Our Products
Material Of Construction :
Cast Iron I Cast Steel I Stainless Steel
End Connections :
Flanged Ends I Screwed End
Type :
“Y” Type I “T” Type I Pot Type I Basket Type
Pressure Rating :
ASA 150# I 300# I PN 40
Size Range :
15mm to 800mmMaterial Of Construction :
Cast Iron I Cast Steel I Stainless Steel
End Connections :
Flanged Ends I Screwed End
Type :
“Y” Type I “T” Type I Pot Type I Basket Type
Pressure Rating :
ASA 150# I 300# I PN 40
Size Range :
15mm to 800mm
The chemical storage tanks are made out of HDPE , PP and
FRP. These are non-corrosive, Light weight , easy maintenance.
Capacity : 0.5 KL to 200 KL
Length : upto 6000 mm
Temp. : 100 deg C
Type : Vertical, Horizantal, Rectangular, Conical bottom
API 609 I BS-5155 I BS EN 593 Material Of Construction : CI , DI , CS , SS Seat & Seals : Nitrile , Neoprene PTFE , Viton , Hypalon , Silicon End Connections: Wafer , Lug Ends Pressure Rating : ASA 125# , 150# , PN 1.0 , PN 1.6 , PN 20 , PN 2.5 Type : Centric Disc Design Operation : Lever I Gear Size Range : 40mm to 500mm
STD - BS-5351 I BS-5159
Material Of Construction :
CI , CS , SS , A 105 , F304 , F316 , CF3
Seat & Seals :
PTFE , Reinforced PTFE , Buna-N , Graphoil , Graphite
End Connections
Screwed to BSPT , NPT , Socket Weld , Butt Weld with extended Nipple ,
Flanged Ends , Butt Weld Ends
Pressure Rating :
ASA 150# , 300# , 800# I 900#
Type :
Single Pc , Two Pc , Three Pc
Operation :
Lever , Gear
Size Range :
6mm to 750mm
We are supplying Demister pad with different material with difference sizes
Mechanical Vapour Recompression-(MVRE)is specially well known for low operating cost as compaire to MEE system. It is the most efficient Evaporation Technique driven by electrical energy thus reduces operating cost of steam and cooling water required in the process. The Centrifugal Turbo Fan/Roots Blower is used to recompress the vapors generated by Evaporator at higher pressure using Electrical power. In MVR these same vapors are used again in evaporator as a heating medium. This eliminates the use of fresh steam. Capacity : 5 KL - 500 KL MOC : SS304, SS316, DUPLEX, SUPER DUPLEX, TITANIUM
Multiple effect evaporator used for treatment of waste water to make zero liquid discharge system. MEE uses the water vapor from one effect as the heating medium for next effect, Which operates at a lower boiling point. The latent heat in water vapor can also be reused by thermally or mechanically compressing the vapor to a higher pressure and temperature. We manufacture Multi Effect Evaporators (MEE) whose functioning is based on Low Consumption of Energy (LCE) resulting in Low Cost of Operation (LCO). Providing customizability, comfort and durability, promising you the best quality. Capacity : 2 KL - 500 KL MOC : SS304, SS316, DUPLEX, SUPER DUPLEX, TITANIUM
We are supplying cooling tower fills and other spare material as per client requirement
Agitated Thin Film Dryer System (ATFD) is ideal apparatus for continous operation for evaporation of water and make concentrated liquid to dry solid. ATFD is trouble free solution for ZLD system which operating on low pressure and low temperature. Min feed concentration : 25% Capacity : 1 m2 to 40 m2 MOC : SS304, SS316, DUPLEX, SUPER DUPLEX, TITANIUM
A Stripping Column is a chemical equipment used for physical separation, where one or more components are removed from a liquid stream by a vapor stream. Capacity : 2 KL - 500 KL MOC : SS304, SS316, DUPLEX, SUPER DUPLEX, TITANIUM
We are supplying single and double mechnaical seal suitable for all make pumps.
