Fine Cement Products

Rameshwar Nagar, Rajkot, Gujarat

Weber SBR Waterproof Wall Coating serves as an excellent polymer modifier for concrete or cement mortar. It is basically styrene butadiene co polymer latex liquid which can be used for the waterproofing and repairs of spalled concrete. It can be used for several purposes as a binding agent, waterproofing agent, polymer modifier and for structural repairs. It offers an excellent bond making the structure impermeable to liquids. Besides, it is chemical, abrasion, impact and slip resistance.

Benifits

• It provides an excellent bond to the existing substrate.
• It makes the structure impermeable to liquids.
• It improves chemical, abrasion and impact resistance.
• It has improved flexural strength and hence avoids cracking.
• Shrinkage cracks are reduced.
• Thinner screeds can be cast for similar strengths, reducing weight and material used.
• It has excellent slip resistance when used for flooring screeds.

Recommandation

• Bonding agent-Old to new concrete bonding, bonding for plasters.
• Structural repairs – For spalled concrete, beams, precast segments etc.
• Waterproofing ( Internal) - Lift pits, basements, toilets etc.
• Polymer modifier for floor screeds - Can be used as an underlay for epoxy floorings.

Direction to Use

• Surface Preperation

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.

  • Corroded reinforcement bars should be exposed around their full circumference, should then be cleaned to remove all the loose particles and should be treated with an anti-corrosive product.

• Application as a slurry bond coat

  • Surface must be thoroughly dampened before the application and excess water should be removed.

  • weber sbr is a ready to use liquid which is dispensed into the water as per the proportions given in the *recommendation chart to form slurry.

  • Apply one coat of the slurry using a stiff brush, working it well into the surface.

  • Place the new concrete while the bond coat is a little tacky.

• As a concrete repair and bedding mortar

  • Expose the spalled concrete upto the reinforcement bars.

  • Corroded reinforcement bars should be exposed around their full circumference and then be cleaned to remove all the loose particles.They should then be treated with anti corrosive product.

  • Apply weber sbr as a bonding agent between the existing and new repair mortar as recommended above.

  • Mix weber sbr and water thoroughly in one bucket, and mix sand and cement as per the *recommendation chart given in another bucket.Then add the liquid mix to the mortar mix and ensure thorough mixing to form slurry. As the bond coat is slightly tacky, apply the slurry mix and build up the entire cross section to be repaired.

Note : weber sbr can be used only for repairs in internal applications only.

• As a waterproof slurry coat

  • Surface must be thoroughly dampened before the application and excess water should be removed.

  • Mix weber sbr and water thoroughly and add cement into this mix as per the proportions given in the *recommendation chart.

  • Apply the first coat of slurry using a brush and apply the second coat in the direction perpendicular to the previous coat.

  • Apply the second coat while the first coat is slightly tacky, approximately after 2 hours.

• As a modifier for plasters

  • Mix weber sbr and water in one bucket, and mix cement and sand in another bucket as per the *recommendation chart. Mix the liquid to the mortar in order to obtain a polymer modified plaster.

  • This modified plaster can be used for internal as well as external applications.

  • It can also be used for bonding the plaster to the existing substrate for internal surfaces.

Weber Crete Waterproof Wall Coatings is an acrylic additive that serves as a water proof additive for coating concrete structures. They can be used on both the internal as well as the external walls for not only waterproofing but also for bonding and repairs. It offers an excellent bond for the substrate enhancing the properties of concrete and mortar mix. It is also injected in the concrete structures in the form of cement slurry. We make it available in different quantities as per the requirements of the customers.

Benifits

• It is a multipurpose additive used for enhancing the properties of concrete/ mortar mix.
• It can be used for internal as well as external applications.
• Non toxic, suitable for use in potable water.
• It improves the workability of mixes.
• It makes the structure impermeable to liquids.
• It provides an excellent bond to the existing substrate.
• No protection screed is required for this waterproofing system

Recommendation

• Waterproofing of all concrete structures like terraces, external facades, swimming pools or any other exposed area.
• It can also be used for internal waterproofing like basement, lift pits, bathrooms etc.
• Repairs of spalled columns, beams and any other concrete structure for internal as well as external surfaces.
• It can also be used for bonding of plasters to the existing substrate for external applications.
• It is used for injection into concrete/rock structures in the form  of cement slurry.

Direction to use

• Surface Preperation

  • Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.

  • Surface to be treated with subsequent polymer mortar should be saturated with water

• Application as a slurry bond coat

  • Surface must be thoroughly dampened before the application and excess water to be removed.

  • weber crete is a ready to use liquid which is directly mixed with cement as per the proportions given in the *recommendation chart to form slurry.

  • Apply one coat of the slurry using a stiff brush, working it well into the surface. '

  • Place the new concrete while the bond coat is a little tacky.

• As a slurry waterproof coating

  • Surface must be thoroughly dampened prior to application and excess water must be removed.

  • Mix weber crete and cement thoroughly as per the proportions given in the recommendation chart. Apply the first coat of slurry using a brush and apply the second coat in the direction perpendicular to the previous coat. Apply the second coat while the first coat is slightly tacky, approximately after 2 hours.As a modified concrete repair mortar

  • Expose the spalled concrete upto the reinforcement bars.Corroded reinforcement bars should be exposed around their full circumference. It should then be cleaned to remove all the loose particles and is required to be treated with an anti-corrosive product.

  • Apply weber crete as a bonding agent between the existing and new repair mortar as recommended above.

  • Mix weber crete and water thoroughly in one bucket and mix sand and cement in another bucket as per the proportions given in the *recommendation chart. Then add the liquid mix to the mortar mix and ensure thorough mixing to form slurry. As the bond coat is slightly tacky, apply the slurry mix and build up the entire cross section to be repaired.

• As a modifier for plasters

  • Mix weber crete, with cement, sand and water as per the *recommendation chart given, in order to obtain a polymer modified plaster.

  • This modified plaster can be used for internal as well as external applications.

  • It can also be used for bonding the plaster to the existing substrate for the internal surfaces.