• GD-001 is a modified for girdle cutting in all type of square shapes
• This diamond polishing tang can be used in rough and polished cutting as well
• This polishing tank has includes smooth degree screw that offers fully accurate up & down and top & bottom movement
• This polishing dop is equipped with claw that can keep hold of your stone in a proper way
• Printen pot can be applied as per stone size
• Diamond Polishing Dops Supplier.
• Girdle Dop Emerald is a widely used product for girdle finish in square cut diamond
• Using this product, you can do very finest work in girdle finish work for square shape stone
• This product can handle stones from 10 cent to 15 carat level diamonds
• Various size pot can be used (As per the stone size).

• ST-001 is specially modified for parallel balancing from scaif to plate
• This level gaugeworks accurately and precisely below the 5 micron
• It is made out of very strong material that last very long.
• Straightusis extremely essential to obtain balance between plate to scaif
• This level gaugeis very durable without having any bending problem
• This product is packed with robust box for better safety.

• C-004 is modified for fancy stone cut
• It has round tail to get cross grip of stone from bottom
• It is very flexible to adjust gripping diameter of any stone size.
• It is required for bottom side stopper for fancy and other cuts
• It is also useful for all types of rough stones
• It can move up and down due to its long grip.

• It provides additional support for table of a stone.
• This claw has flat surface that holds the grip of a stone.
• C-001 is built from solid carbide thus, it eliminates the reaction of imbalance.
• It has been designed keeping the accuracy of luster in mind.
• Claw Carbide is most required for all types of top side polishing a stone.
• It is commonly used product that requires in routine practice of diamond polishing.

• CL-003 is modified for fancy and other bottom cut works
• It is a fixed equipment so it can be moved in any fixed direction
• This attachment can be attached in 14 MM diameter (In all types of bottom dops) with adjustable screw
• It has adjustable clamp so application can be moved up and down with sliding from front or back
• It can be plugged in 6 MM bouring.
• Pronged Claw Holder Straight is designed to support fancy cuts from bottom side
• It can also be used in round shape polished repairing
• It can be attached with all types of bottom dops.

Diamond Polishing Scaife (E) - $110.00.

 

Features :

• NS-002 is crafted for rough polished luster of stones
• This Diamond polishing disc is Suitable for all types of cuts cutting side
• It has bouring Diameter of 50 MM. So it can be fit in all types of polishing mills
• This polishing tool has layer surface flat ratio under the 5 microns with lapping
• Diamond Polishing Scaif E Maker.

Diamond Polishing Scaife (E+) - $120.0.

 

Features :

• NS-001 is crafted for final polished luster of stones
• Suitable for all types of stone cuts finishing side
• It has bouring Diameter of 50 MM. So it can be fit in all types of polishing mills
• This polishing disc has layer surface flat ratio under the 5 microns with lapping
• Diamond Polishing Scaif Traders
• Diamond Polishing Scaif Maker

• CL-004 fits perfect from flat for the table
• It has facility to change claw angle
• It is equipped with stretchable spring
• It is ideal to hold the force randomly of 1 cent to 10 carat stone
• It can turned from sideways to change the pots easily
• It contains modern screw to position the claw back to forward and vice versa
• Ideal for flat place with using screw.
• Claw Holder GS is newest invented product available at Excel Enterprise
• Very useful for all types of top side stone work.

• EX-012 is a modified for table cutting in all type of shapes
• This diamond polishing tang can be used in rough and polished cutting as well
• This polishing tank has includes smooth degree screw that offers fully accurate up & down and top & bottom movement
• This polishing dop is equipped with claw that can keep hold of your stone in a proper way
• 6MM bouring pot can be applied
• Diamond Polishing Dops Supplier
• Table Dop VS Extreme has two fold long durability compare to plain dop.
• This very lustrurious item has very smooth working operating function at degree angle.
• This advance variant has good strength than plain dop.
• Table Dop Extreme is a widely used product for table finish in diamond
• Using this product, you can do very finest work in table finish work
• This product can handle stones from 10 cent to 15 carat level diamonds
• Various size pot can be used (As per the stone size)

• CG-003 is crafted for accurate dividing of degree 11.25 or 22.5
• Each degree has very accurate spacing that eliminates variation.
• Click Gear 24 X is a widely used product for round cuts
• This product can be used in bottom
• It has divided degree which is very accurate
• It has long life because it is made from hard case still
• This product has color code guideline for facet.

Diamond Polishing Pots - $2.00

 

We are a distinguished Manufacturer and Supplier of Diamond Polishing Pots. We carry out our operations from Gujarat, India. We manufacture them with a high level of precision by using the supreme grade materials and updated techniques. These are highly acknowledged by our clients for their optimum functionality, great performance, and long operational life. We offer them to numerous jewellery designers, all across the country. We have enough capacity to deliver them in bulk quantities, within the stipulated time frame. We offer our Diamond Polishing pots at a reasonable price.

We are backed by a quality control wing that comprises experienced quality inspectors who strictly check all the products before making the final dispatch. This is due to our stern quality checks that we are capable of delivering the best in class range of products. Even the raw material and inputs used undergo several quality inspections to ensure complete quality.

