Post Buy Requirement
FW
Kolar, Karnataka, India
Add Review

Our Products

  1. Storage Silo 6 Products available
  2. Food Grains & Nut Processing Machine 11 Products available
  3. Filters & Filtration Systems 4 Products available
  4. Milling Machines 5 Products available
  5. Filters 3 Products available
  6. Grain Processing Machine 3 Products available
  7. Conveyors 3 Products available
  8. Food Processing Machines & Plants 3 Products available
  9. Others 44 Products available

Other Products / Services #5341576

Used Transformer Oil

  • Breakdown Voltage 15kV
  • Gas content 10
All high capacity transformers in use today have to cope with voltages in excess of 400 kV. Therefore it becomes imperative to maintain optimal insulation properties of the transformer oils by rigid control over moisture, dissolved gases, particulative contamination and acidity. Transformer oil deteriorates with time and the decay begins the moment the transformer oil is shipped from manufacturer's factory. High temperatures, the presence of oxygen and water, the catalytic action of the materials within the transformer, all combine to result in oxidation and cracking of the transformer oil. The by-products of this oxidative process are acidic in nature which results in an ever increasing rate of deterioration of the transformer and its oil.
View Complete Details

Lightweight Product Sorter

  • Channels 128 No’s
  • *Capacity( Input) Up to 1TPH
  • Final Rejects Removal of discoloured Products: Rot, Skin, Brown, Yellow, Burn Etc.
  • Foreign body & contamination: Insects, wood, stone, plastic, leaves, shell etc. Machine Dimension ( W x D x H ) in mm
  • 2480 x 2160 x 1970 Nett weight in Kgs

Multi - Chromatic Electronic Sorter for removal of colour defects and contaminants


The SNAPSHOTMCA Range uses a rapid sequence of different coloured lights to obtain more than color information from the product. Often, even very similar colours can be differentiated. The infra-red capability improves detection of foreign bodies. The camera information is processed by an ultra-fast digital signal processor, and commands are sent to one or more ejectors to remove the unwanted item efficiently.


The MCA is specifically configured for efficient sorting of difficult to handle, lightweight products such as Semolina or sooji, green herbs or flakes, Dehydrated products. After being spread on a vibratory feeder, the product accelerates down a chute and is inspected by the 2048 pixel line-scan camera. Defects and contaminants are removed by short puffs of air from ejectors built into the feed system. The unique shape of the chute and configuration of ejectors ensure very high efficiency of defect removal and low wastage of good product.


Application:

Dehydrated Herbs, Chives, Coarse Powders, Semolina (Sooji) Potato Flakes, Dry & Frozen Foods, Breakfast Cereals, Soya Granules, Chilli Flakes, Dehydrated Onions, Psyllium Husk, Sugar & Other Light Weight Products


Benefits :

Natural materials contain impurities and less-than-perfect product. By removing discolouration and contamination, the quality and value of the finished product are increased, or lower grade raw material can be used. The customer will be rewarded with the consistent quality product. Also, food safety is enhanced by ensuring that foreign bodies and contamination are removed before it reaches the consumer. Added value all round.


Features :

More than Color



  • Optical lighting in four bands from visible to infrared

  • Rapid LED lighting

  • High-resolution cameras from 0.3 mm

  • Flexibility Optional mono-chromatic Fluorescent lighting to suit product


Matching capabilities with budgets



  • Compact Footprint

  • Independent vibrator

  • Food grade Stainless Steel construction


Precise rejection



  • 128 fast ejectors.

  • Minimum good product removal


Fit and forget



  • Easy setup with large touchscreen

  • Facility to store and recall several programmed modes for multiple products

  • Auto-calibration and self-cleaning

  • Remote maintenance through modem connection

View Complete Details

Post Harvesting Machine

Fowler Westrup manufactures a range of world-class processing machinery for Post-harvest agro processing machines in collaboration with WESTRUP A/S, Denmark and OLIVER MANUFACTURING COMPANY INC. USA. Versatile and proven around the world, Fowler Westrup process machinery is backed by a nationwide sales and service network.


Fowler Westrup process machinery is ideally suited for the processing, handling, sorting & storage of seeds, spices, grains, tea, coffee, pulses, all varietiesofRicei, edible oil & paddy. The company also provides turn-key solutions to all processing needs.

We offer free sample testing on our imported laboratory machines for establishing required cleaning and grading procedure and also for selection of equipment. Fowler Westrups Solutions are earmarked with characteristic efficiency, quality and reliability that have become the cornerstone of the products having led to continued association with business houses that we have served in India and Overseas markets. Its focus has always been to bring to customers the best of the solutions & technologies.

View Complete Details

Drum Pre Cleaner

The Fowler Westrup Drum Pre-Cleaner is simple drum type rotating machine used for primary course cleaning at intake section of processing plant or silos in order to relieve the following machines & material handling equipment. The drum pre-cleaner separates coarse impurities such as paper, wood pieces, leaves, cobs, stones and long sticks etc.


Applications
Seeds:Soya, Ground Nuts, Maize & more.

Grains:Paddy, Wheat, Maize, Pulses & more.


Salient Features

  • Steel construction

  • Enclosed housing with inspection cover as well as assembly or servicing cover

  • Variable drum perfections based on customer requirements

  • Guide spiral inside the drum to convey the material to the outlet end

  • Scraper cleaning

  • Spout dust aspiration

  • Equipped with inlet spout and inlet channel

 

DESCRIPTION

UQM

MACHINE MODEL

DP 630

DP 950

Drum dimension

mm

Ø 630 x 780

Ø 950 x 1080

Drum area

sq. m

1.54

3.2

Motor Power

HP (KW)

0.5 (0.37)

0.75 (0.55)

Overall dimensions

mm

1530 x 833 x 1117

1989 x 1200 x 1440

Capacity 
(on wheat basis)

Ton/Hr

100

200

 
 
View Complete Details

Mono Chromatic Rice Sorter

The SNAPSHOTsorter is an intelligent precise rice sorter which uses a robust 2048 pixel high-speed line scan CCD camera combined with an image processor, fully trainable to suit needs through a refined color training process for flawless elimination of unwanted material.


The product is loaded through the top in feed hoppers and then passes through vibrators which send an even stream of the product down the plain chutes monitored by cameras which send data in real time to the processor which compares the product with the color trained template and rejects the unwanted material by blowing them away through pneumatically controlled ejectors nozzles to reject bin and the accepted material passed on to the accept bin. The second set of grooved chutes does a second run of the reject and reclaims and remaining good material. The accept and reject are the best in the industry.


