOSITE POLE | |||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
| TECHNICAL SPECIFICATIONS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Ercon FRP Hand Rails are designed for quick and easy assembly. The system can be prefabricated in large sections and shipped to the site or fabricated and installed on site with simple hand tools. All connections are very easy to make. Special adjustable angle connectors in GRP are available for installation on circular tanks. Complete accessories are available for installation and making joints at turns. Assembly details are shown below |
|
We have established ourselves as one of the prominent Manufacturers, Suppliers, and Exporters of GRP Cable Trays. These GRP Cable Trays are made of corrosion resistant and high strength metals. Our GRP Cable Trays have smooth finish and accurate dimensions. Keeping in mind diverse demands of the clients, we have made GRP Cable Trays available in different specifications.
Provided Accessories :
Specifications
| Parameters | Standard Product | Alternative Product |
|---|---|---|
| Material | Polyester Resin | Vinylester Resin, Low Smoke Acrylate(Equiv. MODAR)(Optional) |
| Length | 3 Meters | 2-6 Meters |
| Construction | Perforated Type | Solid Base |
| Width | 50-600 mm-Pultruded | As required(Moulded) |
| Angle of Bends | 90°,45° | As required |
| Colour | Grey | As Desired |
| Fire Retardancy | UL94V1,BS476 PART 7&6 CLASS-II,IS-6746,ASTM-D635,ASTM E-84 | ULV94V0,Class-I |
| Electrostatic | Static | Antistatic |
Support Structure
| Advanteges | Applications |
|---|---|
| Corrosion Resistant | Off shore oil platforms |
| Fire Retardant | Chemical Plants, Refineries |
| High Strength | Effluent Treatment Plants |
| Easy to Install | Marine Industry |
| Light Weight | Metallurgical Plants |
| U. V. Resistant | Fertilizer plants |
| Antistatic | Power Plants, Nuclear Power Plants |
| Non-Toxic | Paper Industry |
| Long Life | Food & Drug Industry Etc. |
Frangible Distance To Go Marker that we offer can withstand jet blasts. It is specially designed for airports, illuminative or reflective runways etc. The best thing about our Frangible Distance To Go Marker is that it is FAA compliant. It is easy to install and maintain. It is manufactured and tested under the guidance of experts with the objective of eliminating each and every possibility of defect.
| |||||||
| ERCON CFRP Laminates | ||||
| TEST DATA Composition | Sizes available | 100 x 1.4 | 50 x 1.4 | 100 x 2.4 |
| ERCON Pultruded Reinforced Polymer (FRP) Plates composed of a dense network of high strength Carbon Fibres Bound in Epoxy Resin | Property | |||
| Fibre Type | Carbon | Carbon | Carbon | |
| Matrix Resin Type | Epoxy | Epoxy | Epoxy | |
| Fibre Volume Fraction | 70% | 70% | 70% | |
| Nominal Width (in mm) | 100 | 50 | 100 | |
| Nominal Thickness | 1.4 | 1.4 | 2.4 | |
| Design Area (Sq. mm) | 140 | 70 | 240 | |
| Modules of Elasticity (GPa) | 152 GPa | 152 GPa | 152 GPa | |
| Tensile Strength @ Ultimate (MPa) | 2120 MPa | 2120 MPa | 2120 MPa | |
| Epoxy Adhesive usage kg/m | 0.8 kg/m | 0.35 kg/m | 0.8 kg/m | |
| ||||||||||||||||||||||
| ERCON introduces high strength, Corrosion resistant and Feather-light GRP trench covers as a value replacement for RCC, Steel or Aluminum trench covers. Ideal for covering both Indoor as well as Outdoor Cable Trenches. |
Specifications
| Ercons Advantages | Problems with conventional covers |
|---|---|
| Light Weight | RCC covers are too heavy to open for maintenance |
| No Risk of Cable Damage | RCC covers if break, damages the cables. GRP being light weight no such risk |
| Corrosion Resistant to water and chemicals | Steel and Aluminum covers corrode over time and look bad and become unsafe |
| Maintenance Free | Steel and Aluminum covers require regular maintenance |
| No Pilferage -as no resale value | Steel and Aluminum covers gets stolen frequently |
| Fire Retardant and Self Extinguishing | RCC cracks, Steel and Aluminum de-shapes |
| Heavy Duty - special designs suitable for fork lift movement available | after corrosion steel or aluminum becomes weak and breaks, RCC if not properly made is very weak |
Details
| Dimensions | Widths up to 1 metre x Length 1m or as per requirement |
|---|---|
| Colour | Grey or other on special request |
| UV Resistant | Long Outdoor Life , meets IS 14887 Standard for outdoor UV resistance life |
| Fire Retardant | Self Extinguishing meets ASTM E-84, ASTM D635 and IS 6746 Standards |
| Loading | Light Duty for walkways 300 Kg/sqm and Heavy duty : 5000Kg fork lift load design Extra Heavy Duty designs also available on request |
|
|||||||||||||||||||||||||||||||||||||||||||||
Our company’s name figures in the list of distinguished Manufacturers, Suppliers and Exporters of Ercon Frangible Approach Masts. We manufacture the Frangible Approach Masts and Poles for the Airports as per ICAO Frangibility part 6 design Manual. The entire range of Masts and Poles are full scale tested for frangibility. The Masts and Poles are provided with Tilting arrangement from base or from centre depending upon the height.
