Evergreen Enterprises Pune, Maharashtra

• MOQ 5 Bag(s)
• TypeAdhesives
• MaterialAdhesive, Tile Adhesive, Water Based Construction
• ApplicationBathrooms, Ceramic, Tiles
• ColorBlack
• Purity90%
• FeatureAntistatic, Heat Resistant, Waterproof
• FormPowder
• Adhesive SideDouble Sided, Single Sided

We are the main supplier of this product. AAC BLOCK ADHESIVE is a factory prepared blend of carefully selected  raw materials, portland cement and graded aggregates and polymers . Designed for use with water to produce high strength  thixotropic mortar , for laying aerated light weight concrete, fly ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of upto 12mm thickness, that meet and exceed the requirements of  National and International Standards . Advantages Long working time No curing required after block work is done Improved adhesion between two blocks Fast & economical  

• MOQ 10 Bag(s)
• TypeReady Mix Plaster
• CertificationISI Certified
• ApplicationConstruction Use
• ColorGrey
• Packaging TypePlastic Bag
• FormPowder
• FeatureLong Shelf Life, Super Smooth Finish
• Brand NameEverplast
• Packaging Size40kg
• ConditionExcellent
• After-Sales Service ProvidedYes

Everplast –  Best is a ready mix cement plaster in pune  with high quality additives which can be used efficiently on  bricks, blocks, and stone walls  as well as on  concrete surfaces. Key benefits: Less rebound reducing wastage Reduces drying shrinkage cracks Eco-friendly: reduces water usage Consistent quality for plaster Better coverage & good bonding Improves labour productivity: reduces labour cost

• MOQ 1 Carton
• Size12x4x2 Inch, 6x5x3 Inch, 9x4x3 Inch
• TypeAac Block
• MaterialCement, Gypsum, Silica Sand
• ApplicationPartiton Walls, Side Walls, Other
• ProcessingMachine
• certifacationCe Certified, Iso Certified
• Brand NameEvergreen Enterprises
• ConditionConsistens
• After-Sales Service ProvidedYES
• Brick Raw MaterialLime, Sand, Cement And Water

We are the main supplier of this product. AAC is produced from the  common materials lime, sand, cement  and  water , and a small amount of  rising agent . After mixing and molding, it is then autoclaved under heat and pressure to create its unique properties. AAC has excellent thermal insulation and acoustic absorption properties. AAC is  fire and pest resistant , and is economically and environmentally superior to the more traditional structural building materials such as  concrete, wood, brick and stone . AAC Bricks Manufacturers & Suppliers in pune AAC Blocks is a unique and excellent type of building material due to its  super heat, fire and sound resistance, AAC blocks are lightweight and offers ultimate workability, flexibility and durability . Its main ingredients include sand, water, quicklime, cement and gypsum. The chemical reaction due to the aluminum paste provides AAC its distinct porous structure, lightness, and insulation properties, completely different compared to other lightweight concrete materials. AAC Bricks Manufacturers & Suppliers in pune

• MOQ 5 Bag(s)
• TypeTile Adhesives
• MaterialPE, PTFE Fabric
• ColorCreamy, Grey
• ApplicationTiles Use
• Width0-10cm
• AdhesivePressure Sensitive
• Adhesive SideDouble Sided, Single Sided
• FeatureHeat Resistant, Waterproof
• Design PrintingOffer Printing
• Brand NameEvergreen Enterprises
• ClassificationGood
• Other NamesTile Morter Adhesive
• Raw MaterialCementitious material

We are the main supplier of this product. Surface Preparation:  All surface must be sound and throughly cleaned before Evergreen Tile Mortar is applied. All traces of greases or oil must be removed with FM DEGREASER. All loose particles of mortar and  points must be removed . Mixing:  Evergreen Tile Mortar should be mixed with water in the ratio of 3:1 (Evergreen Tile Mortar: Water) by volume. Water can be  reduced or increased slightly  to get required consistency. A slow speed drill attached with a suitable mixing paddle is recommended. Hand mixing may be allowed if  drill/paddle is not available . Fixing of Tiles:  Evergreen Tile Mortar should spread on the substrate to a uniform thickness of 4-5mm. Choose work area so that they can be tiled in adhesive. Open wet time is  25 mins. @ 30ºC . Coverage is approx 1m² for 3 to 4 kg. of Evergreen Tile Mortar depending on thickness. Finishing:  Remove excess adhesive with a damp cloth before material has set. Joint grouting may be  commenced 24 hours  after tiles have been laid. Additional Information:  For filling tile joint FAIRFIX TG is used.  

• MOQ 10 Bag(s)
• TypeReady Mix Plaster
• CertificationISI Certified
• ApplicationConstruction Use
• Grade37
• ColorGrey
• Packaging TypePlastic Packet
• FormPowder
• FeatureLong Shelf Life, Super Smooth Finish, Weather Proof
• Brand NameEvergreen Enterprices
• Packaging Size40kg
• ConditionConsistent

Key benefits: Eco-friendly: reduces water usage Consistent quality for plaster Less rebound reducing wastage Better coverage & good bonding Reduces drying shrinkage cracks Improves labor productivity: reduces labor cost It is water resistant with high quality and sustainability. Rendering with Rediplast have lesser chances of developing cracks. Made with graded sand which enhances the durability. WAZIR is a ready mix cement / render with a high quality polymer additives. It can be used on inner and outer walls. It can be used on brick, blocks, stone walls as well as concrete surface.