Features

  • Wide range models up to 10 chutes

  • High definition 6144-pixel color CCD camera image acquisition system

  • Snapshot processors for high precision sorting.

  • Fit & Forget operation

  • Precise rejection through high-speed serviceable ejectors

  • Easy setup through interactive touchscreen

  • Best rejected ratio

  • Simultaneous removal of chalky rice without a reduction in throughput.

  • 24x7 support

  • Excellent Service network across India

Model MCR-192 MCR-252 MCR-256 MCR-726
Channels 192 NO’S 252 No's 256 No's 380 No's
*Capacity( Input) Up to 2TPH Up to 4TPH Up to 5TPH Up to 7 TPH
Final Rejects Rice – Black, Tip Defects, Dark Orange, Light Orange, Pale Yellow, Paddy & Chalky etc.
Rice – Black, Tip Defects, Dark Orange, Light Orange, Pale Yellow, Paddy & Chalky etc.
Machine Dimension ( W x D x H ) in mm 1900 x 2880 x 2060 1900 x 2880 x 2060 1900 x 2880 x 2060 2655 x 2845 x 2060
Nett weight in Kgs 1500 1600 1600 2000
 

View Complete Details

Tri Chromatic Rice Sorter

The SNAPSHOT TCR series color sorter is an intelligent precise sorter which uses a robust 6144 pixel high speed color CCD camera combined with image processor, fully trainable to suit needs through a refined color training process for flaw less elimination of unwanted material.


The product is loaded through the top in feed hoppers and then passes through vibrators which send an even stream of the product down the plain chutes monitored by cameras.The cameras send data in real time to the processor which compares the product with the colour trained template and rejects the unwanted material by blowing them away through pneumatically controlled ejectors nozzles to reject bin.The accepted material passed on to the accept bin. The second set of grooved chutes does a second run of the reject and reclaims and remaining good material. The accepts and rejects are the best in the industry.


Features

  • Wide range models up to 10 chutes

  • High definition 6144 pixel color CCD camera image acquisition system

  • Very high resolution inspection (from 0.05mm onwards)

  • Long lasting and low power consuming LED lights

  • Snapshot processors for high precision sorting.

  • Fit & Forget operation

  • Precise rejection through high speed serviceable ejectors

  • Easy setup through interactive touchscreen

  • Best rejected ratio

  • Simultaneous removal of chalky rice without reduction in throughput.

  • 24x7 support

  • Excellent Service network across India

Model TCR 64 TCR 128 TCR 192 TCR 256 TCR 320 TCR 384 TCR 448 TCR 512 TCR 640
Channels 64 No's 128 No's 192 No's 256 No's 320 No's 384 No's 448 No's 512 No's 640 No's
*Capacity( Input) Up to 1TPH Up to 2TPH Up to 3TPH Up to 4TPH Up to 5 TPH Up to 6TPH Up to 7 TPH Up to 8 TPH Up to 10TPH
Machine Dimension ( W x D x H ) in mm 846x1607 x1953 1250x1607 x1953 1875x1607 x1953 1920x1607 x1953 2095x1540 x1845 2410x1540 x1845 2725x1540 x1845 3040x1540 x1845 3925x1540 x1925
Net weight in Kg's 350 400 500 600 970 1100 1200 1400 1600
 

View Complete Details

Tri Chromatic Dal Sorter

The SNAPSHOT TCR series color sorter is an intelligent precise sorter which uses a robust 6144-pixel high-speed color CCD camera combined with an image processor, fully trainable to suit needs through a refined color training process for flawless elimination of unwanted material.


The product is loaded through the top in feed hoppers and then passes through vibrators which send an even stream of the product down the plain chutes monitored by cameras.The cameras send data in real time to the processor which compares the product with the colour trained template and rejects the unwanted material by blowing them away through pneumatically controlled ejectors nozzles to reject bin.The accepted material passed on to the accept bin. The second set of grooved chutes does a second run of the reject and reclaims and remaining good material. The accepts and rejects are the best in the industry.


Features

  • Wide range models up to 10 chutes

  • High definition 6144-pixel color CCD camera image acquisition system

  • Very high-resolution inspection (from 0.05mm onwards)

  • Long lasting and low power consuming LED lights

  • Snapshot processors for high precision sorting.

  • Fit & Forget operation

  • Precise rejection through high-speed serviceable ejectors

  • Easy setup through interactive touchscreen

  • Best rejected ratio

  • Simultaneous removal of chalky rice without a reduction in throughput.

  • 24x7 support

  • Excellent Service network across India

Model TCR 64 TCR 128 TCR 192 TCR 256 TCR 320 TCR 384 TCR 448 TCR 512 TCR 640
Channels 64 No's 128 No's 192 No's 256 No's 320 No's 384 No's 448 No's 512 No's 640 No's
*Capacity (Input) Up to 1TPH Up to 2TPH Up to 3TPH Up to 4TPH Up to 5TPH Up to 6TPH Up to 7TPH Up to 8TPH Up to 10TPH
Machine Dimension (WxDxH) in mm 846x1607 x1953 1250x1607 x1953 1875x1607 x1953 1920x1607 x1953 2095x1540 x1845 2410x1540 x1845 2725x1540 x1845 3040x1540 x1845 3925x1540 x1925
Net weight in Kg's 350 400 500 600 970 1100 1200 1400 1600
 

View Complete Details

Galvanized Farm Silos

Our Farm Silos are ranging from 4.6 m capacity to 33 m capacity, This is more suitable for farmers to store their commodities like paddy, wheat, pulses, oilseeds, cereals etc.

Features of Farm Silo



  • Silos manufactured with galvanized steel S350GD of high elastic tolerance and with Z450 minimum coating equivalent to 450 g/m2 of zinc.

  • 8, 8 quality dichromate bolts in all of our product range.

  • Washers with neoprene to ensure a waterproof seal.

  • Galvanized reinforced exteriors, regardless of thickness, that provide excellent anti-corrosion qualities.

  • Hot dip galvanized leg support structure.

  • Our method of calculating thickness is more demanding than that established by European standard DIN 1055 05/87.

  • Stairs and platforms comply with European standard


View Complete Details

Pre Cleaner PC

PC-600 / -1000 / -1250 / -1500



  • The PC pre-cleaner is suitable for grading and calibration of all kinds of products.

