Fire Projects Pvt Ltd Ahmedabad, Gujarat

Fire Project has make several installation of SecuriRAS ASD 535 aspirating smoke detector, which is the new generation of highly sensitive, active smoke detection systems. It offers application-specific sensitivity adjustment alongside pre-signalling and pollution analyses. The SecuriRAS ASD 535 detects even minuscule glowing and smouldering fires and can be deployed practically anywhere.   Typical applications include: • Room surveillance • High-rack warehouses and distribution centres • Archive rooms • Intermediate ceilings and raised floors • Large halls • Museums, galleries, theatres, cinemas • Cultural artefact collections, historical buildings • Airports • Informatics and computer centres • Telecommunication centres • Laboratory and research centres • Electronic measuring rooms • Transformer rooms • Clean rooms • Refrigerated warehouses • Property surveillance • Telecommunication facilities • High and low-voltage distribution cabinets • Display cases • IT installations • CNC control systems • Invisible applications • Protection of cultural assets • Prison cells   Select Fire Projects for new implementation of Securiton ASD - 535 aspirating smoke detection is most effective way for very early smoke detection application for small to medium size datacenter, UPS room, medical facilities, and telecommunication facilities. We support our clients from Designing up to Commissioning up to AMC. We also provide AMC–Annual Maintenance Contracts for all types of Fire & security Systems. If you required new installation or AMC of VESDA system, contact Fire Projects today! FEATURE 1 or 2 sampling lines with separate air flow monitoring • EN 54-20, Class A, B, and C • VdS certified calculation software: ASD PipeFlow enables efficient, asymmetrical pipe layout • Resolution • Insensitive to pollutants thanks to particle suppression (patent pending) • Auto-learning function • High performance suction (> 400 Pa vacuum) • Low noise level, compliant with ISO 11690-1 • 5 alarm levels (3 pre-alarms and 2 alarms) • Refined smoke detection thanks to high-dynamic (HD) sensors specification Permitted voltage range/Operating current : 10.5–30 V DC/290 mA typical (at 24 V DC) • Alarm sensitivity: 0.02%/m–10%/m (0.00087–0.457 dB/m)  • Pre-signals 1, 2 and 3, programmable in 10% increments: 0.002–9%/m • Interfaces (alarm, fault, programmable), service interface: 3 relays/open collector • Ambient operating temperature: –30 °C to +60 °C • Protection class: IP 54 ICE 529 • Housing dimensions: 263 × 397 × 146 mm • Housing colour: Light grey RAL 2807005, Charcoal RAL 3002005  • Housing material/Weight: ABS blend, UL 94-V0/Approx. 3850 g  • Display and control Standard: 1 LED (green) POWER, 1 or 2 LEDs (yellow) Fault • Deluxe design: supplementary 10 or 20 LEDs (yellow) for smoke level display • Event data memory: Max. 430 events

he PLENA all-in-one mixer amplifier is a versatile solution for public address, emergency announcements and back-ground-music (BGM) requirements. This high-performance device is easy to install and operate.   Typical applications of PLENA all-in-one 180W mixer amplifier include use in supermarkets, restaurants, schools, retail chains, canteens, places of worship, gymnasiums etc where BGM provides the right atmosphere, at the same time announcements can be made clearly and with ease.   The All-in-one amplifier is mixer amplifier with inbuilt music source.The All‑in‑one unit can provide hours of uninterrupted music from USB or SD flash memory.The unit also has a built in FM tuner with presets. To ensure for optimum performance, the All‑in‑one unit has no moving parts, such as hard drives that can fail or wear out. The unit is supplied with an IR remote control for controlling the music source.The unit can be rack mounted by using the brackets that can be procured seperately. feature Two Zone output 4 microphone inputs with independent level control USB drive and SD card for MP3 playback Built-in FM tuner with preset memories 100V/Telephone input with priority and VOX Parts included : All-in-one mixer amplifier, Power cord, Remote control for Music source, FM Antenna with connector specification Electrical: Mains Power Supply: Voltage 230 VAC, ±10%, 50 Hz Inrush Current PLN-1AIO090-IN: 13A Battery power supply Voltage: 24VDC ±15% Current: 9A Performance: Max/Rated Output Power: 270W/180W Frequency response: 80Hz to 18kHz Distortion: 5 kOhm (line) S/N at rated power: ≥60 dB (mic); 65 dB (line) CMRR (mic.): >40 dB Phantom power supply: 9 V via 1.2 kohm (mic) Speech filter: -3 dB @ 315 Hz Music Input:  Connector: Cinch, stereo converted to mono Sensitivity: 200 mV to 300 mV Impedance: 22 kohm S/N at rated power: ≥70 dB

Fire Projects relay on Ravel for conventional fire alarm panel. The RE-2554/8 is a 4/8 zone UL Listed Conventional Fire Alarm control Panel. These control panels are designed to be used in small & medium commercial industries, buildings, hotels, schools, etc. and are compatible with conventional detectors, manual call points and normally open dry contact devices. Fire projects recommend Ravel RE-2554/8 conventional fire alarm control panel which has been designed to comply NFPA-72 guideline and other local codes. Fire alarm control panel is self-contained with integral power supply and space provision for two sealed lead-acid standby batteries. Ravel fire alarm control panel control function with microprocessor and test and isolate functions are included. It enable repeater function of panel status output.  RE-2554/8 has optional function of RS 485 communication facilities along with lamp test and walk test. Fire Projects has succesfully programmed Ravel Re-2554/8 for NAC's, IDC's, Trouble reminder, Earth fault annuciation, Supervisory mode with alarm verification facility.  Conventional Ravel RE-2554/8 fire alarm control panel installed by fire projects, receive information/signal from field devices called smoke detector, heat detector, beam detector, ultra violet flame detector for fire detection and fire alarm control panel start giving alarming. Conventional Ravel RE-2554/8 fire alarm control panel required local power supply and it provide electrical energy to field devices as well as signaling devices called manual call point and sounder, hooter or sounder with flash.     We support our clients from Designing up to Commissioning to AMC. We also provide AMC–Annual Maintenance Contracts for all types of Fire & security Systems. If you required new installation or AMC of fire alarm system, contact Fire Projects today!

• TypePortable
• ApplicationRat Repellent
• Power SourceElectric
• Automation GradeSemi Automatic
• Voltage220 V
• Warranty1 Year

Rodent repellent system installed by Fire Projects generate high frequency sound (well above the 20 KHz frequency which is the upper limit of the hearing range of the human ear).They emit intensive sound at high decibel levels (sound pressure) that is audible and painful to pests but is inaudible and harmless to humans. The pests will usually leave the area being protected by the ultrasound. They do not get killed.   The powerful sound waves generated by the transducers of Maser repellers are within the hearing range of many pests and cause them pain and discomfort. Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.