We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

• GD-001 is a modified for girdle cutting in all type of square shapes
• This diamond polishing tang can be used in rough and polished cutting as well
• This polishing tank has includes smooth degree screw that offers fully accurate up & down and top & bottom movement
• This polishing dop is equipped with claw that can keep hold of your stone in a proper way
• Printen pot can be applied as per stone size
• Diamond Polishing Dops Supplier.
• Girdle Dop Emerald is a widely used product for girdle finish in square cut diamond
• Using this product, you can do very finest work in girdle finish work for square shape stone
• This product can handle stones from 10 cent to 15 carat level diamonds
• Various size pot can be used (As per the stone size).

• ST-001 is specially modified for parallel balancing from scaif to plate
• This level gaugeworks accurately and precisely below the 5 micron
• It is made out of very strong material that last very long.
• Straightusis extremely essential to obtain balance between plate to scaif
• This level gaugeis very durable without having any bending problem
• This product is packed with robust box for better safety.

• C-004 is modified for fancy stone cut
• It has round tail to get cross grip of stone from bottom
• It is very flexible to adjust gripping diameter of any stone size.
• It is required for bottom side stopper for fancy and other cuts
• It is also useful for all types of rough stones
• It can move up and down due to its long grip.

• It provides additional support for table of a stone.
• This claw has flat surface that holds the grip of a stone.
• C-001 is built from solid carbide thus, it eliminates the reaction of imbalance.
• It has been designed keeping the accuracy of luster in mind.
• Claw Carbide is most required for all types of top side polishing a stone.
• It is commonly used product that requires in routine practice of diamond polishing.

• CL-003 is modified for fancy and other bottom cut works
• It is a fixed equipment so it can be moved in any fixed direction
• This attachment can be attached in 14 MM diameter (In all types of bottom dops) with adjustable screw
• It has adjustable clamp so application can be moved up and down with sliding from front or back
• It can be plugged in 6 MM bouring.
• Pronged Claw Holder Straight is designed to support fancy cuts from bottom side
• It can also be used in round shape polished repairing
• It can be attached with all types of bottom dops.

Diamond Polishing Scaife (E) - $110.00.

 

Features :

• NS-002 is crafted for rough polished luster of stones
• This Diamond polishing disc is Suitable for all types of cuts cutting side
• It has bouring Diameter of 50 MM. So it can be fit in all types of polishing mills
• This polishing tool has layer surface flat ratio under the 5 microns with lapping
• Diamond Polishing Scaif E Maker.

Diamond Polishing Scaife (E+) - $120.0.

 

Features :

• NS-001 is crafted for final polished luster of stones
• Suitable for all types of stone cuts finishing side
• It has bouring Diameter of 50 MM. So it can be fit in all types of polishing mills
• This polishing disc has layer surface flat ratio under the 5 microns with lapping
• Diamond Polishing Scaif Traders
• Diamond Polishing Scaif Maker

• CL-004 fits perfect from flat for the table
• It has facility to change claw angle
• It is equipped with stretchable spring
• It is ideal to hold the force randomly of 1 cent to 10 carat stone
• It can turned from sideways to change the pots easily
• It contains modern screw to position the claw back to forward and vice versa
• Ideal for flat place with using screw.
• Claw Holder GS is newest invented product available at Excel Enterprise
• Very useful for all types of top side stone work.

• EX-012 is a modified for table cutting in all type of shapes
• This diamond polishing tang can be used in rough and polished cutting as well
• This polishing tank has includes smooth degree screw that offers fully accurate up & down and top & bottom movement
• This polishing dop is equipped with claw that can keep hold of your stone in a proper way
• 6MM bouring pot can be applied
• Diamond Polishing Dops Supplier
• Table Dop VS Extreme has two fold long durability compare to plain dop.
• This very lustrurious item has very smooth working operating function at degree angle.
• This advance variant has good strength than plain dop.
• Table Dop Extreme is a widely used product for table finish in diamond
• Using this product, you can do very finest work in table finish work
• This product can handle stones from 10 cent to 15 carat level diamonds
• Various size pot can be used (As per the stone size)

• CG-003 is crafted for accurate dividing of degree 11.25 or 22.5
• Each degree has very accurate spacing that eliminates variation.
• Click Gear 24 X is a widely used product for round cuts
• This product can be used in bottom
• It has divided degree which is very accurate
• It has long life because it is made from hard case still
• This product has color code guideline for facet.

Diamond Polishing Pots - $2.00

 

We are a distinguished Manufacturer and Supplier of Diamond Polishing Pots. We carry out our operations from Gujarat, India. We manufacture them with a high level of precision by using the supreme grade materials and updated techniques. These are highly acknowledged by our clients for their optimum functionality, great performance, and long operational life. We offer them to numerous jewellery designers, all across the country. We have enough capacity to deliver them in bulk quantities, within the stipulated time frame. We offer our Diamond Polishing pots at a reasonable price.

We are backed by a quality control wing that comprises experienced quality inspectors who strictly check all the products before making the final dispatch. This is due to our stern quality checks that we are capable of delivering the best in class range of products. Even the raw material and inputs used undergo several quality inspections to ensure complete quality.

We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.