  • In standard construction, the PC machines are delivered with the following features.

  • The PC-600 and PC-1000 is fitted with inlet with weightloaded valve.

  • The PC-1250 and PC-1500 is fitted with inlet with feed roll.

  • The screen system consists of one sieveboat with 1 scalping screen layer and 1 long grading screen layer; both with adjustable inclination of 40, 60, 80or 110.

  • Each screen layer consists of 2 screen parts and all screens are rubber ball cleaned.

  • The PC does not have an aspiration system.

  • The machine is complete with fixed speed drive and motor.

  • The machine is of steel construction with sieve boat of laminated wood; standard paint is green RAL6024.


 
PC-600 PC-1000 PC-1250 PC-1500
Motor, sieveboat 0.75 kW 0.75 kW 1.50 kW 1.50 kW
Screen size L=800 mm x W 600 mm 1000 mm 1250 mm 1500 mm
Screen area 1.92 m2 3.20 m2 4.00 m2 4.80 m2
Estimated capacity on wheat up to 10 t/h 20 t/h 25 t/h 30 t/h
 
View Complete Details

Brushing Machine

Fowler Westrup Brushing/polishing machine can be used as the first step in the fine cleaning process of flower, vegetable and grass seeds. Machine is suitable to remove hairs, ears and wings from seeds, threshing seeds out of pods or flowers, splitting twin seeds, polish seed etc.


Applications

Seed Industry:Flower seeds, Vegetable seeds, Grains, Grass seeds, Spices & more.


Edible oil industry:Removing cake from the shell of seeds.


Research institutes:Treating small lot of expensive seeds.


Advantages


  • Gentle processing

  • High capacity

  • Outstanding removal of skins

  • Compact design

  • trouble free cleaning

  • Cost effective


Special Features

  • Variable speed drive

  • Beaters (instead of brushes)

  • Outstanding removal of skins

  • End outlet with aspiration, built on fan, and cyclone.

Technical Specification

DESCRIPTION

UQM
Machine Model
LA-H HA-400 HA-600 HA-800
Length mm 1080 1680 1980 1980
width mm 700 625 1410 1585
Height mm 1385** 985 1835 2035
Mantle mm 400 800 1245 1245
No of brush Pcs 2 6 4 4
Net Weight kg 230 300 606 704
Capacity (on rye grass basis) TPH 0.2* 0.5 1 1.5
Power kW 1.55 3 5.5 7.5


View Complete Details

Rice Milling

Fowler Westrup manufactures a wide range of rice processing machines right from cleaners to husking & polishing, Opto electronic color sorters, Silo Storage systems and accessories to meet the requirements of the rice milling industry, apart from turnkey supply, installation and commissioning of rice mills in India and overseas.


Fowler Westrup which has pioneered world class cleaners at an affordable rate to the Indian Agricultural Processing industry has again brought in a world class product to change the Rice Milling scenario in the country with the collaboration of Japanese leaders M/s. Yamamoto Co. Ltd is bringing revolutionary product which will give the best yield with the lowest power consumption, thus contributing to the increase in margin for the miller. Fowler Westrups rice milling machineries are engineered to excellence to maximize yield of head rice, minimize product breakage and deliver reliable product quality. Fowler Westrups rice milling machinery is characterized by efficient power consumption and low maintenance costs, thereby reducing operating costs and maximizing profits for customers.


Following are some of the models which are readily available :




  • Destoner - CSP 502

  • Paddy Husker - YSA 100

  • Paddy Separator - SE 500

  • Abrasive Whitener - XPA 25

  • Abrasive Whitener - GPA 50

  • Friction polisher - XPF 50 and XPF 50 D

  • Grading Sifter - SF 301


View Complete Details

Paddy Husker YSA100

  • Dimensions (mm) (Standard specific) 2032
  • Length (mm) 1832
  • Width (mm) 2610
  • Height (mm) 10
  • Rubber roll (Inch) 5 to 6*
  • Input capacity (T/h) 1300
  • Net weight (kg) 7.5#
  • Power (Kw) 3 phase 415 v (head) 3.9#
  • Power (KW) 3 phase 415 V (aspirator)  

FEATURES



  • Pneumatic husking system

  • Optional input by feeder control system

  • High husking efficiency with minimal breakage

  • Provision for qualitative and quantitative

  • Separation control of mixture from paddy & brown rice

  • Easy operation & settings

View Complete Details

Paddy Separator SE500

  • Model SE 500
  • Dimensions (mm) (Standard specific)  
  • Length (mm) 2587
  • Width (mm) 1865
  • Height (mm) 1955
  • Input capacity (T/h) 5 to 8*
  • Net weight (kg) 1330
  • Power (Kw) 3 phase 415 v 2.2#
  • No of decks 20R + 20L

Features



  • Steady and superior performance

  • Adjustments during operation isnt necessary because of its constant and steady separation performance

  • Minimized installation space

  • Compact design and large capacity. Hence, installation space is less

  • Automatic stop device Machine automatically stops as soon as the bin becomes nearly empty

  • Dual inclination adjustment horizontal & vertical inclination

View Complete Details

Color Sorting Equipment

  • Machine dimension (W x D x H) in mm 1000 X 1600 X 1800
  • Input Capacity Up to 2 TPH
The sorter is an intelligent precise equipment which uses a robust 2048 pixel high speed line scan CCD Camera combined with image processor, fully trainable to suit needs through a colour training process for elimination of unwanted material.The product is loaded through top in-feed hoppers and then passes through vibrators which send an
even stream of the product down the plain chutes monitored by cameras.
View Complete Details

Modular Cleaners CC 1500

It excels at precision cleaning of all varieties of seed and grain as well as Pre-cleaning and sizing when very high efficiency standards are required. The machine is assembled with modular components to make a cleaner to suit very specific requirements.

The Great advantage of the modular system is that is also offers the capability of upgrading the machine according to future requirements. The feeding apparatus can be in construction with feed roll, with feed roll and straw band, with feed roll and one or two straw drums, with feeding augers and cleaning band, or with vibratory feeder. Pre-aspiration can be done in a channel with fixed or variable depth, in a chamber with standard air system or with air recirculation. Aspiration can also be done in a chamber with one, two or three waste augers.


Customized solutions for application like soya bean can be offered.

