Battery Operated Hydraulic Lifting Trolley

(Available Cap : UP to 500 Kgs, Lifted Heights Up to 750 mm)

Battery Operated Hydraulic Lifting Trolley is extensively used for material handling

purposes and first of its kind machine as it is Eco-friendly machine which runs on battery. Lifting

& Lowering operations are done by DC power Pack and maneuver is done by manually.

Salient Features

Manufactured as cGMP Norms.

The specialty of this product is the heavy duty

Battery with DC Power pack and High lift.

The Platform Carriage is lifted by hydraulic

Cylinder, actuated by a gear pump.

Push Buttons are provided for UP and DOWN

operations.

The electrical controls are simple design from

the view point of maintenance.

Platform Trolley is made from best quality of

steel structure to carry different types of

material and castor wheels are provided to

move very easily in required directions.

Load carrying capacity : up to 500Kg.

Minimum Lift Height : 90 to 100 mm

Maximum Lift Height : UP to 750 mm

Finish: 180 Grid Matt polish.

WATER TRAILER TANKER.( Capacity UP to 10, 000 Ltrs)

Water Trailer Tankers are used for Storing, carrying and supplying of water to desired locations.

The Design of the trailer tanker unit shall be easily accessible for handling, operations and

maintenance. Trailer Tanker has an Elliptical shape S.S water tank of desired capacity with all

necessary mounting & Fitting arrangements. And a chassis shall be suitable load carrying capacity

and fabricated from M.S channels and Plates.

SALIENT FEATURES

S, S Elliptical shape with dished Ends S.S

water tank of desired capacity

S.S Water disbursing manifold

S.S Ladders to climp up on the tank top to

operate Open/ Close man hole cover or filling

port

Spring loaded forged towing hook

S.S Man-hole Cover For Inspection

Heavy Duty Lubricated Turn Table with Proper

Fittings.

Manual Breaking System

Good quality pneumatic tyres with tubes

Heavy Duty leaf springs to dampen,

vibrations/shock.

Heavy Duty Anti Vibration Pad for Tank

Mounting

Drain Plug provided at the bottom of tank

DOUBLE CONE BLENDER (Available Cap: 50 Ltrs to 4000Ltrs)

The double cone blender consists of two cone shaped sections with 45º slopes. Double Cone Blender

is efficient for mixing dry powder and granules homogeneously. All the contact parts are made of

stainless steel. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc

SALIENT FEATURES

All contact parts are made in stainless steel 316 and

outer surfaces are made in Stainless Steel 304.

The conical shape at both ends enables uniform

mixing and easy discharge

The cone is statically balanced to avoid any

excessive load on the gear box and motor.

A wider opening provided for loading material in to

the machine, and processed material discharging

through a butterfly valve.

Baffles provided on the shaft for better mixing.

Machine is operated by a timer.

Maximum care has been taken to ensure safe

operation of the unit.

Safety barrier with Proximity Switch is provided for

safety operation.

Flame proof motor can be supplied as optional.

RAPID MIXER GRANULATOR (Available Cap: 5 Kgs to 800 Kgs)

Rapid Mixer Granulator is used in the pharmaceutical industries for mixing as well as granulation of

ingredients. It is equipped with impeller fitted to the base of the mixing bowl and the chopper is

mounted on the wall of the mixing bowl.

Salient Features:

All contact parts are made in S.S 316 and Outer

surfaces are made in SS - 304

Drive Controlled Motor for variable speed.

Three Blades Main Impeller used for Proper Mixing.

Minimum clearance between bowl and impeller

4 Blades S.S Impeller For Chopper

Discharge Port is operated by pneumatic cylinder

Proximity Switch is provided For Safety Operation

The machine is supplied with standard manual controls.

Optionally, can also be supplied with Programmable

Logic Control [PLC] system and MMI for the visual

display of the operating parameters.

Components of the machine are having easy

accessibility for cleaning.

All electrical & pneumatic parts are pre wired to

simplify installation.

Hinged type discharge port is provided for easy

cleaning.

FLUID BED DRYER (Available Cap : 5 Kgs to 300 Kgs)

Fluid bed dryer is commonly used drying of granules or powder for Chemical, Pharmaceutical and

Food Products. It is highly efficient drying of granulated materials and uniform drying at minimum

temperature with very short time.

SALIENT FEATURES

All contact parts are made in Stainless Steel 316 and outer

surfaces are made in Stainless Steel 304.

Low power consumption

Quick and uniform drying at minimum temperature.

