Steel Pipes #573849

We are a prominent Supplier of Stainless Steel Pipes & Tubes, which find application in various industries such as pharmaceuticals, food industry, chemical industry and many others. Stainless Steel Pipes & Tubes offered by us are available in varied lengths and diameters to fulfill the clients requirements. Our Stainless Steel Pipes & Tubes are corrosion resistant and have longer life. Range

• Seamless
• Welded
• ERW
• EFW

Salient Features

• High performance
• Corrosion resistant
• Anti-abrasive
• Durable

Stainless Steel Pipe and TubingStainless steels are iron-based alloys usually containing at least 11.5% chromium. Other elements, nickeI being the most Important, may be added in combination with chromium to obtain special properties. Stainless steels are highly resistant to corrosive attack and to oxidation at high temperatures. In general, resistance to corrosion and oxidation increases progressively, though not proportionately, with the increase in chromium content. Stainless Steel Pipe and Tubing are Used for a Variety of Reasons

• to resist corrosion and oxidation
• to resist high temperatures
• for cleanliness and low maintenance costs
• to maintain the purity of materials which come In contact with stainless

The inherent characteristics of stainless steel permit the design of thin wall piping systems without fear of early failure due to corrosion. The use of fusion welding to join such piping eliminates the need for threading. Type 304 stainless is the most widely used analysis for general corrosive resistant tubing and pipe applications. It is used in chemical plants, refineries, paper mills, and food processing industries. Type 304 has a maximum carbon content of .08%. It is not recommended for use in the temperature range between 800F and 1650F due to carbide precipitation at the grain boundaries which can result in inter-granular corrosion and early failure under certain conditions. Type 304L is the same as 304 except that a .03% maximum carbon content is maintained which precludes carbon precipitation and permits the use of this analysis in welded assemblies under more severe corrosive conditions. Type 318 is much more resistant to pitting than other chromium nickel alloys due to the addition of 2% to 3% molybdenum. It is particularly valuable wherever acids, brines, sulphur water, seawater or halogen salts are encountered. Type 316 is widely used in the sulphite paper industry and for manufacturing chemical plant apparatus, photographic equipment, and plastics. Type 316L, like 304L, is held to a maximum carbon content of .03%. This permits its use in welded assemblies without the need of final heat treatment. It is used extensively for pipe assemblies with welded fitting. Other Fields Where Stainless Steel Pipe and Tubing are Used Are :

• Aviation
• Electronics
• Automotive
• Marine
• Air conditioning andheating
• Medical
• Architectural
• Textiles

Specifications

• ASTM A-312/ASME SA-312 Welded Stainless Pipe
• ASTM A-358/ASME SA-358

ScopePipe intended for high temperature and general corrosive service as in A-312, plus electric fusion welded pipe as in A-358 and intended for high temperature and general corrosive service or both. General RequirementsConforming to the above specifications plus applicable parts us ASTM A-530. RangeASTM A-312 pipe is more commonly found from 1/8" IPS to and including 24 IPS in standard schedules 5, 10, 20, and 40. On special applications, sizes can be produced to 60 IPS through schedule 80 walls by certain mills. ASTM A-358 is usually produced in sizes 8 IPS and larger and where filler metal is added to the weld. This specification covers five classes of pipe and is usually determined by the end application and needs of the pipe. ASTM A-312 pipe is manufactured by two different processes. Pipe through 6 IPS is manufactured by the continuous welding process and is very similar to welded tubing. Coils of flat roll strips are fed into sizing rolls and welded. Material is then annealed (usually in an open air furnace), straightened, cut, pickled, tested, and inspected. In full finished pipe, material is cold worked after welding. This can be done by rolling, forging, or drawing the weld bead; but primarily the weld is rolled. Pipe 8 IPS and larger is manufactured by the batch method or process. Unlike the continuous welding method, material made by this batch method is made in single lengths. Plates, cut to length and width, are formed from flat into tubular shape by a press and welded. Material is then annealed, sized, and straightened, ends trimmed or cut to specific smaller lengths, pickled, and inspected. AS-Welded GradeAS-Welded pipe and tubing is straight-seam welded using ASME qualified automatic gas tungsten-arc procedure and can be supplied in a wide range of diameters and wall thicknesses from any of the weld able corrosion resistant alloys. Normally furnished with square cut ends, pipe with beveled, belied, or roil grooved ends can be provided. Spot radiography or 100% radiography of welded seams can also be performed. Company pickles and passivates its pipe and tubing to maintain corrosion resistance and to prevent surface discoloration from free iron oxidation. AS-welded pipe and tubing is commonly used in pulp and paper mills, food processing plants, and other industries where corrosion resistance is essential ASTM A 213 (ASME SA-213 is Identical)This specification includes minimum wall thickness seamless austenitic stainless steel tubing intended for high temperature usage such as boilers, super heaters and heat exchanger tubes, Production is generally limited to tubing A inside diameter to 5 outside diameter and .015 to , 500 inclusive in wall thickness. All material is to be furnished in the heat treated condition. ASTM A 249 (ASME SA-249 is Generally Identical)This specification covers welded austenitic stainless steel tubing intended for high temperature usage such as boilers, super heaters, heat exchangers, or condenser tubes. Production is generally limited to tubing 1/8" inside diameter through 5 outside diameter and .01 5 to .320 inclusive in wall thickness. All material is to be furnished in the heat treated condition. The Principal Manufacturing Procedures Specified Under a 249 Are :