Detail : Poles available up to 4m height and approach light Lattice Masts available up to 25m height
We are a quality-oriented Manufacturer, Supplier, and Exporter of Fibreglass Crossarms. Fibreglass Crossarms that we offer are made from high strength pultruded profiles. Fibreglass Crossarms have advantages such as no bird faults & no corrosion, U.V. resistant and light weight, that make them ideal for coastal and hilly locations. We offer Fibreglass Crossarms at economical price.
Cross Arm Specifications
Advantage Over Conventional Cross Arms
| Properties | Steel | Wood | Fibre Glass |
|---|---|---|---|
| Insulation | Good Conductor | Bad Conductor | Insulator |
| Corrosion | High Corrosion | Rots & Deteriorate | Non Corrosive |
| Weight | Heavy | Heavy | Light |
| Installation | Cumbersome | Cumbersome | Easy |
| Bird Fault | Very HIgh | NIL | NIL |
The Frangible Windsock Mast is designed in accordance with the laid international quality norms. We are a well-known Manufacturer, Exporter and Supplier of Frangible Windsock Mast from Rajasthan, India. Each pole of our Windsock Mast has a unique break system that is incorporated within the main Mast. With us, feel free to place even the bulk orders of Frangible Windsock Mast. We assure you to deliver the placed order within a short notice period.
FRP Fencings that we offer are strong, attractive and the safe solution for all your structural needs. These fencings are resistant to chemicals and acids. We are named among the renowned Manufacturers, Exporters and Suppliers of FRP Fencings. The manufacturing of our FRP Fencings is done using the latest techniques under the strict vigilance of experts. These fencings can be obtained from us at the most reasonable prices.
Advantages :
Applications :
| GRP CABLE LADDERS |
| ERCON GRP/FRP Cable Trays and GRP Cable Ladders are manufactured on a fully automatic Pultrusion Plant. The material is covered with a resin rich surface veil providing it maximum Chemical and U.V. resistance. Ercon cable trays meet stringent Fibre Retardancy requirements. |
SPECIFICATIONS:MEETS EIL & NEMA FG1-1993 SPECIFICATIONS
|
|||||||||||||||||||||||||||||||||
FRP Flag Poles that we offer can withstand extreme wind loads, ultraviolet exposure and other adverse weather conditions. We are enlisted among the reputed Manufacturers, Exporters and Suppliers of FRP Flag Poles. Manufactured under the supervision of experts, our FRP Flag Poles are the perfect option on which buyers can easily rely. Tested using the latest techniques, our FRP Flag Poles are free from all kinds of defects.
Industrial Frangible Masts that we offer are perfect for supporting visual and non-visual aids near airport runways. The name of our company surfaces prominently among the trusted Manufacturers, Exporters and Suppliers of Industrial Frangible Masts. Light in weight yet rigid, buying Frangible Masts from us will be the safest option for the buyers. One can obtain Industrial Frangible Masts from us in small as well as bulk quantities and at competitive prices.
