Write a Review
Our Products
Our offered Product range includes Mechanical Fuel Meter, Oval Gear Flowmeter, Water Meter, SINGLE/U-TUBE MANOMETER and Mechanical Flow Meter.
Worldclass Mechanical Fuel Meter, extremely compact, yet easy to read. Robust Aluminum Die Construction. 3 Port Design which allows the meter to be fitted InLine or with the Inlet & outlet ports at Right Angle. Nutating Disc Mechanism offers high tolerance to fuel contamination .For use with Electric Fuel Pumps or gravity flow (with a minimum gravity head of 4'). Register cap can be easily removed & rotated to every 90 orientation for display. Easy user re calibration. Works with both Fuels & Oils
| Flow Range | : | 19-76 LPM |
| Precision | : | ±0.5% |
| Single Count | : | 999L |
| Total Count | : | 99999999 L |
| Working Temperature | : | -10 to 50 C |
| Max Pressure | : | 3.5 Bar |
| Inlet/Outlet | : | 1"BSPT |
| Waight | : | 1.5KG |
We manufacture a wide range of today's most advanced digital gas flow meters. Each gas flow meter meets exacting standards and can be customized to meet your flow gas meter application requirements (often free of charge). For easy system automation, we offer a full suite of digital communications solutions for our mass flow meters and controllers
Rotary piston type water meters are very accurate in small sizes and widely used in 1/2" (15mm) to 2" (50mm) sizes for residential uses. Rotary piston type water meters use water to push a piston. The piston rotation speed is in relation to the velocity of water flow. Rotary piston type water meters generally have an internal strainer element that can protect the pistons from getting clogged.
Single Limb well type Direct Reading Manometer for the precision measurement of pressure, vacuum different pressure flow and liquid level measurement.
Turbine Flow Meters are useful for liquids & gases in general industrial application. They provide excellent performance with quality & reliability. Suitable for as hygienic application. The flowing media engages a vaned rotor causing it to rotate at an angular velocity proportional to flow rate. The pick -of coil senses the spinning motion of the rotor inside the pipe & converts it into a pulsating electrical signal. Summation of the pulsating electrical signal is directly related to the total flow.
|
Media |
Liquids / Gas (Clear) |
Viscosity |
20 cp max |
|
Line Size |
15 NB to 300 NB |
Density |
Upto 2.95 |
|
Flow rate display |
4 Digit LED |
Transmitter Output |
4 to 20 mA DC, Optically Isolated |
|
Totalizer Display |
8 Digit LED |
Relay Output & Rating |
Potentials Free Contacts & 5 Amp / 230 VAC |
|
Linearity |
+/- 0.5% |
Accuracy |
+/- 1% F.S. |
|
Repeatability |
+/- 1% |
Flange |
MS/SS304/SS316 |
|
Process Pressure |
40 kg/cm2 max |
Process Temperature |
150 degC max |
|
Power Supply |
24 V DC, External |
Power Consumption |
<10 VA |
|
Response Time |
< 50 m Sec |
Isolation |
1.4 KV between Input, Output & Power Supply |
|
Transmitter Enclosure |
Flame-proof, IP-65, IIA, IIB CMRI certified |
Process Connections |
150 NB ASA Flanged |
|
Mounting |
In-Line (Horizontal OR Vertical) |
Operating Conditions |
Temperature 0 to 55 C / Humidity 5 to 95% non condensing |
Electromagnetic flow meter is ideal for conductive liquids such as Raw Water, Chilled water, effluents, Potable water etc. Using time proven electromagnetic flow metering principle, the meter achieves a flow meter for pipes from 15mm to 600mm. Since there are no moving parts, the flow meter gives years of maintenance free service. Flow-head can be supplied in Teflon lining or Hard Rubber lining is available with all the features required in a field mounted
|
Media |
Liquids (Clear) |
Viscosity |
200 cp max |
|
Line Size |
15 NB to 300 NB |
Excitation |
Pulsed DC coil |
|
Excitation |
Pulsed DC coil |
Display |
Graphical LCD (128x64) |
|
Transmitter Output |
4 to 20 mA DC, Optically Isolated |
Relay Output & Rating |
Potentials Free Contacts & 5 Amp / 230 VAC |
|
Linearity |
+/- 0.5% |
Accuracy |
+/- 0.5% F.S. |
|
Repeatability |
+/- 1% |
Process Temperature |
150 degC max |
|
Process Pressure |
10 kg/cm2 max |
Lining |
Neoprene / Rubber / PTFE (Teflon) |
|
Flange |
MS/SS304/SS316 |
Electrode |
SS316/Hastalloy C/Titanium/Monel |
|
Power Supply |
24 V DC, External |
Power Consumption |
<10 VA |
|
Response Time |
< 100 m Sec |
Isolation |
1.4 KV between Input, Output & Power Supply |
|
Temperature Coefficient |
+/- 0.1% per DegC |
Transmitter Enclosure |
Flame-proof, IP-65, IIA, IIB CMRI certified |
|
Dimensions |
As per chart on rear |
Process Connections |
ASA B 16.5, Flanged |
|
Mounting |
In-Line (Horizontal OR Vertical) |
Operating Conditions |
Temperature 0 to 55 C / Humidity 5 to 95% non condensing |
MQ KHAN (EX PROCESS EQUIPMENTS)
Plot No.81, Rautara Industrial Estate, Near Shil Octroi Naka, Mahape MIDC Road, Thane - 421204, Maharashtra, Thane West - 400612
Share us via
