GST : 06AACCE5171B1Z4
Write a Review
Our Products
Our offered Product range includes Gas and Flame Detection System, COMBUSTIBLE GAS DETECTOR SGOES, Industrial IR Gas Detector, Open Path Gas Detector and Toxic and Combustible Gas Detector.
Stationary Combustible Gas Detection System has the capacity to monitor potentially hazardous areas in proximity to oil and gas transit stations, gas and oil trunk pipelines, oil and gas storage tank farms, loading racks and similar facilities. SGAES TGM Combustible and Toxic Gas Detection System consists of an UPES Control Unit with possibility of connecting up to 16 detectors to it (SGOES, SSS-903, IPES, TGAES) . The Control Unit communicates to the Gas Detectors via 4-20mA or RS-485. The control unit provides a 4-20 mA signal proportional to the gas detectors measuring range of gas of interest, High and Low Alarm indications and Trouble signals.
If a lower explosive level (LEL) of gas presence (measured as a percent) has reached a preconfigured value, the UPES sounds a warning and sends alert signals to the control room operator. In addition, the system initiates facility level protection programs. These can include activating emergency shutdown systems. The UPES- 50 has an operating voltage of 220 VDC.
Additional Information:
Payment Terms : T/T
Gas detector SGOES has a standard 4-20 mA, HART, RS-485 (Modbus RTU) and relay. The sensor is ideally suited for use in potentially hazardous gas / vapor-containing environments and withstands overload caused by the content of the measured component, more than 100% LEL. The SGOES is insensitive to the presence in the atmosphere of oxygen, nitrogen, carbon dioxide, carbon monoxide, ammonia, hydrogen sulfide. Ideally suitable for use in the oil and gas industry, as well as other areas where it is necessary to monitor the concentration of hydrocarbons. Gas detector SGOES is available in explosion-proof enclosure and certified in accordance with normative documents regulating the use of electrical equipment in hazardous areas IIA subgroup IIB, IIC, temperature classes T1-T4. And also has international approvals for use in hazardous areas and Class 1, Division 1 and 2, Zones 1 and 2. It gives the reading of the gas concentration and displays it on the LCD indicator. Integrated HART-communicator port allows to provide diagnostic and control of specific options and operability of the detector.
Additional Information:
Payment Terms : T/T
IPES IR3s, advanced detection technology ensures rapid flame recognition and alarm signaling. In addition, IPES IR3s selective, multi spectral technology virtually eliminates false alarms. It ignores false triggers from sources such as direct or indirect sunlight, arc welder flash, resistive heaters, fluorescent, halogen, and incandescent light. IPES IR3 sends an alarm only when data from three different IR wavelengths agree that a flame or fire is present in the field of view. Upon confirmation of flame or fire, the IPES IR3 transfers alarm signals to receiving control devices located in control and operations rooms and to fire alarms and burglar/fire alarm systems. While operating, the IPES IR3 transmits detector status information via.
Additional Information:
Payment Terms : T/T
TGAES hydrocarbon gas detector is an open path infrared gas detector that provides continuous monitoring of combustible hydrocarbon gas concentrations in the range of 0 to 1, 5 LEL/m, 0-2, 5 LEL/m, 0-5 LEL/m, over a distance of 5 to 200 meters. Having a response time less that 5 seconds. The TGAES has an explosion proof certified enclosure. TGAES is also certified by international accreditation agencies for SIL-2 rating.
Additional Information:
Payment Terms : T/T
ESP model SSS-903 is a gas detector designed to detect combustible and toxic gases. The SSS-903 detector can operate with the following sensors:
The detector is explosion proof certified, which allows it to be used in the harshest environments. The SSS 903 is certified by international accreditation agencies for SIL-2 rating.
Additional Information:
Payment Terms : T/T
Hemant Agarwal (ESP Safety Pvt. Ltd.)
528-529,Sec-19,Phase-5,Udyog Vihar, Udyog Vihar Phase V, Gurugram, Haryana - 122008, India
Share us via
