Other Products / Services #5456941

Three/ Five Finger Gloves made of Aluminised Glass Fibre Fabric with woollen lining sizes from 14" to 18"

Molten Metal Splash Apparels are intended to be used in areas where there is continuous exposure to sparks and splashes.

Metal Protection garments protect against splash from molten metals such as aluminum, iron, etc. These are made from NOMEX MetalPro and NOMEX MetalPro Plus fabrics. Garment made from both NOMEX MetalPro and NOMEX MetalPro Plus fabrics are Dupont is invention & have been developed to achieve uncompromised protection with maximum comfort and improved wear life.

The highly engineered fabric in these garments provides a soft, lightweight feel, but protects against molten metal splash, radiant heat, flame and other smelting hazards. The fabrics resist molten metal splashes, even when they occur repeatedly in the same area.

Features:
QualityMolten metal protective clothing offers protection for those working with hot metals day in and day out. The high quality of our garments keeps you safe in the hottest of conditions, without any loss of comfort.

Flexibility
You need molten metal protective clothing, but you need to move sometimes extremely quickly! There is nothing like being able to move when you need to move with freedom of movement you need in your workplace environment. Yes, you can move freely while staying cool in the hottest environment and atmosphere.

Value
Just because you need flame protection does not mean you do not live on a budget. You will find this molten metal protection is developed to be a cost effective solutions to your needs. No, this is not a cheap purchase, but you are making an investment in your future with each purchase. If you did not need optimal protection, you could purchase an oven mitt, but you need the maximum protection over a long period of time. This means you invest into your career and your own safety. This is definitely a wise decision.

Good fit
There is noting as bad as having workplace apparel that does not fit appropriately. This is not a problem when you turn to molten metal protective clothing because this comes in a wide array of sizes and choices perfect for men as well as women. There is nothing comparative to the exceptional quality you get when you trust molten metal apparel.

Flame Retardant Fabric / Garments
Flame 100% Cotton fabric is teated with chemicals to impart Durable Flame Retardant (FR) properities as per Textiles Comittee's process. Chemicals react with Cellulose to form a permanent bond. There is no adverse effect to wearer's skin or comfort. Self extinguishing property avoids further damage. FR Fabric is used for the work wear like overall, Coats, & Trouser.

Flame Retardant Overall
Flame Retardant Overall is an insustrial Garment with full body and long sleeves, Five Pockets, Heat Proof Buttton or Zipper are used as Front Closer. Sizes available as required.

Flame Retardant Coat
Full Sleeves Coat with 2/3 pocket & heat resistant Buttons.
Size : Small, Medium, Large.

Flame Retardant Trousers
Trousers with 2 side & 1 heap Pocket.
Front Button Closer.

Flame Retardant Apron
Kitchen type Apron with string to tie at waisst.

Applications
These types of Garments are used as a protective workwear in Foundries, Metal Fabricating Sheds, Welding Area, Fire Fighting, Cooks Apron & Military Uniforms.

Fabric can be treated with FR Chemicals & Used for surnishing Home, Hotels, Theatres etc.

Made of Nomex AP fabric 8 oz/Sq.yd. quality.Used in electrical arc hazardous area.

NomexAP Button Front Deluxe Shirt* Branded, topstitched coller. Topstitched cuffs w/ adjustable button closures. Placket front w/ button closure.* Tailored sleeeve placket* Autoclaved

NomexAP Work Pant* Innerlined waistband w/ button closure. Two slack style front pockets, left hip w/button closeure* Permanent crease* Autoclaved

Specification :
1. Double cloase front, Velcro fixing device and safety zipper.
2. Throat safeguard design adjust by Velcro ixing device
3. Double supper large pocket on the frock and pants, one radio pocixets on the chest and a Concealed paper pocket between double close fronts.
4. Cuff can be adjusted by Velcro and with fireproof, waterproof and thumb ring design.
5.Extra patches shall be placed to the bottom of jacket's arms to increase the movement capacity.
6.The reflector bands shall be sewed as rounded to the cuffs, foot, chest and the back parts of the jackets.
7.Wasit of the trouser shall be higher at least 30 cm than jacket's foot.
8.Elastic girdle and Elastic suspenders shall be easily opening-locking and adjustable clips.
9.The sewing thread shall be meta arami.

The outlook of Industrial safety has changed abruptly in the fourth quarter of the last century. Labours are provided with latest equipment and safety tools carefully designed for specific end user. Handling hot metal parts, working in hot enviornment or in our area where inflammable chemicals are either produced or handled. Previously, chemically treated cotton uniforms were used but they were expensive, FR property declining with every washing, even their life was unusually less. 'NOMEX' is registered trade mark of Dupont, U.S.A. which is an aromatic Nylon which has Flame Retardant properties by virtue of chemical synthesis. This also helps in insulating properties. Hence the garments made from this fibre exhibits very high standards of Flame Retardancy for the full life of garments.

FEATURES :

• High protective collar with throat guard
• Front zip closure covered by storm flap
• Tab for Radio
• Chest pocket, two thigh pockets
• Single layer unlined
• Elastic in back waist
• Pen pocket on left sleeve
• Epaulettes on shoulders
• 3M flame resistant retroreflective tape
• Silver colour
• All seams topstitched
• All stress points bar-tacked

Fire Proximity Suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji. Lonavla Maharashtra

Application
These Suits are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like Petrochemical plants. Foundries, plant, steel, glass, ceramics & Defence.

Complete Suit consists of the following:-
Overall:
An Overall is one piece suit or 2 pc. Jacket & trouser having Zipper & Stud fastner with or without Pouch on back to accommodate breathing apparatus. Stitching is done by KEVLAR Threads.

Hood:
It houses a fibre glass helmet for firemen as per IS-2745. Two elastisized straps to cover well below the shoulders. Hood has the visor consisting of curved plain poly carbonate and tinted acrylic & outer layer of thin transparent mica.

Gloves:
14 long five fingered type Gloves having stud fastener for better securing at wrist.

Boots:
Boots are made of upper layer of aluminised glass fibre fabric & inner lining of high quality leather, with heavy duty zipper covered with aluminised fabric flap with extra stud for double protection. Special Neoprene Rubber sole in non skid pattern for use in oil / chemical / grease area. Metal toe for extra air-room & protection.

Application :
These Suits are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like Petrochemical plants. Foundries, plant, steel, glass, ceramics & Defence.

Series NA2K & Series A3K developed and manufactured by Modern Apparels are engineered to the highest levels of protection to the Firefighters & Rescuers against extreme temperatures.
These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).

Applications :
Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation.

Specification:-
Suit made of multiple layers for maximum heat protection. Breathing apparatus required.
Suit consist of :-
HOOD:Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection.

COAT:Designed to be worn with breathing apparatus. Double storm fly

Front :Flame seal with drawstring at coat bottom.

PANT:High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms.
BOOTS:Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover.

MITTS: Heavy weight construction made with Aluminised fabric.

WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.