Filtek (i) Pvt. Ltd.

Mumbai Pune Hwy, Pune, Maharashtra

Our Centrifugal Oil Cleaner (CK600). CK- 600 is used for tank capacities from 1000 liters to 4000 liters. It can separate the finest particles upto 1 micron from the oil.The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean neat cutting fluids as well as water based coolants of industrial machines such as Honing, Reaming, Grinding, Tool & Cutter, Component washing etc and is extremely effective in removing the metal dust contamination and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts. The inlet to the centrifuge is taken from the fluid tank and drained back to the tank through the Filtek Centrifuge

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils of cement mills and is extremely effective in removing the cement dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts.   The inlet to the centrifuge is taken from the oil tank and the oil is drained back to the tank through the side door fitted with the filtek Centrifuge.  

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the coolant of wire and cable drawing machines and is extremely effective in removing the wear metal and dust contamination which is removed when the wire is drawn from blocks of Copper or Aluminum. The wire while being drawn through the die, heats up the die and tool which is cooled by the coolant. As more tiny wear metal particles get into the coolant, the viscosity increases and affects heat transfer adversely. The Centrifuge is capable of removing these tiny particles to maintain the viscosity of the coolant and have effective heat transfer reducing the number of wire breakages, The Centrifuge being a cleanable unit has no consumable parts and replaces the conventional paper band filter. The inlet to the centrifuge is taken from the oil tank and the oil is drained back to the tank under gravity.

IMPURITIES IN OIL With increasing frequency, utility owners and operators are experiencing a significantly increased need for oil handling and treatment requirement. Any boiler's capability to burn commercial grades of Heavy Fuel Oil is dependent on the fuel characteristics and the level of contaminants in the fuel. As fuel grade and quality decrease, the resultant impact on the burner’s operating reliability and economics will be strongly influenced by the ability of fuel handling systems available to provide properly treated fuel. Insolubles in the Thermic fluid can cause havoc with the performance of the system, even leading to choking of the complete system. This is one of the major reasons for discontinuing the use of Thermic fluid - the presence of percentage insolubles of more than 1%. Maximum particle size going into the system for combustion would be 125 microns, which would be the maximum for a 120 mesh filter can screen. The particles below 125 micron are the main cause of wear of burner nozzles in, thus causing decrease in combustion efficiency. Analysis shows that a maximum percentage of impurities in sediments are in the range of 0.25 to 100 microns, which is way below the capacity of any normal mesh filtration system. Due to routine maintenance required for cleaning, large number of man hours spent on this activity. Wastage o

The Filtek Centrifugal Oil Cleaner model FT025060200400600 are widely used on land based as well as marine generators since the last 40 years. This is a very effective bypass lube oil filtration to maintain the quality of lube oil for a longer period. The centrifuge is driven by the lube oil pressure of the engine to clean the oil down to 1 micron level. This cleanable unit requires no consumables and is very effective in increasing the oil drain intervals as well as the time between engine overhauls. The inlet to the centrifuge is taken from the lube oil pumplube oil cooler and the oil is drained back to the tank through the tappet coverinspection platecrankcase cover under gravity. A safety Cut-off valve protects the engine from oil starvation at low idle RPM. Negligible pressure drop paves the way for a safe and efficient oil filtration unit. Selection of Filtek Centrifuge model is based on the oil sump capacity of the engine.

Centrifugal Oil Cleaner model 600s are widely in use on ALCO 251 series Locomotives for Mainline Diesel Engines in India. The fitment is done at the Diesel Loco Works at Varanasi where over 3000 engines have been in operation since the last 14 years. The inlet to the centrifuge is sourced from the lube pump outlet and the drain given through the crankcase door. This cleanable unit requires no consumables and is very effective in increasing the filter drain intervals as well as the time between engine overhauls. A safety Cut-off valve set to 2.5 BAR protects the engine from oil starvation at low idle RPM. Negligible pressure drop paves the way for a safe and efficient oil filtration unit.

Filtek FT Centrifuges are used successfully on Bio Diesel Manufacturing Systems for fine filtration of biodiesel. All contamination as well as wax and gummy insolubles are effectively removed  

We are offering centrifugal filters. Typically in a diesel engine, less than 10% of pressurized oil flow is fed through the centrifuge inlet port. Oil enters the rotors assembly though a central spindle. The rotor chamber becomes pressurized and the oil exits the rotor via 2 tangentially opposed nozzles in the rotor base. The action of oil exiting through the nozzles gives the rotor reverse directional speed, its rpm begins directly, proportional to the inlet oil pressure and flow. Two precision-machined bushes allow it to spin smoothly around the spindle journals, generating high rotational speeds.

We offer filtek portable oil..