| ||||||||||||||||||||||||||
| ERCON COMPOSITES | |
| . ERCON FRANGILBLE TAXI WAY SIGN BOARD . DISTANCE TO GO MARKER-DTGM-AIRPORT FENCING .AIRPORT FENCINGERCON Frangible Poles and Masts meet ISO9001:2000 Certification and ANNEX 14 & ICAO PART 6 Frangibility Criteria. | |
ERCON FRANGIBLE TAXI WAY SIGN BOARDS
|
| ERCON FRANGIBLE DISTANCE TO GO MARKER- DTGM | |
|
| AIRPORT FENCING |
| Airport Fencing is provided to prevent unauthorized persons entrance to non - public areas of airport. | |
| Meets ANNEX 14 & ICAO PART 6 Frangibility Criteria. | |
| UV Resistant and Non Corrodible | |
| Insulating |
| PARTICULARS | CONVENTIONAL TAXI WAY MAKER | ERCON TAXI WAY MARKERS |
| Base Structure | 2’ PVC Round Pipe/Ms Angle | Non Metallic High Strength Structure |
| U V Protected Front Facia | Not Available | Both Side UV Protected |
| Night Visibility | Not Available | Available |
| Weather Ability | Poor | Very Good |
| Temperature Resistant | Low | 40° C To + 80°C |
| Fire Retardant | No | Yes |
| Maintenance | Required Regularly | Not Required |
| Deformation | Deform under sun and in high wind pressure | No Effect |
| Life | Very Short | Long |
| Front Facia For DTGM | 2’ Round PVC Pipes | Single Perforated Smooth Finish Non Metallic Sheet |
Ercon FRP Handrails are designed for quick and easy assembly. FRP Handrails can be prefabricated in large sections and shipped to the site or fabricated and installed on site with simple hand tools. All connections are very easy to make. Special adjustable angle connectors in FRP Handrails are available for installation on circular tanks. Complete accessories are available for installation and making joints at turns.
FRP GRP Pultruded Fiberglass Operating rod and FRP GRP Pultruded Fiberglass Discharge Rods.High Insulation- Tested as per IS2071(part 1) 1993 RA 1999 for power frequency and Lighting Impulse voltage under dry and wet conditions, Infinite height adjustment between minimum and maximum length
ERCON ROOF TOP
Fiber Glass Module Support• 1Kw: Layout 1x 4 – 250W Panels• 6kW: Layout 2 x 12 – 250W PanelsCustom sizes are also available.
ADVANTAGES• Light Weight - hence reduces weight on roof.• Easy to install on factory sheds, inclined roofs, RCC roofs etc.• Ideally suited for hilly Regions, Deserts and Coastal areas.• Suitable to withstand strong winds & are U.V. resistant.
ERCON FLOOR MOUNTED PV Module Support• Portrait Layout: 8 x 3• Landscape Layout: 4 x 12Custom sizes are also available.
ERCON FRP/ GRP SOLAR LIGHTING POLES
ADVANTAGES • Suitable for installing Solar Modules & LED lights• M.S. powder coated adjustable brackets for Solar Module• M.S. powder coated Tilt-able base plate (optional)• Easy & Fat installation• Light weight• Corrosion resistant• Fire retardant• Aesthetic in looks• Available in many colours
FALSE FLOORING & CABLE TRENCH COVERS• Light weight• Heavy duty• Fast & easy to install• Easy to handle, post installation• Neat, Clean & Elegant in looks• Inter-locking• Even floor beams are FRP suitable for trolleys & light vehicle movements
GLIDE PATH MAST DESIGN CRITERIAERCON Glide Path Masts have been developed to comply with the ICAO annex 14 Volume-I, for safe and precise aircraft landing and the most recent Frangibility stipulations Detailed in ICAO Aerodrome Design Manual Part6.All ERCON Glide Path Masts are manufactured from glass fiber & special Polymeric Resin, Coated with a UV resistance PU coat that can be colored to any aviation specification. Each pole has a unique Frangibility by design and material construction system incorporated within the main mast which will break under the impact of an aircraft.The Glide Path Antenna is attached to the mast by mean of a light weight mounting frame and can move in horizontal and vertical direction within standard range for antenna adjustment.
ADVANTAGES OF ERCON GLASSFIBER MAST
GLIDE PATH MAST DETAILAll Glide Path Mast are manufactured to meet ICAO requirement for size, material and color. Client Specific colors can be provided and all colors used are designed to give maximum contrast with their background.
RECOMMENDED GLIDE PATH MAST SIZEStandard Mast Height is 15 to18 meters available 16.5 to 18 meters is also available.COLOR (Standards) Red & White (other color as per requirement can be supplied)
TECHNICAL Detail:
