flowtech fluid systems

Dwarakanagar, Visakhapatnam, Andhra Pradesh

These valves are manufactured as per IS: 9890/EN ISO 17292/BS 5351 specifications
for wide spread usage in refineries, fertilizers and petro chemical industries. These
are single piece/ three piece design, full bore/reduced bore. All compliance as well
as application design and testing standards are maintained for smooth functioning
of these valves.

A steam trap is an automatic device to trap or hold steam until it has condensed and
to allow condensate and air to pass as soon as they accumulate. 20-26% of steam
leaving a boiler lost via leaking conventional traps
With best steam trap available in the market and proactive steam trap maintenance
programme can reduce loss to less than 1%.

> Suction Diffuser General Description
Installed at the inlet of the pump.
Serves as a filter to remove suspended debris.
Act as a flow straightener and guides pumping media at the inlet of impeller.
Stabilizes flow at inlet of the pump.
Cast Iron body for ANSI class 125 and ductile iron for ANSI class 250.
Flanges as per ANSI standard / Customer requirement.
Acts as an elbow.
>>>Triple Duty Valve General Description
Installed at the discharge side of pump systems.
Spring-loaded disc prevents valve chatter.
Balancing valve/ Priming with by-pass function.
Inline or 90 flow arrangement is possible.
Cast Iron body for ANSI class 125 and ductile iron for ANSI class 250.
Flanges as per ANSI standard / Customer requirement.
Throttling operation.

These valves are widely used as for Naptha and Naptha derivatives in oil refineries.
With a flanged end connection, these valves are designed with API 600 standards. Its
rigid and sturdy design along with low pressure across the valve make it a very
formidable model in the entire product line.

These valves are widely used for Naptha and Naptha derivatives in oil refineries.
With a flanged end connection, these valves are designed with BS1873 standards. Its
rigid and sturdy design along with low pressure across the valve make it a very
formidable model in the entire product line.

These valves are very useful in preventing back flow of water to the pump. These
valves have minimum head loss and can be very competitive in terms of long service
life. These valves are very useful in waterworks pipelines to reduce hammer effect.
Non slam and quick closing characteristics have made this product a very
demandable one across markets.