Technical DATA UOM CC 1500
Screen Length mm 1000
Screen Width mm 1500
Screen Width mm 1500
Screen Area Sq.mtr 36.00
Motor, FAN hp 15.00
Motor, Seiveboat hp 3.00
Motor, Feeding Module hp 0.75
Motor, Aspiration Module hp 0.50
Air Volume Cu.mtr/hr 13500
Cyclone Dia mm 1850
Net Weight kg 8500
Screen Width mm 1500
No. of Rubber Balls / Ball Frame Each 140
No. of Screens Per Machine Each 24
No. of Rubber Balls / Machine Each 3360
Length of Bottom Frame mm 4125
Width of Bottom Frameh mm 1985
Machine Height without Fan mm 5080
Capacity* (on Wheat Basis) TPH UP TO 250
View Complete Details

Pre Cleaner SAB

SAB-600 / -800 / -1000 / -1250 / -1500

The SAB pre-cleaner is first and foremost designed to master pre-cleaning jobs at modern intake plants





  • Furthermore it is also ideally suited to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput.

  • In standard construction, the SAB machines are delivered with the following features.

  • The machine is fitted with inlet with feed roll.

  • The aspiration chamber is fitted with one waste auger.

  • The screen system consists of one sieveboat with 1 short scalping screen layer (1 screen part) and 2 long grading/sand screen layers (2 screen parts).

  • The machine has an integral fan, fixed speed drive, and motors.

  • The machine is of steel construction with sieveboat of laminated wood.


  SAB-600 SAB-800 SAB-1000 SAB-1250 SAB-1500
Motor, fan 3.00 kW 3.00 kW 4.00 kW 4.00 kW 4.00 kW
Motor, sieveboat 1.10 kW 1.10 kW 1.50 kW 1.50 kW 1.50 kW
Screen size L=1000 mm x W 600 mm 800 mm 1000 mm 1250 mm 1500 mm
Screen area 3.00 m2 4.00 m2 5.00 m2 6.25 m2 7.50 m2
Estimated capacity on wheat 15 t/h 20 t/h 30 t/h 40 t/h 50 t/h
 
View Complete Details

Pre-Cleaner SAC

SAC-800 / -1000 / -1250 / -1500


The SAC pre-cleaner is first and foremost designed to master pre-cleaning jobs at modern intake plants




  • Furthermore it is also ideally suited to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput.

  • In standard construction, the SI machines are delivered with the following features.

  • The machine is fitted with feeding apparatus with feed roll and 550 mm straw drum.

  • The aspiration system consists of pre-aspiration and final aspiration.

  • The screen system consists of two parallel working sieveboats each with 1 scalping screen layer and 1 grading/sand screen layer.

  • Each screen layer consists of 2 screen parts.

  • All screens are rubber ball cleaned.

  • The machine has an integral fan, fixed speed drive, and motors.

  • The machine is of steel construction with sieveboats of laminated wood.


  SAC-800 SAC-1000 SAC-1250 SAC-1500
Motor, fan 3.00 kW 4.00 kW 4.00 kW 5.50 kW
Motor, sieveboat 1.10 kW 1.10 kW 1.50 kW 1.50 kW
Screen size L=1000 mm x W 800 mm 1000 mm 1250 mm 1500 mm
Screen area 5.60 m2 7.00 m2 8.75 m2 10.50 m2
Estimated capacity on wheat 20 t/h 30 t/h 40 t/h 50 t/h
Estimated fine cleaning capacity on wheat 3 t/h 4 t/h 6 t/h 7 t/h
View Complete Details

Pre-Cleaner SI

SI-50 /60 / -70


The SI pre-cleaner is first and foremost designed to master pre-cleaning jobs at modern intake plants




  • Furthermore it is also ideally suited to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput.

  • In standard construction, the SI machines are delivered with the following features.

  • The machine is fitted with feeding apparatus with feed roll and 550 mm straw drum.

  • The aspiration system consists of pre-aspiration and final aspiration.

  • The screen system consists of two parallel working sieveboats each with 1 scalping screen layer and 1 grading/sand screen layer.

  • Each screen layer consists of 2 screen parts.

  • All screens are rubber ball cleaned.

  • The machine has an integral fan, fixed speed drive, and motors.

  • The machine is of steel construction with sieveboats of laminated wood.



 
SI-50 SI-60 SI-70
Motor, fan 5.50 kW 7.50 kW 7.50 kW
Motor, sieveboat 1.50 kW 2.20 kW 2.20 kW
Screen size L=1000 mm x W 1000 mm 1250 mm 1500 mm
Screen area 8.00 m2 10.00 m2 12.00 m2
Estimated capacity on wheat 50-55 t/h 60-65 t/h 70-80 t/h
 
View Complete Details

Fine-Cleaner GSU

GSU-600


The GSU fine cleaner is a small allround machine very well suited for fine cleaning of grain and hard seed as well as small amounts of flower and garden seed




  • Estimated capacity on wheat is up to 0.8 t/h.

  • In standard construction, the GSU machines are delivered with the following features.

  • The feeding apparatus is fitted with feed roll.

  • The aspiration system consists of pre-aspiration and final aspiration.

  • The screen system consists of one sieveboat with three screen layers with fixed screen inclination.

  • There is optional scalping or sand for the 1st and 2nd screen layers; the 3rd screen layer is always sand

  • Each screen layer consists of 1 screen part and all screens are rubber ball cleaned.

  • The GSU has a screen size of 1000 x 600 mm and a total screen area of 1.8 m2 .

  • The machine has an integral fan with 3.0 kW motor and a 1.1 kW motor for the sieveboat.

  • The machine is of steel construction with sieveboat of laminated wood


  GSU-600
Air quantity for standard fan at 100 mm WG after the machine 5,000 m3/h
Motor, standard fan 3 kW
Motor, speed drive 1.1 kW
Number of screens incl. ball frames 3 pcs
Number of balls in each ball frame 56 pcs
Screen size L=1000 mm x W 600 mm
Screen area 1.8 m2
Capacity * up to approx. 0.8 t/h
 
View Complete Details

Fine Cleaner UB

UB-600 / -1000 / -1250 / -1500


The UB Fine Cleaner is especially used for fine cleaning and grading of light and heavy seeds, cereals, and granulated products




  • The machine can also be equipped to suit a variety of special jobs and purposes.

  • In standard construction, the UB machines are delivered with the following features.

  • The machine is fitted with inlet with feed roll with variable speed from eccentric shaft.

  • The aspiration system consists of pre-aspiration chamber fitted with one waste auger and final aspiration chamber with one auger.