MOC : SS
We design and supply different types of reactor of SS, PP-FRP, HDPE, PP with different types mixing blades and agitator. We also provide complete reactor vessel assembly which includes gearbox, motor MS structure , Agitator fittings etc Capacity :- 0.5 to 100 KL Length :- Up to 6000 mm Temp. : 100 deg C
BS-1873 I ND-16 I ND-40
Material Of Construction :
CI / CS / SS
End Connections:
Screwed to BSP / BSPT / NPT /Socket Weld / Butt Weld Ends /
Flanged Ends / Ring Type Joints (RTJ)
Pressure Rating :
ASA 125# / 150# / 300# /PN 16 / PN 40 / PN 64
Operation :
Manual / Gear
Size Range :
15mm to 600mmBS-1873 I ND-16 I ND-40
Material Of Construction :
CI / CS / SS
End Connections:
Screwed to BSP / BSPT / NPT /Socket Weld / Butt Weld Ends /
Flanged Ends / Ring Type Joints (RTJ)
Pressure Rating :
ASA 125# / 150# / 300# /PN 16 / PN 40 / PN 64
Operation :
Manual / Gear
Size Range :
15mm to 600mm
We design and supply of chemical industrial gas scrubber and fumes absorber which are used in scrubbing hazardous gases, these scrubbers are made with high grade material for better result.
We are supplying blowers in PP, which are used in handling corrosive gases and fumes.
We are enlisted as the leading manufacturer and supplier of Rotary Airlocks for our clients as these are hugely in demand among our clients. These Rotary Valve are used in pneumatic converting system to maintain an even flow of raw material and also to hold pressure/vacuum in the system. Rotary Airlocks are widely in use in silo’s bin and hopper for volumetric feed and discharge. Features: Excellent finish Strong Damage resistant Durable Size : Upto 12" We can offer PTFE lined valves alsoWe are enlisted as the leading manufacturer and supplier of Rotary Airlocks for our clients as these are hugely in demand among our clients. These Rotary Valve are used in pneumatic converting system to maintain an even flow of raw material and also to hold pressure/vacuum in the system. Rotary Airlocks are widely in use in silo’s bin and hopper for volumetric feed and discharge. Features: Excellent finish Strong Damage resistant Durable Size : Upto 12" We can offer PTFE lined valves also
We have different types of gauges
1. Pressure gauge
2. Vacuum gauge
3. Temperature gauge
MOC : MS / SSWe have different types of gauges
1. Pressure gauge
2. Vacuum gauge
3. Temperature gauge
MOC : MS / SS
It is an instrument used to measure instant flow rate of liquid and gases.
Type : Metal Tube Rotameter
Glass tube rotameter
Design / calibration confirms to ISA -RP 6.5 AND ISA-RP 6.6
Fluid : Liquid / Gases
Density : upto 2.95
Viscocity : upto 200cp
Design temp: 150deg C
Design Pressure : upto 25 kg/cm2
Measuring range : 100 to 40000 LPH of water/ liquid
3.3 to 1400 NM3/hr of air/gas at NTP
Line size : Upto 4"
Material : SS304, SS304L, SS316, SS316L, PTFE LINED SS
Connection : Flanged to ASA/BS/DIN/Triclover standard screwed to BSP/NPT (M/F)
Accuracy : ±2% of FSD or ±1.5% onrequest
Enclouser : Weather proof , IP65 / FlameproofIt is an instrument used to measure instant flow rate of liquid and gases.
Type : Metal Tube Rotameter
Glass tube rotameter
Design / calibration confirms to ISA -RP 6.5 AND ISA-RP 6.6
Fluid : Liquid / Gases
Density : upto 2.95
Viscocity : upto 200cp
Design temp: 150deg C
Design Pressure : upto 25 kg/cm2
Measuring range : 100 to 40000 LPH of water/ liquid
3.3 to 1400 NM3/hr of air/gas at NTP
Line size : Upto 4"
Material : SS304, SS304L, SS316, SS316L, PTFE LINED SS
Connection : Flanged to ASA/BS/DIN/Triclover standard screwed to BSP/NPT (M/F)
Accuracy : ±2% of FSD or ±1.5% onrequest
Enclouser : Weather proof , IP65 / Flameproof
We are supplying below make Gearbox Bonfiglioli Motovoria Supplying local make gearbox also on request with same gurantee and waranrty Type : Flameproof / Non flameproofWe are supplying below make Gearbox Bonfiglioli Motovoria Supplying local make gearbox also on request with same gurantee and waranrty Type : Flameproof / Non flameproof
We have wide range of magnetic flowmeter
MOC : SSWe have wide range of magnetic flowmeter
MOC : SS