Corrosion And Rust Control Products #1758903

CRC Galva Brite Cold Galvanizing Spray forms a protective zinc-aluminium coating on the surfaces. It has corrosion protection properties. This spray is a combination of zinc and aluminium powders, resins and additives. A safety data sheet (MSDS) that is made as per EU directive 93/112 is available for all CRC products. When it comes to delivering spray, we use those shipment modes that enable us to deliver it on time.


Highlights :

• Excellent touch-up for galvanized surfaces
• Provides excellent corrosion and rust resistance to ferrous metals
• The galvanic properties ensure cathodic protection (the coating becomes the anode).
• Unique combination of flexibility and hardness
• Resists rusting, peeling and fading
• Adheres well to metal surfaces
• Combines the galvanized look with the convenience of an aerosol application
• Totally lead and chromate free
• No chlorinated and low-aromatic solvents
• Aerosols use dimethylether (DME) propellant for controlled spray and film properties

Applications :

• Fences and gates Home
• Garden and farm equipment
• Construction equipment
• Structural steel Guard rails
• Welding seams Pipes and fittings
• Coastal and ship borne installations
• Repair of LPG storage tanks

Directions :

• Shake aerosol can very well for at least one minute after agitator ball is free
• Stir or mix bulk product well to obtain a homogeneous dispersion
• Repeat frequently while using. Apply to a clean, degreased, dry surface for best results
• Remove rust and scale with a wire brush
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat
• Additional coats can be applied after 15-20 minutes
• When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes
• If clogging occurs, remove button and clean orifice with fine wire
• Do not use on energized equipment
• Use in well-ventilated area

Specifications :

• Appearance : bright aluminum finish
• Resin type : modified alkyd
• Pigment type : zinc, leafing aluminium
• Specific gravity : 1.06
• Flash point (solvents) aerosol : -4⁰C
• Coverage (30 um, dry) aerosol: approx. 1.6 m2/can (400 ml)
• Drying times to touch : 10-15 min
• Recommended film thickness : 30-40 um
• Thinner / cleaner : white spirit, acetates Dry film properties (35 um on degreased metal)
• Salt spray (ASTM B 117) : 100 h  (35 um film thickness)
• Adhesion on steel (NFT 30038) : 0
• Flexibility (6 mm mandrel, visual) : pass
• Heat resistance (4 h @ 200 °C) : slight
• Yellowing Hardness Persoz (after 72 h) : 80 s

1. GENERAL DESCRIPTION Protective zinc-aluminium coating. A single component, zinc-aluminium coating combining corrosion protection properties with the lustre look of aluminium. Galva Brite is a combination of zinc and aluminium powders, resins and additives, formulated to form a flexible protective film with a bright, glossy appearance. 2. FEATURES Excellent touch-up for galvanised surfaces. Provides excellent corrosion and rust resistance to ferrous metals. The galvanic properties ensure cathodic protection (the coating becomes the anode). Unique combination of flexibility and hardness. Resists rusting, peeling and fading. Adheres well to metal surfaces. Combines the galvanised look with the convenience of an aerosol application. Totally lead and chromate free. No chlorinated and low-aromatic solvents. Aerosols use dimethylether (DME) propellant for controlled spray and film properties. 3. APPLICATIONS Fences and gates Home, garden and farm equipment Construction equipment Structural steel Guard rails Welding seams Pipes and fittings Coastal and shipborne installations Repair of LPG storage tanks 4. DIRECTIONS Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix bulk product well to obtain a homogeneous dispersion. Repeat frequently while using. Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush. Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15-20 minutes. When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with fine wire. Do not use on energised equipment. Use in well ventilated area.

We are offering instant rust remover.

We offer instant rust remover.

We are offering instant rust remover.