  • The screen system consists of one sieveboat with 1 short scalping screen layer (1 screen part), 1 long scalping screen layer (3 screen parts), and 1 long sand screen layer (3 screen parts).

  • All screens are rubber ball cleaned.

  • The machine has an integral fan, fixed speed drive, and motors.

  • The machine is of steel construction with sieveboat of laminated wood.


 
UB-600 UB-1000 UB-1250 UB-1500
Motor, fan 3.00 kW 4.00 kW 4.00 kW 5.50 kW
Motor, sieveboat 1.10 kW 1.10 kW 1.50 kW 1.50 kW
Screen size L=800 mm x W 600 mm 1000 mm 1250 mm 1500 mm
Screen area 3.36 m2 5.60 m2 7.00 m2 8.40 m2
Estimated capacity on wheat 1.5 t/h 3.0 t/h 3.8 t/h 4.5 t/h
 
View Complete Details

Fine-Cleaner UB-4

UB-4


The Westrup UB/4 Fine Cleaner is especially used for fine cleaning and grading of light and heavy seeds, cereals, and granulated products. The machine can also be equipped to suit a variety of special jobs and purposes.


The machine is constructed of steel with sieveboat of laminated wood.


STANDARD CONSTRUCTION:




  • Inlet with feed roll with variable speed from eccentric shaft.

  • Pre-aspiration chamber with auger.

  • Sieveboat with 1 short scalping screen layer 4 and distribution on 2 long sand screen layers 6. All screens with rubber ball cleaning.

  • Final aspiration chamber with auger.

  • Built-on fan, fixed speed drive, and motors.



 
UB-600/4 UB-1000/4 UB-1250/4 UB-1500/4
Motor, fan 3.00 kW 4.00 kW 4.00 kW 5.50 kW
Motor, sieveboat 1.10 kW 1.10 kW 1.50 kW 1.50 kW
Screen size L=800 mm x W 600 mm 1000 mm 1250 mm 1500 mm
Screen area 3.36 m2 5.60 m2 7.00 m2 8.40 m2
Estimated capacity on wheat 1.5 t/h 3.0 t/h 3.8 t/h 4.5 t/h
 
View Complete Details

Fine-Cleaner FAU

FAU-1000 / -1250 / -1500


The FAU fine cleaner is first and foremost designed to be the main machine in seed and grain cleaning plants




  • In standard construction, the FAU machines are delivered with the following features.

  • The machine is fitted with feeding apparatus and feed roll with variable speed drive.

  • The aspiration chamber is fitted with waste augers.

  • The screen system consists of two sieveboats with multi-flow variable screen system and variable speed drive.

  • Each sieveboat contains 2 screen layers each consisting of 3 screen parts.

  • All screens are rubber ball cleaned.

  • The machine has an integral fan, speed drive, and motors.

  • The machine is of steel construction with sieveboats of laminated wood.



  FAU-1000 FAU-1250 FAU-1500
Motor, fan 5.50 kW 7.50 kW 7.50 kW
Motor, sieveboats 2.20 kW 2.20 kW 2.20 kW
Screen size L=800 mm x W 1000 mm 1250 mm 1500 mm
Screen area 9.60 m2 12.00 m2 14.40 m2
Estimated capacity on wheat 8 t/h 10 t/h 12 t/h
 
View Complete Details

MAXI CAP DS

The Fowler Oliver Maxi Cap Destoners extract heavy particles from a larger quantity of light material and in turn, purify and add value to your product.


The Maxi cap DS Specifically designed for our customers to fill the need for a heavier duty machine capable of handling larger, more demanding capacities. Crafted to be long-lasting and dependable load after load, this larger Maxi-Cap machine is still very accurate and features the same Oliver precise control that our customers fine so valuable.


The Destoner is designed to make a two-way division of a small volume of heavy material from a larger volume of light material. Fowler Olivers Maxi cap Destoners enhance the value of many different materials through the division of light and heavy particles. Heavy contaminants as well as purity grades can be achieved, resulting in improved quality of your product.

Technical DATA UOM 305 605 905 1205
Deck Size mm 920 x 1520 920 x 1520 2740 x 1520 3660 x 1520
Fan Motor kw 3.7 7.5 11.2 15.0
Deck Motor kw 0.75 1.1 1.1 1.1
Hydraulic Pump Kw 0.37 0.37 0.37 0.37
Length of M/c mm 2340 2340 2340 2340
Width of M/c mm 1370 2290 3200 4120
Height of M/c mm 2440 2440 2440 2440
Net Weight of M/c Kg 771 1451 2177 2857
Gross Weight of M/c Kg 907 1588 2267 2993

 

View Complete Details

Indented Cylinder-TR

TR-620 / -625 / -630 / -725 / -730 / -930


The TR indented cylinder is constructed to be part of a modular system, this means that a quantity of indented cylinders can be so arranged to satisfy all demands to capacities and plant lay-out.


It also means that capacities in existing plants can be increased at any time by adding one or more cylinders.


Estimated capacity on wheat is up to 5 t/h for TR-620, up to 6 t/h for TR-625, up to 7 t/h for TR-630, upto 7.5 t/h for TR-725 and up to 10 t/h for TR-730 and up to 12 t/h for TR-930.


In standard construction, the TR machines are delivered with the following features.


The cylinder can be fitted with agitator, agitator with auger, or outlet brake.


The exchangeable mantle is twoparted with the dimension:
600 x 1910 mm for TR-620
600 x 2410 mm for TR-625
600 x 2910 mm for TR-630
700 x 2410 mm for TR-725
700 x 2910 mm for TR-730
900 x 2910 mm for TR-930.


The position of the trough is infinitely adjustable.


The machine is fitted with safety access doors on left and right side of the mantle.


The machine is complete with fixed speed drive and 1.1 /1.5 / 2.2 / 3.

View Complete Details

Accessories Cyclone

CY-800 / -950 / -1200 / -1400 / -1600 / -1850

The CY cyclone is in standard construction furnished with air valve.

