Faridabad, Haryana, India
GST : 06AAACF5853F1ZS
Verified
Add Review
Our Products
Fire Suppression Systems
Fitted on a TATA – ACE 209, 407, 709 / Ashok Leyland, Cargo / Eicher, Swaraj Mazda chassis, this relatively smaller size tenders houses the compact water mist system. The system specifications for this product can be customised based on the customers’ requirement.
Foam produced by protein foam technology is tough, stable and heat resistant and covers the burning hydrocarbon fuel surface rapidly. The high stability of the foam blanket ensures the risk of re-ignition and provides excellent protection against ‘burn-back’, should any inaccessible pockets of fire remain.
FIRECHEM Protein Foam Concentrate’s composition is based on a natural protein foaming agent and contains no harmful synthetic detergent or glycol ether.
This is available in two different types : FIRECHEM 3% and FIRECHEM 6 % .
FIRECHEM FFFP is a unique combination of a rapid fire knockdown quality of conventional film forming AFFF with a tough cohesive foam blanket based on protein base material, providing high level of post fire security and burn back resistance as a top quality fluoroprotein.
FIRECHEM FFFP’s formulation is based on advanced protein foam technology containing hydrolysed protein, fluorochemical surface active agent and preservatives to achieve the maximum synergetic effect.
AR-FFFP is multi-purpose natural protein based foam for use on a wide range of both hydrocarbon and polar solvent fuel fires . It contains special hydrophilic polymers producing a thick layer if applied on chemicals. It generates a fast flowing foam resistant against burn back with high insulating protection to heat and chemical destruction, if applied on any kind of fuel. It is suitable with all types of known equipment and is also compatible dry chemical powders.
FIRECHEM Foam concentrate can be used with high expansion equipment to combat three dimensional fires where total flooding is the objective such as paint booths , paper ware houses, airplane hangers and mines. The long lasting foam also helps to prevent re-igniting.
The large volume of foam produced blankets the area being protected and prevents air from reaching the fire. High Expansion Foam Concentrates are suitable with low, medium and high foam generating equipments.
FIRECHEM manufactures a wide range of Class A Foam Concentrates for use in a variety of firefighting applications. When proportioned with water, Class A foam concentrates change the water properties, reducing the surface tension allowing greater penetration into Class A fuels.
A mixture of foaming and wetting agents, our Class A foam concentrates also give water a superior foaming ability so it clings to surfaces with minimal run off, which speeds extinguishment and reduces water usage. In addition to wild land operations, FIRECHEM Class A foam is effective in fighting many deep – seated fires, such as paper, tires and wooden structures.
FIRECHEM has designed the Fluorine Free Foam to control and reduce the volume of harmful chemicals used in foam formulations. Fluorine Free Foam Concentrate is specially formulated to meet the growing demand for environmentally benign training foams. It is completely biodegradable and is available in three different types.
The FIRECHEM Fluorine Free Foam is totally free of Fluoro – Organic compounds. Fluorine free foams act as a physical barrier from a combination of surfactants and natural polymers extracted from living organisms.
This biodegradable and environment friendly synthetic foam formulations are manufactured for use in live fire training. It is suitable to use with both fresh and salt water. It is functional in any proportioning and generating equipment. The expansion and drainage characteristics are similar to AFFF 3% and low in toxicity; it can be used in sewage treatment plants.
Bladder Tanks are one component in a balance pressure foam proportioning system. It requires no external power other than water pressure to ensure correct operation. Both vertical and horizontal bladder tanks are designed and constructed in accordance with the latest revisions to ASME code.
Proportioning is the introduction of foam concentrate into a flowing water stream to produce a foam solution. These systems provide a dependable and cost-effective foam fire protection for a variety of flammable /combustible hazard areas and because water is the primary operating medium, they are easy to operate and maintain.
Balanced Pressure Proportioning System when coupled with FIRECHEM Aqueous Film Forming Foam (AFFF ) or Alcohol Type Concentrate (ATC ) is a system specifically designed for the protection of flammable liquid hazard.
FIRECHEM Foam Chamber is designed to introduce expanded foam directly onto the surface of a flammable or combustible liquid for fire extinguishment and /or vapour suppression. It increases the effectiveness of the foam blanket, resulting in more efficient operation and greater extinguishing capabilities.
Classified as Type ll discharge device in accordance with NFPA Standard 11, foam chambers deliver low expansion foam directly onto the fuel surface with a minimum foam submergence and fuel agitation. Foam chambers have the added advantage of directing all their flow directly onto the surface regardless of weather conditions. Foam chambers have a long history of timely and safe control of numerous incidents.
Handline nozzles provide a wide range of flexible flow control options. Ideal for use with AR-AFFF, AFFF and Class A foam concentrates, our handline nozzles achieve superior foam expansion for quick knockdown and extinguishment.
Foam Generators (FCH *-250 are designed to expand foam solution into millions of tiny bubbles in which the foam solution is expanded in volume to a range of 200:1 to 450:1 approximately depending on the generator selected, solution flow rate, foam concentrate and the operating pressure.
The extinguishing mechanisms of FIRECHEM HiEx Foam Generator (FCH* -250) involve a combination of the following:
FLAME – O – GUARD – DC
A versatile Flame retardant solution for fire protection of curtains and other loose hung flammable fabrics. In order to apply Flame-O-Guard to a small piece of material to ensure it does not shrink and the dyes are water-fast and does not water mark.
In the event of fire, the water-borne Flame -O-Guard -C fire protection coating for electrical cables form an insulating layer which delays short-circuiting and prevents spread of flame, thus maintaining the supply of electricity for a prolonged period of time.
Application of these products not only ensure dust control as required by the mining and environmental laws but in doing so effectively, it may ensure higher productivity and economy of operations. More and more mining projects, powder houses, cement plants, steel plants etc are going in for these products as a total solution to dust problems.
Dispersants can be an effective oil spill response strategy. They are capable of quickly removing significant quantities of oil from the sea surface by transferring it into the water column where it is broken down by natural processes. Significant environmental and economic benefits can be achieved, particularly when other at-sea response techniques are limited by weather conditions or the availability of resources. This chemical is used to reduce offshore oil pollution. These chemicals contain surface active agents ( surfactants ) in a solvent base, which are absorbed at the oil/water interface and lower the inter facial tension.
Our water tender are specialised firefighting apparatus designed for transporting water from a water source to a fire scene. Water tenders are capable of drafting water from a stream, lake or hydrant.
Our 25 ton multipurpose tender comes with top end Tata, Ashok Leyland Taurus or MAN chassis.
These multipurpose tenders are equipped with 8000-10000 litre water tank, and 500-3000 litre foam tank.
Our foam tenders carry the apparatus used to mix foam concentrate with water to make the foam solution and then pump and mix air to solution in order to make foam. It is used to transport and apply the same.
These engines are specifically designed to carry dry chemical (N2) fire fighting equipments. They can be optionally fitted with water tank, and pump system.
Our emergency rescue tenders are equipped with specialised tools to mitigate and rescue people in the event of a disaster. They come pre-fitted with high-capacity generator, flood light, light mast and hydraulic crane and can be used to carry other emergency rescue equipments.
Our water cannons are capable of shooting a large volume of water in a high-velocity stream, over dozens of meters. They are used in firefighting, large vehicle washing and riot control.
These mechanical devices are used to provide temporary access for people or equipment to inaccessible areas, usually at height. Other than rescuing persons from high buildings, it also helps in high level application of water or foam at a fire, general lifting, floodlighting, bridging, and scene surveillance.
