Continuous Electromagnetic induction capper is mainly applicable of capping operation of non- metal bottleneck such as plastics and glass. Continuous Type Electro Magnetic Induction Capper is suitable especially for those customers who require continuous capping operation with large output. Our Continuous Type Electro Magnetic Induction Capper is highly suitable for capping operation of high threaded cap.

Description:
SPIS-200C Table Top Electromagnetic induction capper is major suitable for capping operation of flat-capped small bottleneck with thread that is made of non-metal materials such as plastic, glass, while it is not suitable for metal & non-threaded bottleneck, or seamful high cap, or bottleneck whose diameter is ranging 20-135. Especially, Continuous Type Electro Magnetic Induction Capper is suitable for the customers who carrying out continuous capping operation for large output and lot.

Manual electromagnetic induction capper is mainly applicable of capping operation of non- metal bottleneck such as plastics and glass. Manual electromagnetic induction capper is suitable especially for those customers who require with small output.

Description:
Spis-100 electromagnetic induction capper is mainly applicable to capping operation of non- metal bottleneck (i. E. Plastics, glass) which features of flat threaded cap, but not applicable to capping operation of metal & non-threaded pressing cap, cap with 20-135diameter and active handle, high cap with over 3 mm spacing between cap surface & bottleneck after screwed in, especially, Manual electromagnetic induction capperis suitable for the customers who Carrying out continuous capping operation for small output.

Technical Specification :

Low Table Top Strapping Machine is suitable for cartons, calcium-plastic cases, books, soft and hard packages as well as all kinds of articles in square, cylinder or annulations. The machine with very low table is suitable for the packages that are very large or heavy.

Application:
The machine with very low table is suitable for the packages that are very large or heavy such as Automobile industries.

SPLS-5045M Manual Type L-sealer machine can convey the products into shrink tunnel for shrink packaging after sealing & cutting. This machine is equipped with shrink tunnel to reach higher working capacity.

Application:

• L-sealer machine is suitable for shrink packing electronic products, hardware, software, foodstuff, printing, pharmacy, floor, ceramics etc in small amount.


• Applied to all kinds of packing materials, such as PVC, POF, PP.

Shri Vinayak Packaging Machine Pvt. Ltd. is designing, manufacturing and marketing the Fully Automatic Strapping Machine (online version), which is a standardized model having power roller table which is beneficial for assorted strapping purposes in the packaging industry. It features rust resistance, and sturdy, rugged design, which enhances the durability of the machinery. The brush guiding mechanism of Online Fully Automatic Strapping Machine is very helpful in strapping the exact position. All its parts and components are avant-garde and easily operational, which means that no regular greasing is required; hence the requirement of maintenance is minimum.

We use best material and alloys to fabricate the machine. Also, latest production technology is used by us which gives marvelous results, owing to its innovativeness and research orientation. Owing to new research technologies, this online version of strapping machine can used in combination with other machinery / equipment; although this stand-alone model is self sufficient enough to deliver desired packaging results.

Salient Features

• Depending on the variety of boxes, the strapping settings can be adjusted.


• Helps in par-excellence and stellar packaging, owing to excellent strapping.


• Its tension can be adjusted as per the requirements.


• Material of construction is aluminum alloy and others.


• Efficient, 24 hrs uninterrupted operation is assured.

The Fully automatic strapping machines provided by us are developed with state-of-the-art innovative designs.These are compact and assembled for lightweight to ensure easy mobility. This machine is fitted with a concise, low maintenance sealer head.

The features of semi-automatic heat sealing strapping machines are:-

• Energy saving mode that activates within 2 min of non-use and allows for instant operation.


• 20 seconds warm up period and quiet intermittent action control


• Excellent quality of timer, solenoid and other electrical components.


• Easier changeover of straps suitable for 6-15mm strap width, through innovative strap guide. (19mm Strap Machine available on request)


• Stainless steel frame is available for strapping moisturized productions

Foot sealers are widely applied to seal all kinds of plastics films, compound films and aluminum- plastic film.

Application:
Foot sealers are widely used in such industries as foodstuff, special local products, tea, medicine, hardware etc. They are most convenient and economical sealing equipments for shops, families and factories,

Hand impulse sealer with middle cutter are equipped with middle cutter used to cut the bag after sealing, which are widely applied to seal all kinds of plastics films, compound films and aluminum-plastic film.

Application:
Hand impulse sealers with middle cutter is appropriate for sealing PE, PP, PA and PVC foil and also thinner double-coated materials. It widely used in such industries as foodstuff, special local products, tea, medicine, hardware etc. They are most convenient and economical sealing equipments for shops, families and factories.

SPLS-5045S Semiautomatic L-seal cutting machine can convey the products automatically into shrink tunnel through conveying belt for shrink packaging after sealing & cutting. Equipped with shrink tunnel to reach higher working capacity.

Features:

• There is protection mechanism for sealing knife against overheating and cutting.


• Adopt nano-fiber cutter holder and anti sticking thermostable nichrome cutter for sealing & cutting to ensure good sealing without cracking or coking.