Simple & easy operation

Material is dried by intimate

VIBROSIFTER (AVAILABLE CAP: 12”, 20”, 30”, 34”, 36”, 48”& 60”)

Ideal for gradation and separation of dry powder, granules and semi solids/ liquids.

Dust free arrangement, lead free sieves.

SALIENT FEATURES

Manufactured as per cGMP norms.

Design permits easy washing and cleaning.

Flexible discharge height.

Reduced binding and clogging of the sieves.

Superb aesthetic look

Minimum break-down & maintenance cost.

Less power consumption & running cost.

OCTOGONAL BLENDER (Available Cap : 50 Ltrs to 4000Ltrs) :

Octagonal Blender Machines are very useful for pharmaceutical industries for gentle blending

purpose of dry granules or powder. Based on the body shape an octagonal blender is designed to

process a large volume of material.

SALIENT FEATURES

All contact parts are made in stainless steel 316 and

outer surfaces are made in Stainless Steel 304

Octagonal shaped with rectangular center, conical

Shaped discharge frustum and rectangular Shaped top

frustum

Baffles provided in the shell for optimum mixing.

Butterfly Valve provided For Charging and discharging

All moving parts are enclosed in guards

Safety barrier with Proximity Switch is provided for

safety operation of the blender.

Manual Inching arrangement provided for proper

discharging

LIFTER (LPD) - GMP MODEL ELECTRO HYDRAULIC LIFTING & POSITIONING DEVICE

(Capacity : UP to 1000 Kgs, Lifted HT : UP to 3000 mm)

Lifting & Positioning Device Lifting and positioning device is designed to lift container or storage

bins (IPC) and positioning it above the charging station of process equipment. This device is

mainly used in solid dosage manufacturing and also for liquid compounding operation. This device

is designed to achieve dust free transfer of ' In Process' materials enhancing GMP standard and

eliminates laborious manual operation.

Salient Features

Manufactured as cGMP Norms.

Zero leakage solenoid operated spool type

valves are used.

Double acting hydraulic cylinder with honed

pipe and proper seals are used.

Zero creepage of the lifted load.

Very compact valve system.

Up - Down operation by Remote

Operator panel by inch type push button.

Power pack is mounted on the service

floor with the controls on mast at

operator’s convenient position.

Carriage up movement restriction is by

limit switch.

Carriage lifting by leaf chain – more reliable

as compared to wire rope.

24 VDC controls are provided for remote

panel for operators safety by avoiding

230 V AC.

Non Return Valve at Hydraulic Cylinder

Port For Anti Burst Locking.

Safe Load carrying capacity : up to

1000Kg.

Finish: 180 Grid Matt polish.

VACUUM POWDER TRANSFER SYSTEM (VTS) - (Capacity: Up to 3000 Kgs/hr)

GMP Model VACUUM TRANSFER SYSTEM is unique equipment used for Transferring the powder/product

into process equipment. By using this equipment, a dust free charging can be done as compared to

conventional type or manually charging. This equipment comprises of two units. One is the Vacuum Blower

and Other one is a powder receiver bin with filtration unit. Powder receiver Bin located above the equipment

which you intend to transfer powder/ product. These units will be connected through a food grade flexible

thunder hose.

SALIENT FEATURES

Manufactured as cGMP Norms.

Vacuum Blower is used. Which eliminates

lubrication system and Motor, Pulley V Belt

Etc.

.

Consumes 40% power compared to the

other conventional Equipment.

All sides on the shell are curved

construction. Totally eliminates sharp

corners and cleaning difficulty.

Finish: Inside : Mirror Polish

Out Side Matt polish

Capacity : UP to 3000 Kg/Hr.

Battery Operated Hydraulic Telescopic Stacker

(Capacity : UP to 250 Kgs, Lifted HT : UP to 3000 mm)

Battery Operated Hydraulic Telescopic Stacker is extensively used for material handling

purposes and first of its kind machine as it is Eco-friendly machine which runs on battery. Lifting

& Lowering operations are done by DC power Pack and maneuver is done by manually.

Advantage of Telescopic stacker is that master height of machine is half of the maximum lifted

height.

SALIENT FEATURES

Manufactured as cGMP Norms.

The specialty of this product is the heavy

duty Battery with DC Power Pack. Master

height of machine is half of the maximum

lifted height.

The Stacker Carriage is lifted by hydraulic

Cylinder, actuated by a gear pump with

Motor.

The electrical controls are simple design

from the view point of maintenance.

The Stacker Carriage is made from best

quality of steel structure and to carry

material and castor wheels used to move

very easily in required directions.