Type A
mm
B
mm
C
Ø mm
D
mm
E
mm
F
mm
G
mm
H
mm
I
Ø mm
K
Ø mm
L
mm
Q
m3/h
WG
mm
M
mm
800 2080 975 800 1230 750 100 200 400 349 200 100 3000 30 450
950 2350 1125 950 1375 800 125 250 450 399 200 175 4500 40 500
1200 2525 1425 1200 1450 950 125 300 450 549 200 175 7000 50 650
1400 2985 1645 1400 1835 1025 125 400 450 599 200 150 9000 60 720
1600 3495 1862 1600 2055 1240 200 400 550 649 200 240 12000 75 837
1850 4165 2144 1850 2425 1600 140 450 650 749 200 240 15000 65 970
 













View Complete Details

Handling Equipment Bucket Elevator

EL- 15 / - 25 / -27 / -29 / -35


The EL elevator is suited for transportation of cereals, seeds, granular products, and similar materials; also suitable for oleaginous seeds


In standard construction, the EL elevators are delivered with the following features.


Standard height is 4.0 m.


The elevator contains a number of leg sections plus a head and boot piece with pipe connections between these.


One of the leg sections is fitted with access for belt mounting.


The elevator head has motor drive bracket.


The elevator boot has adjustment device for belt tensioning and cleanout door on both sides.


There is furthermore a plexiglass window for visual inspection.


The elevator belt is oil resistant type l EP 500/4.


All model elevator has a plastic buckets.


The elevator is with free shaft pin for mounting of motor/gearmotor, excl. motor/gearmotor.


The elevator is of steel construction with belt rolls of hard-wearing material.

  EL-15 EL-25 EL-27 EL-29 EL-35
Max. height 15 m 20 m 25 m 30 m 30 m
Belt width 100 mm 140 mm 200 mm 250 mm 250 mm
Belt speed 2.00 m/s 2.00 m/s 1.25 m/s 0.75 m/s 2.00 m/s
 
View Complete Details

Hydraulic Oil Cleaning Machine

The lube oil filtration machine is used for purifying the various types of turbine and hydraulic oil used in the machines of the power plant viz Turbine, Generators etc.

This machine conditions Lube oil of grade ISO VG 46 & ISO VG 68 and enhance the parameters of water content from 2000 ppm to 5 ppm and separates (removes) the free water, sludge and carbon from Lube oil.

This machine mainly consists of two parts.

Centrifuge
Degassing and vacuum system
This lube oil filtration machine is used for purifying the hydraulic oil grade ISO VG - 46 used to clean the power packs.

For testing power packs fresh hydraulic oil is required in every cycle with particle cleanliness level as NAS 1638 class 5 ISO 4406 1411 and water content less than 50 ppm.

This machine consists of 3 stage filtration of 50, 5 and 1 micron filters with heating and degassing vacuum system.
View Complete Details

Pre Cleaner DP

The Fowler Westrup Drum Pre-Cleaner is simple drum type rotating machine used for primary coarse cleaning at intake section of processing plant or silos in order to relieve the following machines & material handling equipment.


The drum pre-cleaner separates coarse impurities such as paper, wood pieces, leaves, cobs, stone, long stick etc. The drum inside the cleaner is made of two halves - an inlet cylinder and a discharge cylinder - where two different perforations ensure optimum throughput capacity and separating efficiency.


The capacity depends on the nature of the material to be cleaned (moisture, impurities etc.) as well as the chosen perforation(s) of the drum.


DESCRIPTION

UQM

DP 630

DP 950

Drum dimension

mm

Ø 630 x 780

Ø 950 x 1080

Drum area

sq. m

1.54

3.20

Motor Power

HP(KW)

0.5 (0.37)

0.75 (0.55)

Overall dimensions

mm  

1200 x 840 x 1120

1980 x 1200 x 1440

Capacity

(on wheat basis)

Ton/Hr

100

200

 
View Complete Details

Automatic Discharge System

Features


High efficiency screen


With secondary screen mechanisms, it can decrease the mixture of paddy with discharged stone.


Automatic discharge system


Automatic discharge system with timer control can save operational trouble


Adjustable screen inclination


According to flow amount and material, screen angle can be adjusted


Model

CSP-502

CSP-800

CSP-1000

Dimensions (mm) (Standard specific)

 

 

 

Length (mm)

1193

1575

2070

Width (mm)

1132

1400

1132

Height (mm)

1750

2235

2092

Input Capacity (T/h)

5 to 6*

8*

10*

Net weight (kg)

225

400

425

Power (Kw) 3 phase 415 v

1.5#

2.2+1.1

3# + 3

View Complete Details

Colour Sorting Machine

  • Capacity Up to 1TPH, Up to 2TPH
  • Machine Dimension (WxDxH)in mm 846x1607 x1953
Wide range models up to 10 chutes
High definition 6144-pixel color CCD camera image acquisition system
Very high-resolution Inspection (from 0.05 mm onwards)
Long lasting and low power consuming LED lights
Wide range of applications
Product contact part in Stainless Steel (SS)
User-friendly interface Best Rejection Ratio with reverse resorting
High-speed serviceable ejectors
Longer machine life & lower operation cost
Effective dust extraction system
Chute heating system ( Optional)
View Complete Details

Transformer Evacuation System

Transformer Evacuation systems are classified based on the type of mounting of the system. Following are the types of mounting.

Skid (stationary) Mounted
Semi-Mobile type (Castor Wheel mounted)
Transformer Evacuation systems are further classified based on the flow ratecapacity of the system ranging from 10 CUB. MTRHR to 2500 CUB. MTRHR.
View Complete Details

Agricultural Processing Machine

Fowler Westrup manufactures a range of world-class processing machinery for Post-harvest agro processing machines in collaboration with WESTRUP AS, Denmark and OLIVER MANUFACTURING COMPANY INC. USA. Versatile and proven around the world, Fowler Westrup process machinery is backed by a nationwide sales and service network.
View Complete Details

Paddy Pre Cleaner

  • Screen size L 1000 mm x W
  • Screen area 3.00 m2
The SAB pre-cleaner is first and foremost designed to master pre-cleaning jobs at modern intake plants

Furthermore it is also ideally suited to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput.
In standard construction, the SAB machines are delivered with the following features.
The machine is fitted with inlet with feed roll.
The aspiration chamber is fitted with one waste auger.
The screen system consists of one sieveboat with 1 short scalping screen layer (1 screen part) and 2 long gradingsand screen layers (2 screen parts).
The machine has an integral fan, fixed speed drive, and motors.
The machine is of steel construction with sieveboat of laminated wood.
View Complete Details

Fine Cleaner

  • Screen size L 800 mm x W
  • Screen area 3.36 m2, 5.60 m2, 7.00 m2
The UB Fine Cleaner is especially used for fine cleaning and grading of light and heavy seeds, cereals, and granulated products

