Write a Review
Our Products
We offer a complete product range of RUNOUT CHECKING GAUGE, Ring Gauge, Dial Snap Gauge, Dial Bore Gauge and Digital Height Gauge
| Runout Checking Gauge reject measuring errors characteristic in conventional designs of concentricity gages. This unit is capable of measuring the run-out on tubular componets below. 0004" (1 micron) and can ideally be used in the cutting tool, punching, semiconductor, automotive and aerospace manufacturing. The special end stopper has a ball shape so that only one point of the stopper touches the center of the componetnt. The signle driving roller allows very slow rotation of the component, which is particularly current for checking channeled cutting tools such as end grinders, step tools and drills. Concentricity Gauge represents a fully new method to concentricity gaging and provides guaranteed development in accuracy and efficiency. This quality inspection device is available in 3 point of : Point 1 As a stand-alone unit for comparators and contour projectors, Point 2 surface plate with precision dial indicator and articulated arm, Point 3 surface plate with a high-accuracy laser scanner to measure distance and concentricity. |
| Code | Range Dia. (mm) | Measuring Length (mm) |
|---|---|---|
| 500-100 | 50 | 100 |
FEATURES
| For zero setting of inside micrometers, three points internal micrometers and bore gauges.Difference between the nominal size and the size marked on the setting ring when supplied. Cylindricity: 1m for 3-100 mm diameter.2 for 100-250 mm diameter.2.5 for 250-300 mm diameter. |
| Suitable for measuring mass production parts.Travel of moving anvil is 3 mm.Top Generic. |
| Code | Range (mm) |
|---|---|
| 608-001-A | 0-25 |
| 608-002-A | 25-50 |
| 608-003-A | 50-100 |
| 608-004-A | 100-150 |
| 608-005-A | 150-200 |
| 608-006-B | 0-40 |
| 608-007-B | 40-90 |
| Code | Range (mm) |
|---|---|
| 608-008-B | 90-140 |
| 608-009-B | 140-190 |
| 608-010-C | 0-40 |
| 608-011-C | 40-90 |
| 608-012-C | 90-140 |
| 608-013-C | 140-190 |
| The Measuring anvil made from ceramic.Applicable for 0.01/0.001 mm graduation dial/digital indicator. |
| Both the up and bottom of the base are datum surfaces.The slider has two jaws on its left and right side.The jaw on the slider's left the bottom measuring face.The jaw on the slider's right the up measuring face.In case the review surface plate is unavailable, upside of the base can be used as review surface plate.The range of application can be extended with various parts.1.5V battery. |
| Code | Range (mm) | L.C. (mm) | Accuracy (mm) |
|---|---|---|---|
| 400-300 | 0-300 | 0.01 | 0.04 |
| 400-600 | 0-600 | 0.01 | 0.04 |
| Measuring System fitted with incremental optical scale.Battery powered for longer operation autonomy without encumbering cables.Automatic processing of 1D and 2D measurements.Extensive statistical evaluations with automatic storage of the detected values.Possibility to set an unlimited number of reference points on the workpiece.Automatic temperature compensation. |
| Code | Range (mm) | Resolution (mm) | Repeatability (mm) |
|---|---|---|---|
| 404-600 | 0-600 | 0.001 | 0.002 |
| This instrument is ideal for a mass production set up or serial parts where a number of dimensions of a part have to be checked in less than a minute.Depending on the complexity and availability master setting.To check in your setting made yourself any fixture like diameter run out, between centers run out. Total length, step length, step diameter.This instrument offered with or without dial indicator, probe and display unit also possibility computer connectivity.50 kg maximum mass of component.100 to 900 mm component length.Bech length from 320 to 1400 mm.Typical Parts Can be inspect out are: Crankshafts, Camshafts, Gear Shafts, Rotors, Axle Shafts etc. |
| High Accuracy hard steel contact points.Contact force is independent of the user.Zero reference point remains accurate even after many hours of use or extreme swings in temperature. |
| Code | Range | L.C. | Accuracy |
|---|---|---|---|
| 313-001 | 1mm | 0.001mm | 0.006 mm |
| Three-point bore gauge with head for quick and easy and accurate measurements of internal measures such as (blind) bores.Easy single handed operation use.Available as single instruments and set, with setting ring(s) and extension.Measuring head range 6-200 mm, measuring depth (opence) 0-270 mm, read-out depends on the type of digital indicator or measuring probe.Tungsten carbide measuring faces instrument repeatability 0.003 mm and measuring head accuracy 0.003mm. |
| Code | Range (mm) | Accuracy (mm) |
|---|---|---|
| 706-008 | 6-8 | 0.004 |
| 706-010 | 8-10 | 0.004 |
| 706-012 | 10-12 | 0.004 |
| 706-016 | 12-16 | 0.004 |
| 706-020 | 16-20 | 0.004 |
| 706-025 | 20-25 | 0.004 |
| 706-030 | 25-30 | 0.004 |
| 706-040 | 30-40 | 0.004 |
| 706-050 | 40-50 | 0.005 |
| 706-063 | 50-63 | 0.005 |
| 706-075 | 63-75 | 0.005 |
| 706-088 | 75-88 | 0.005 |
| 706-100 | 88-10 | 0.005 |
| 706-125 | 100-125 | 0.005 |
| 706-150 | 125-150 | 0.005 |
| 706-175 | 150-175 | 0.005 |
| 706-200 | 175-200 | 0.005 |
| 706-225 | 200-225 | 0.007 |
| 706-250 | 225-250 | 0.007 |
| 706-275 | 250-275 | 0.007 |
| Both up and bottom of the base are datum surfaces.TThe slider has two jaws on its left and right side.Incase the review surface plate is unavaible upside of the base can be used as review surface plate.Coarse/fine feed adjustment.Data Output |
| Code | Range (mm) | L.C. (mm) | Accuracy (mm) |
|---|---|---|---|
| 402-300 | 0-300 | 0.01 | 0.04 |
| 402-600 | 0-600 | 0.01 | 0.04 |
Mayank Lunagariya (Fork Measuring Company)
Vavdi Sr No. 17, Plot No 55B, Rani Industrial Estate Gondal Road, Rajkot-360002 (Gujarat- India)
Share us via