Battery Operated Hydraulic Lifting Trolley

(Available Cap : UP to 500 Kgs, Lifted Heights Up to 750 mm)

Battery Operated Hydraulic Lifting Trolley is extensively used for material handling

purposes and first of its kind machine as it is Eco-friendly machine which runs on battery. Lifting

& Lowering operations are done by DC power Pack and maneuver is done by manually.

Salient Features

Manufactured as cGMP Norms.

The specialty of this product is the heavy duty

Battery with DC Power pack and High lift.

The Platform Carriage is lifted by hydraulic

Cylinder, actuated by a gear pump.

Push Buttons are provided for UP and DOWN

operations.

The electrical controls are simple design from

the view point of maintenance.

Platform Trolley is made from best quality of

steel structure to carry different types of

material and castor wheels are provided to

move very easily in required directions.

Load carrying capacity : up to 500Kg.

Minimum Lift Height : 90 to 100 mm

Maximum Lift Height : UP to 750 mm

Finish: 180 Grid Matt polish.

WATER TRAILER TANKER.( Capacity UP to 10, 000 Ltrs)

Water Trailer Tankers are used for Storing, carrying and supplying of water to desired locations.

The Design of the trailer tanker unit shall be easily accessible for handling, operations and

maintenance. Trailer Tanker has an Elliptical shape S.S water tank of desired capacity with all

necessary mounting & Fitting arrangements. And a chassis shall be suitable load carrying capacity

and fabricated from M.S channels and Plates.

SALIENT FEATURES

S, S Elliptical shape with dished Ends S.S

water tank of desired capacity

S.S Water disbursing manifold

S.S Ladders to climp up on the tank top to

operate Open/ Close man hole cover or filling

port

Spring loaded forged towing hook

S.S Man-hole Cover For Inspection

Heavy Duty Lubricated Turn Table with Proper

Fittings.

Manual Breaking System

Good quality pneumatic tyres with tubes

Heavy Duty leaf springs to dampen,

vibrations/shock.

Heavy Duty Anti Vibration Pad for Tank

Mounting

Drain Plug provided at the bottom of tank

DOUBLE CONE BLENDER (Available Cap: 50 Ltrs to 4000Ltrs)

The double cone blender consists of two cone shaped sections with 45º slopes. Double Cone Blender

is efficient for mixing dry powder and granules homogeneously. All the contact parts are made of

stainless steel. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc

SALIENT FEATURES

All contact parts are made in stainless steel 316 and

outer surfaces are made in Stainless Steel 304.

The conical shape at both ends enables uniform

mixing and easy discharge

The cone is statically balanced to avoid any

excessive load on the gear box and motor.

A wider opening provided for loading material in to

the machine, and processed material discharging

through a butterfly valve.

Baffles provided on the shaft for better mixing.

Machine is operated by a timer.

Maximum care has been taken to ensure safe

operation of the unit.

Safety barrier with Proximity Switch is provided for

safety operation.

Flame proof motor can be supplied as optional.

RAPID MIXER GRANULATOR (Available Cap: 5 Kgs to 800 Kgs)

Rapid Mixer Granulator is used in the pharmaceutical industries for mixing as well as granulation of

ingredients. It is equipped with impeller fitted to the base of the mixing bowl and the chopper is

mounted on the wall of the mixing bowl.

Salient Features:

All contact parts are made in S.S 316 and Outer

surfaces are made in SS - 304

Drive Controlled Motor for variable speed.

Three Blades Main Impeller used for Proper Mixing.

Minimum clearance between bowl and impeller

4 Blades S.S Impeller For Chopper

Discharge Port is operated by pneumatic cylinder

Proximity Switch is provided For Safety Operation

The machine is supplied with standard manual controls.

Optionally, can also be supplied with Programmable

Logic Control [PLC] system and MMI for the visual

display of the operating parameters.

Components of the machine are having easy

accessibility for cleaning.

All electrical & pneumatic parts are pre wired to

simplify installation.

Hinged type discharge port is provided for easy

cleaning.

FLUID BED DRYER (Available Cap : 5 Kgs to 300 Kgs)

Fluid bed dryer is commonly used drying of granules or powder for Chemical, Pharmaceutical and

Food Products. It is highly efficient drying of granulated materials and uniform drying at minimum

temperature with very short time.

SALIENT FEATURES

All contact parts are made in Stainless Steel 316 and outer

surfaces are made in Stainless Steel 304.

Low power consumption

Quick and uniform drying at minimum temperature.