The machine can also be equipped to suit a variety of special jobs and purposes.
In standard construction, the UB machines are delivered with the following features.
The machine is fitted with inlet with feed roll with variable speed from eccentric shaft.
The aspiration system consists of pre-aspiration chamber fitted with one waste auger and final aspiration chamber with one auger.
The screen system consists of one sieveboat with 1 short scalping screen layer (1 screen part), 1 long scalping screen layer (3 screen parts), and 1 long sand screen layer (3 screen parts).
All screens are rubber ball cleaned.
The machine has an integral fan, fixed speed drive, and motors.
The machine is of steel construction with sieveboat of laminated wood.
View Complete Details

Material Handling Elevators

  • Max. height 15 m, 20 m, 25 m
  • Belt width 100 mm, 140 mm, 200 mm
The EL elevator is suited for transportation of cereals, seeds, granular products, and similar materials; also suitable for oleaginous seeds

In standard construction, the EL elevators are delivered with the following features.

Standard height is 4.0 m.

The elevator contains a number of leg sections plus a head and boot piece with pipe connections between these.

One of the leg sections is fitted with access for belt mounting.

The elevator head has motor drive bracket.

The elevator boot has adjustment device for belt tensioning and cleanout door on both sides.

There is furthermore a plexiglass window for visual inspection.

The elevator belt is oil resistant type l EP 5004.

All model elevator has a plastic buckets.

The elevator is with free shaft pin for mounting of motorgearmotor, excl. motorgearmotor.

The elevator is of steel construction with belt rolls of hard-wearing material.
View Complete Details

Spices Processing Machinery

  • *Capacity Up to 1TPH, Up to 2TPH
  • Machine Dimension (WxDxH)in mm 846x1607 x1953
Fowler Westrup manufactures a range of world-class processing machinery for Post-harvest agro processing machines in collaboration with WESTRUP AS, Denmark and OLIVER MANUFACTURING COMPANY INC. USA. Versatile and proven around the world, Fowler Westrup process machinery is backed by a nationwide sales and service network.
View Complete Details

Oil Filter Press

All high capacity transformers in use today have to cope with voltages in excess of 400kV. Therefore it becomes imperative to maintain optimal insulation properties of the transformer oils by rigid control over moisture, dissolved gases, particulate contamination and acidity.
View Complete Details

Transformer Oil Filtration Plant

All high capacity transformers in use today have to cope with voltages in excess of 400kV. Therefore it becomes imperative to maintain optimal insulation properties of the transformer oils by rigid control over moisture, dissolved gases, particulate contamination and acidity.
Transformer oils deteriorate with time and the decay begins the moment the transformer oil is shipped from Manufacturers factory. High temperatures, the presence of oxygen and water, the catalytic action of the materials within the transformer, all combine to result in oxidation and cracking of the transformer oil. The by-products of this oxidative process are acidic in nature, which results in an ever-increasing rate of deterioration of the transformer and its oil. This type of contaminated oil completely loses its insulating properties which will affect the life of the transformer in the long run. Hence the insulation properties of transformer oils should be maintained periodically by filtering this oil through our Nirmal filtration machines.
View Complete Details

Recycled Base Oil

It is a well known fact that different types and grades of oils like engine oil, lube oil, hydraulic oil, turbine oil etc. used by various sectors gets contaminated during the course of time due to different factors. As a standard practice in many organizations, these oils are discarded and replaced with new oil during regular periodic maintenance. If the carbon content present in these oils are removed by distillation process, then it is called as distilled lube oil (base oil). However such oils have a stinking odour and are brown in colour.

Fowler Westrup has designed an advanced machine that removes the odour from the distilled lube oil, apart from a drastic improvement in colour. This machine serves as an economical alternative to hydrogen treatmentclay processing plants and is extremely cost effective.
Processing the distilled lube oil through our regeneration system results in oil that is stable against oxidation over any measured timescale. This increase in shelf life is an added benefit compared to the existing clay polishing system. Furthermore the viscosity index is not degraded due to passing of oil in our regeneration system.
View Complete Details

Oil Centrifuging Machine

The lube oil filtration machine is used for purifying the various types of turbine and hydraulic oil used in the machines of the power plant viz Turbine, Generators etc.

This machine conditions Lube oil of grade ISO VG 46 & ISO VG 68 and enhance the parameters of water content from 2000 ppm to 5 ppm and separates (removes) the free water, sludge and carbon from Lube oil.

This machine mainly consists of two parts.

Centrifuge
Degassing and vacuum system
This lube oil filtration machine is used for purifying the hydraulic oil grade ISO VG - 46 used to clean the power packs.

For testing power packs fresh hydraulic oil is required in every cycle with particle cleanliness level as NAS 1638 class 5 ISO 4406 1411 and water content less than 50 ppm.

This machine consists of 3 stage filtration of 50, 5 and 1 micron filters with heating and degassing vacuum system
View Complete Details

Fine-Cleaner UB

UB-600 / -1000 / -1250 / -1500


The UB Fine Cleaner is especially used for fine cleaning and grading of light and heavy seeds, cereals, and granulated products




  • The machine can also be equipped to suit a variety of special jobs and purposes.

  • In standard construction, the UB machines are delivered with the following features.

  • The machine is fitted with inlet with feed roll with variable speed from eccentric shaft.

  • The aspiration system consists of pre-aspiration chamber fitted with one waste auger and final aspiration chamber with one auger.

  • The screen system consists of one sieveboat with 1 short scalping screen layer (1 screen part), 1 long scalping screen layer (3 screen parts), and 1 long sand screen layer (3 screen parts).

  • All screens are rubber ball cleaned.

  • The machine has an integral fan, fixed speed drive, and motors.

  • The machine is of steel construction with


 
UB-600 UB-1000 UB-1250 UB-1500
Motor, fan 3.00 kW 4.00 kW 4.00 kW 5.50 kW
Motor, sieveboat 1.10 kW 1.10 kW 1.50 kW 1.50 kW
Screen size L=800 mm x W 600 mm 1000 mm 1250 mm 1500 mm
Screen area 3.36 m2 5.60 m2 7.00 m2 8.40 m2
Estimated capacity on wheat 1.5 t/h 3.0 t/h 3.8 t/h 4.5 t/h
View Complete Details

Modular Cleaners CC

It excels at precision cleaning of all varieties of seed and grain as well as Pre-cleaning and sizing when very high efficiency standards are required. The machine is assembled with modular components to make a cleaner to suit very specific requirements.