• Automatic welding process with no addition of filler metal.
• Hydrostatic or non-destructive electric test of each tube.
• Tensile, flattening, flange, reverse bend and hardness tests required each lot.

ASTMA 269This specification covers seamless and welded austenitic stainless steel tubing intended for low or high temperature and general corrosive service. Production is generally limited to tubing 1/4 inside diameter and larger and .020 in nominal wall thickness and heaver. All material is to be furnished in the heat treated condition. Mechanical requirements are the same as listed under A 249. ASTM A 358 (ASME SA -358 is Generally Identical With Some Additional Requirements)This specification covers stainless steel pipe intended for high temperature and general corrosive service. Production is generally limited to diameters and schedule wall thicknesses of 8 and larger as shown in ANSI B36.10 and ANSI B36.19. Pipe is normally welded with filler metal (except the root pass on Class 4) and can be specified as :

• Single or double welded
• 100% spot or no radiography
• Heat treated after welding

The Principal Manufacturing Procedures Specified Under a 358 Are :

• Hydrostatic testing of each length (unless waived
• Transverse guided-bend tests and transverse tension tests per lot.

ASTM A 376 (ASME SA-376) is Generally Identical This specification covers seamless austenitic stainless steel pipe intended for high temperature service. Among the grades covered are five H grades and two nitrogen grades that are specifically intended for high temperature service. All material is furnished in the heat treated condition unless waived and specifically marked HT-O. Hydrostatic tests are required for each length of pipe. Tension and flattening tests are required per lot.

We are widely reckoned as one of the most trusted Manufacturers, Exporters and Suppliers of high quality Alloy Steel Pipes & Tubes. Alloy Steel contains substantial quantities of elements other than carbon such as nickel, chromium, silicon, manganese, tungsten, molybdenum, vanadium and limited amounts of other commonly accepted elements such as manganese, sulfur, silicon, and phosphorous. Addition of such alloying elements is usually to increase hardness, strength or chemical resistance. Alloy Steel Pipes & Tubes, offered by us, have exceptional performance properties. These are generally developed for energy-related applications involving oil and gas drilling and are subjected to stresses in machine parts. Alloy Steel Pipes & Tubes are also used in daily life, catering to the domestic, professional or industrial needs. In recent years, the demand for alloy steel tubing has been increasing along with the economic growth. In the process of heating like boiler/ chemical industries / paper, if the temperature exceeds 450 C and within 550 C, then boiler quality alloy steel can be efficiently used for headers, risers, main steam lines etc. ASME specifies a set of alloy steel pipe specifications which can be welded. (Welding rod specification is: E.8018.) It can be effectively used for pipe welding root run can be TIG welded using alloy steel TIG wire. Standard pipe schedules are available like SCH 20, SCH 40 etc. 60.3 mm outer diameter x 3.63 mm thick pipe outer diameter is used in general practice. Such pipes have a negative tolerance which will be considered at the stage of designing [negative tolerance means variation in thickness up to a maximum of 12.5% to be checked from ASME SEC viii DIV-1] outer diameter ranges from 25 mm to 400 mm & thickness range from 2.53 mm to 25 mm. Application Usage :Alloy steel pipes are known to deliver exceptional performance and are generally developed for meeting the demands of :

• Energy-related applications that involve oil and gas drilling
• Catering to domestic or industrial needs
• In conveyance of fluids intended for critical high temperatures
• In general corrosion service applications
• In heat transfer process equipment like boilers, heat exchangers
• In general engineering and process instrumentation applications

We are offering Carbon Steel Pipes. we are a top notch manufacturer and exporter of carbon steel pipes, which are available in different dimensions and lengths to fulfill the needs of various industries. these carbon steel pipes are appreciated for their high performance and superior quality in both domestic as well as international market.range seamless welded erwefwspecialty leak proof durable corrosion resistant prime quality.

We offer the clients with a wide range of Alloy Steel Pipes that is well-acclaimed among the clients for its superior performance. These alloy steel pipes can be accessed in different dimensions as per the requirement. We are counted as one of the leading manufacturers and exporters of alloy steel pipes in india. Range seamless welded erwefwfeatures durable optimum quality high performance corrosion resistant anti-abrasive.