Simple & easy operation

Material is dried by intimate

VIBROSIFTER (AVAILABLE CAP: 12”, 20”, 30”, 34”, 36”, 48”& 60”)

Ideal for gradation and separation of dry powder, granules and semi solids/ liquids.

Dust free arrangement, lead free sieves.

SALIENT FEATURES

Manufactured as per cGMP norms.

Design permits easy washing and cleaning.

Flexible discharge height.

Reduced binding and clogging of the sieves.

Superb aesthetic look

Minimum break-down & maintenance cost.

Less power consumption & running cost.

OCTOGONAL BLENDER (Available Cap : 50 Ltrs to 4000Ltrs) :

Octagonal Blender Machines are very useful for pharmaceutical industries for gentle blending

purpose of dry granules or powder. Based on the body shape an octagonal blender is designed to

process a large volume of material.

SALIENT FEATURES

All contact parts are made in stainless steel 316 and

outer surfaces are made in Stainless Steel 304

Octagonal shaped with rectangular center, conical

Shaped discharge frustum and rectangular Shaped top

frustum

Baffles provided in the shell for optimum mixing.

Butterfly Valve provided For Charging and discharging

All moving parts are enclosed in guards

Safety barrier with Proximity Switch is provided for

safety operation of the blender.

Manual Inching arrangement provided for proper

discharging

LIFTER (LPD) - GMP MODEL ELECTRO HYDRAULIC LIFTING & POSITIONING DEVICE

(Capacity : UP to 1000 Kgs, Lifted HT : UP to 3000 mm)

Lifting & Positioning Device Lifting and positioning device is designed to lift container or storage

bins (IPC) and positioning it above the charging station of process equipment. This device is

mainly used in solid dosage manufacturing and also for liquid compounding operation. This device

is designed to achieve dust free transfer of ' In Process' materials enhancing GMP standard and

eliminates laborious manual operation.

Salient Features

Manufactured as cGMP Norms.

Zero leakage solenoid operated spool type

valves are used.

Double acting hydraulic cylinder with honed

pipe and proper seals are used.

Zero creepage of the lifted load.

Very compact valve system.

Up - Down operation by Remote

Operator panel by inch type push button.

Power pack is mounted on the service

floor with the controls on mast at

operator’s convenient position.

Carriage up movement restriction is by

limit switch.

Carriage lifting by leaf chain – more reliable

as compared to wire rope.

24 VDC controls are provided for remote

panel for operators safety by avoiding

230 V AC.

Non Return Valve at Hydraulic Cylinder

Port For Anti Burst Locking.

Safe Load carrying capacity : up to

1000Kg.

Finish: 180 Grid Matt polish.

VACUUM POWDER TRANSFER SYSTEM (VTS) - (Capacity: Up to 3000 Kgs/hr)

GMP Model VACUUM TRANSFER SYSTEM is unique equipment used for Transferring the powder/product

into process equipment. By using this equipment, a dust free charging can be done as compared to

conventional type or manually charging. This equipment comprises of two units. One is the Vacuum Blower

and Other one is a powder receiver bin with filtration unit. Powder receiver Bin located above the equipment

which you intend to transfer powder/ product. These units will be connected through a food grade flexible

thunder hose.

SALIENT FEATURES

Manufactured as cGMP Norms.

Vacuum Blower is used. Which eliminates

lubrication system and Motor, Pulley V Belt

Etc.

.

Consumes 40% power compared to the

other conventional Equipment.

All sides on the shell are curved

construction. Totally eliminates sharp

corners and cleaning difficulty.

Finish: Inside : Mirror Polish

Out Side Matt polish

Capacity : UP to 3000 Kg/Hr.

Battery Operated Hydraulic Telescopic Stacker

(Capacity : UP to 250 Kgs, Lifted HT : UP to 3000 mm)

Battery Operated Hydraulic Telescopic Stacker is extensively used for material handling

purposes and first of its kind machine as it is Eco-friendly machine which runs on battery. Lifting

& Lowering operations are done by DC power Pack and maneuver is done by manually.

Advantage of Telescopic stacker is that master height of machine is half of the maximum lifted

height.

SALIENT FEATURES

Manufactured as cGMP Norms.

The specialty of this product is the heavy

duty Battery with DC Power Pack. Master

height of machine is half of the maximum

lifted height.

The Stacker Carriage is lifted by hydraulic

Cylinder, actuated by a gear pump with

Motor.

The electrical controls are simple design

from the view point of maintenance.

The Stacker Carriage is made from best

quality of steel structure and to carry

material and castor wheels used to move

very easily in required directions.