The Great advantage of the modular system is that is also offers the capability of upgrading the machine according to future requirements. The feeding apparatus can be in construction with feed roll, with feed roll and straw band, with feed roll and one or two straw drums, with feeding augers and cleaning band, or with vibratory feeder. Pre-aspiration can be done in a channel with fixed or variable depth, in a chamber with standard air system or with air recirculation. Aspiration can also be done in a chamber with one, two or three waste augers.


Customized solutions for application like soya bean can be offered.v

Technical DATA UOM CC 1500
Screen Length mm 1000
Screen Width mm 1500
Screen Width mm 1500
Screen Area Sq.mtr 36.00
Motor, FAN hp 15.00
Motor, Seiveboat hp 3.00
Motor, Feeding Module hp 0.75
Motor, Aspiration Module hp 0.50
Air Volume Cu.mtr/hr 13500
Cyclone Dia mm 1850
Net Weight kg 8500
Screen Width mm 1500
No. of Rubber Balls / Ball Frame Each 140
No. of Screens Per Machine Each 24
No. of Rubber Balls / Machine Each 3360
Length of Bottom Frame mm 4125
Width of Bottom Frameh mm 1985
Machine Height without Fan mm 5080
Capacity* (on Wheat Basis) TPH UP TO 250
View Complete Details

Color Sorter

Fowler Westrup Color Sorter offers an ideal solution to maximize the yield. Our technology precisely sorts the processed grain for any defects based on color, this will ensure absolute consistency and best quality grains. The automatic trichromatic sorting technology will ensure faster and better and more accurate sorting to the processed grains.


Applications

Rice:- Raw, Steamed, Boiled & Parboiled


Grains:- Paddy, Maize & Wheat


Seeds:-Sesame, Poppy, Sunflower, Pumpkin, Watermelon, Mustard, Tamarind, Coriander & Many


Pulses:-Black gram, Bengal gram, Moth Bean, Pigeon Pea, Toor Dal, Masoor Dal, Moong Dal, Moth dal, Urad dal, Fried Gram, Black Beans, Green Pea, Black-eyed pea, Soya bean


Spices:-Pepper, Cardamom, Dehydrated Garlic/ Onion, Cumin Seeds, Coriander, Fenugreek (Methi), Mustard& Many


Dry fruits:-Broken / Whole cashew nuts, Resins, Walnuts, Almond


Others:-Millet-Bhagar, Bajra, Ragi, Tea, Coffee, Rice Flakes (Poha), Sabudana (Sagu), Rajma, Peanut, Peanut Pod, Jowar, Sorghum & Millet.


Special Features

  1. Wide range models up to 10 chutes

  2. High definition 6144-pixel color CCD camera image acquisition system

  3. Very high-resolution Inspection (from 0.05 mm onwards)

  4. Long lasting and low power consuming LED lights

  5. Wide range of applications

  6. Product contact part in Stainless Steel (SS)

  7. User-friendly interface Best Rejection Ratio with reverse resorting

  8. High-speed serviceable ejectors

  9. Longer machine life & lower operation cost

  10. Effective dust extraction system

  11. Chute heating system ( Optional)Fowler Westrup Color Sorter offers an ideal solution to maximize the yield. Our technology precisely sorts the processed grain for any defects based on color, this will ensure absolute consistency and best quality grains. The automatic trichromatic sorting technology will ensure faster and better and more accurate sorting to the processed grains.
    Applications

    Rice:- Raw, Steamed, Boiled & Parboiled


    Grains:- Paddy, Maize & Wheat


    Seeds:-Sesame, Poppy, Sunflower, Pumpkin, Watermelon, Mustard, Tamarind, Coriander & Many


    Pulses:-Black gram, Bengal gram, Moth Bean, Pigeon Pea, Toor Dal, Masoor Dal, Moong Dal, Moth dal, Urad dal, Fried Gram, Black Beans, Green Pea, Black-eyed pea, Soya bean


    Spices:-Pepper, Cardamom, Dehydrated Garlic/ Onion, Cumin Seeds, Coriander, Fenugreek (Methi), Mustard& Many


    Dry fruits:-Broken / Whole cashew nuts, Resins, Walnuts, Almond


    Others:-Millet-Bhagar, Bajra, Ragi, Tea, Coffee, Rice Flakes (Poha), Sabudana (Sagu), Rajma, Peanut, Peanut Pod, Jowar, Sorghum & Millet.


    Special Features

    1. Wide range models up to 10 chutes

    2. High definition 6144-pixel color CCD camera image acquisition system

    3. Very high-resolution Inspection (from 0.05 mm onwards)

    4. Long lasting and low power consuming LED lights

    5. Wide range of applications

    6. Product contact part in Stainless Steel (SS)

    7. User-friendly interface Best Rejection Ratio with reverse resorting

    8. High-speed serviceable ejectors

    9. Longer machine life & lower operation cost

    10. Effective dust extraction system

    11. Chute heating system ( Optional)


 

Model TCR 64 TCR 128 TCR 192 TCR 256 TCR 320 TCR 384 TCR 448 TCR 512 TCR 640
Channels 64 No's 128 No's 192 No's 256 No's 320 No's 384 No's 448 No's 512 No's 640 No's
*Capacity (Input) Up to 1TPH Up to 2TPH Up to 3TPH Up to 4TPH Up to 5TPH Up to 6TPH Up to 7TPH Up to 8TPH Up to 10TPH
Machine Dimension (WxDxH)in mm 846x1607 x1953 1250x1607 x1953 1875x1607 x1953 1920x1607 x1953 2095x1540 x1845 2410x1540 x1845 2725x1540 x1845 3040x1540 x1845 3925x1540 x1925
Net weight in Kg's 350 400 500 600 970 1100 1200 1400 1600
Power Requirement 1.2 KW 1.7 KW 2.2 KW 3.2 KW 3.7 KW 4.2 KW 4.7 KW 5.7 KW 6.9 KW
Voltage 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ
Servo Stabilizer with isolation transformer 2KVA
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • FOWLER WESTRUP (INDIA) PVT. LIMITED (FOWLER WESTRUP (INDIA) PVT. LIMITED)
  • ( A Joint Venture of John Fowler and Westrup, Denmark ) Plot No. 60 - 63, KIADB Industrial Area, Malur, Kolar, Karnataka - 563160
  • Share us via