ATTSU Termica S. L.

GIRONA, Spain

We are offering steam boiler . The rl boiler is a steam boiler that is horizontal, fire-tube with three passes and smoke chamber. The chamber is completely cooled by boiler water. With steam production from 50 to 5.000 kgh. And thermal power from 38 kw to 3.793 kw. It's main summed up characteristics are: low heat loss from radiation thanks to the insulation of great thickness and high density as well as the front and back door insulation. good accessibility for maintenance and checks due to the front door with access to the entire furnace and the front tubular plate. Furthermore, there is total access to the rear tubular plate and smoke box via the rear door. the furnace design and tubular distribution make the rl a boiler with a low thermal load (less than 1.30 mwm3). Thanks to the flame inversion and section retainers with a spiral effect, combustion gives off very little pollution. internal recirculation of water and low resistance to the passage of smoke is guaranteed thanks to the design, smoke tube section and the separation between them. high amount of steam achieved thanks to the steam chamber's considerable volume and height, together with the addition of the interior drip trap. the rl boiler, according to the pressure and fuel can reach a performance of 91%. energy savings can reach up to 6% by installing an attsu economizer for heating feed water. the rl boiler is certified in accordance with european directive 9723ce. the rl boiler may be supplied (upon request) with the attsutrol electric control cabinet with built in automation. Twenty-four or seventy-two hour surveillance may be achieved. the plastic protector coating the external insulation (reflective polished stainless steel) preserves it during the installation process and the platform (optional) in the upper boiler (only from model rl-2500 on) protects it from possible damage.

We are offering steam boiler . The ge is an electric steam generator conceived for small consumption, installation in clean environments or supplying high purity steam. With steam production from 20 kgh (15 kw) to 4.500 kgh (3.000 kw). It's main summed up characteristics are: thanks to the experience accumulated over more than 60 years as well as ongoing research, the ge boiler, as a consequence of its insulation of great thickness and high density has very little loss from radiation. good accessibility for maintenance and checks due to the removable inspection box and removable panels. high amount of steam thanks to the steam chamber's considerable volume and height, together with the addition of the interior drip trap. low charge ohmic resistance made of stainless steel, encapsulated and plated, completely submerged make the ge a steam generator with unsurpassable heat transfer. power scaling from 1 to 4 stages makes ge a steam generator that is flexible and modulating in supplying steam. the ge boiler is certified according to european directive 9723ce. upon request, the ge boiler may be supplied with an attsutrol electric control cabinet with built in automation. Twenty-four or seventy-two hour surveillance may be achieved (pending approval by spanish regulations). the ge boiler, thanks to the single startup control, incidence indicators automatic blocking against erroneous maneuvers and a panel with summarized maintenance instructions makes it very reliable and comprehensible to the boiler operator.

We offer the ft boiler is a thermal fluid generator, with vertical execution with three passes and high thermal efficiency. With power from 117 kw to 5, 814 kw. It's main summed up characteristics are: the compact design with high gas and fluid speeds achieve high thermal performance and low film temperatures. the ft boiler has three smoke passes in double helicoidal concentric coils joined by a collector. with over 50 years of experience and ongoing research, we have developed an ft boiler with a uniform and stable film temperature. This translates into an important long-term heating fluid lifespan. due to the very thick, high density insulator, the ft boiler is one of the boilers with the least heat lost from radiation. its easily opened covers, make the ft boiler easy to maintain. standard heat differential of 20 c. For other differential temperatures, please contact us. special models for very high temperatures (400 c or thermal fluid in vapor phase). the ft boiler is certified in accordance with european directive 9723ce, designed in accordance with the trd code and built in accordance with din-4754, une 9300-90, une 9310-92 and trd. the ladder to the upper part in vertical execution is a protective measure for the maintenance staff that is supplied as an option. the ft boiler may be supplied (if ordered) together with the attsutrol electrical cabinet with built in automation for remote control systems. the ft boiler may be supplied (if ordered) with control panel and electric panel with atex. the ft boiler, thanks to the single setup control, incidence indicators, automatic blocking against erroneous maneuvers and a panel with summarized maintenance instructions makes it very reliable and comprehensible to the boiler operator.