• After sealing action, packing product goes in the shrink tunnel automatically by the conveyor belt.


• The height of conveyor belt can be adjusted with handwheel.


• Sealing & cutting time is controlled by time relay accurately.


• Double electromagnets are used to produce more pressure for sealing, which will make sealing much firmer.


• Sliding film support can keep all kinds of shrink films, up to 550mm in width.


• Upper sealing & cutting frame is controlled by return cylinder.


• SPLS 5045S adopt pneumatic device.

Application:

• Semiautomatic L-seal cutting machine is suitable for shrink packing electronic products, hardware, software, foodstuff, printing, pharmacy, floor, ceramics etc in small amount.


• Applied to all kinds of packing materials, such as PVC, POF, PP.

Technical Specification :

SPLS-5045A Automatic L-seal cutting machine is fully automatic unmanned L sealing cutter, widely used for lot production pipelining with high efficiency. The machine is equipped with auto film feeding & perforating device and adjustable product infeed conveying table in order to meet different requirements from different products. SPLS-5545A has a tight lock device especially designed for packing small products.

Features:

• Adopt aluminum alloy cutter with DUPONT Teflon coating that is thermo stable and antis ticking to ensure good sealing without cracking, coking or any smoke pollution.


• The film feeding length is controlled and regulated by magic eye and counter. There is an inductive motor for auto collection of film waste.


• Equipped with two sets of imported photocells, one is used for horizontal detection, the other is for vertical detection, which are easy to switch. The machine can achieve packaging work easily even for thin and small package.


• Adopt digital temperature controller with PID function. Sealing temperature is extremely sensitive and accurate, which can be regulated at will. The cutter itself has function of auto protection in order to avoid wrong cutting.


• Simple size changeover. No need to exchange any moulds or any bag making devices.


• The equipment can be used to pack different sizes of products together for sales promotion


• There is an organic glass safety cover with alarm function around the sealing & cutting part of this machine in order to ensure safety of operator.


• The machine can be connected with the production line to carry out unmanned operation.

Application:
Automatic L-seal cutting machine is suitable for lot shrink wrapping in various industries, such as software, foodstuff, cosmetics, printing, pharmacy, flooring, ceramics, beverage and hardware etc.

Technical Specification :

SP 102TRF Auto flap carton sealer fits for continuous sealing of cartons in the same size, which can be operated alone and also can be equipped into production line.

Features:
The front , side and rear flap of the carton can be folded automatically and smoothly at high speed.

Application:
Sp 102TRF Auto flap carton sealer is widely used in domestic electrical appliance, foodstuffs, general merchandise, medicine and chemical industry etc.3.

Technical Specification :

SP 102TU (Heavy Duty ) Carton Sealer fits for continuous sealing of bigger cartons in the different size, which can be operated alone and also can be equipped into production line.

Application:
SP 102TU (Heavy Duty) Carton Sealer is widely used for bigger & master cartons in domestic electrical appliance, foodstuffs, general merchandise, medicine and chemical industry etc.

Table Top Strapping Machine Model -SP 101is suitable for cartons, calcium-plastic cases, books, soft and hard packages as well as all kinds of articles in square, cylinder or annulations. The machine with high table is suitable for general objects, while that with table in middle height is suitable for those packages that are larger or heavier. Strapping machine with very low table is suitable for the packages that are very large or heavy

Features:

• 1.5 sec. Cycle time


• Stainless Steel. Top.


• Electromagnetic clutch operated


• Separate P.C.B. for Heater , Motor & Feed


• External tension arm and temperature control.


• Fully Imported machine.


• Powder coated body

Application:
SP101 Semiautomatic strapping machine is widely used in various fields such as light industry, foodstuffs, foreign trade, printing

Technical Specification

Technical Specification

Technical Specification

With the objective of providing quality Continuous Band Sealer Machine, we are progressing the industry as the professional Manufacturer, Supplier, Exporter. This machine is extremely tough, consumes energy of 650W and has the sealing speed of 0 to 12 or 0 to 16 m per min, . In addition, Continuous Band Sealer has the sealing width range of 8 to 10 mm, and the film's thickness is 0.08 mm. Adding on, this sealing machinery is very easy to install and maintain. Our equipment are used in various sectors such as printing, sugar, textile, paper mills and others. These are designed from high technology and latest machines and tools as per the international quality norms. Backed with fully fledged fabrication plant, we have been persistently meeting the demands of band sealers. We have a team of highly competent and experienced professionals having vast expertise in the domain of sealing equipment. With their skills, talent and dedication, we are meeting the needs of our clients.

Description:
SPCS 900 Continuous band sealer can seal plastic films made from various materials continuously. There are two models, including horizontal model ( SPOCS 900L), vertical model ( SPCs 900V ) and

Features:

• Constant temperature control and temperature is adjustable.


• Stepless speed regulation

Application:
SPCS 900 continuous band sealer is suitable for sealing small package in foodstuffs, general merchandise, medicine, spices , seeds and chemical industries.