Write a Review
Our Products
Our Complete range of products are Commutator Slotting Machine and Servo Controlled Positive Drive Screw Press.
This machine is used for slot cutting of commutator risers. The job is rotated for one turn and the angular position of every copper segment is recorded by means of a laser sensor. Now the job is precisely positioned such that the slotting cutter can cut the first slot in the middle of the segment. After every slot the job is indexed by the precise angular displacement and all slots are cut. Jobs are loaded and unloaded automatically. Average cycle time (floor to floor) for a 23 segment commutator is 16 seconds.
In twin head machines up to 6 slots can be cut in a second.
In a conventional Friction Screw Press, energy is transmitted from the transmission wheels to the flywheel by friction through a leather band. On the return stroke, energy stored in the moving parts is dissipated as heat by applying brake.
In our machines, the two transmission wheels on the conventional Friction Screw Press are dispensed with. The flywheel is driven by an AC servo/ spindle motor through a timer belt/ gear. The motor can be made to run the flywheel at a preset speed very precisely till the dies come very close. The motor is now disabled and the entire energy in the moving masses gets transferred to the job. When the moving die comes to rest, the motor is reversed and the ram returns to its home position very precisely. Since there is no mechanical braking, no energy is wasted during return stroke. The motor brakes on line regeneration principle where the kinetic energy in the moving mass is converted to electrical energy and sent back to the mains. Since the drive motor does not run when the ram is stationary no energy is consumed during idling of press
Mr..P S Nair (Eta Technology Pvt. Ltd.)
13th Cross, Rotary Udyog Road, Peenya - IV Phase, Bengaluru, Karnataka - 560058, +91 80 28361487 / 41171481 / 41171491, Bangalore, India
Share us via
