Coimbatore, Tamil Nadu, India
Our Products
The latest technology in desiccant Air Dryers offers total cleaning and drying solution for lubricated as well as non-lubricated Compressors. Coalescing filters(boro silicate micro glass fibres) assure maximum removal of oil and liquid moisture upto 0.3 microns. Compressed air at -40C dew point.
| Model | Flow scfm | End connection BSP | Dimensions(mm) | Weight | Recommended Accessories | |||
| H | W | D | KGs | Pre filter(1) |
Post filter(2) |
|||
| DrySpell 5 | 5 | 1/2" | 390 | 280 | 200 | 9 | G 24 P | G 24 Y |
| DrySpell 10 | 10 | 1/2" | 600 | 280 | 200 | 11 | G 24 P | G 24 Y |
| DrySpell 20 | 20 | 1/2" | 1015 | 280 | 200 | 16 | G 100 P | G 100 Y |
| DrySpell 30 | 30 | 1/2" | 810 | 350 | 260 | 28 | G 100 P | G 100 Y |
| DrySpell 45 | 45 | 1/2" | 1055 | 350 | 260 | 34 | G 100 P | G 100 Y |
| DrySpell 60 A | 60 | 3/4" | 1250 | 350 | 285 | 43 | G 100 P | G 100 Y |
| DrySpell 100 | 100 | 1" | 1540 | 415 | 300 | 81 | G 250 P | G 250 Y |
Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +3C.
At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Automatic Drain Valve.
The cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger where it is reheated by the incoming warm air.
| Model | Flow in scfm | Power Consumption in KW | End Connection | Dimensions in mm | Weight in Kg | Max. Working Pressure | |||
| R 134a | R 407a | H | W | D | |||||
| Nippydry 20 | 20 | 0.36 | - | 1" BSP | 395 | 400 | 430 | 55 | 16 |
| Nippydry 40 | 40 | 0.36 | - | 1" BSP | 525 | 450 | 475 | 55 | 16 |
| Nippydry 50 | 50 | 0.36 | - | 1" BSP | 525 | 450 | 475 | 55 | 16 |
| Nippydry 60 | 60 | 0.36 | - | 1" BSP | 525 | 450 | 475 | 55 | 16 |
| Nippydry 80 | 80 | 0.85 | - | 1" BSP | 675 | 485 | 525 | 70 | 16 |
| Nippydry 100 | 100 | 0.85 | - | 1" BSP | 675 | 485 | 525 | 70 | 16 |
| Nippydry 150 | 150 | 1.02 | - | 1 1/2" BSP | 852 | 670 | 700 | 110 | 16 |
| Nippydry 200 | 200 | - | 1.40 | 1 1/2" BSP | 852 | 670 | 700 | 130 | 16 |
| Nippydry 250 | 250 | - | 1.40 | 1 1/2" BSP | 852 | 670 | 700 | 130 | 16 |
| Nippydry 300 | 300 | - | 1.85/td> | 2" NB | 1020 | 680 | 980 | 240 | 14 |
| Nippydry 400 | 400 | - | 2.10 | 2" NB | 1020 | 680 | 980 | 260 | 14 |
| Nippydry 500 | 500 | - | 2.40 | 2" NB | 1020 | 680 | 980 | 290 | 14 |
| Nippydry 650 | 650 | - | 3.30 | 2" NB | 1020 | 1000 | 1400 | 350 | 14 |
| Nippydry 800 | 800 | - | 4.00 | 3" NB | 1020 | 1000 | 1400 | 490 | 14 |
| Nippydry 1000 | 1000 | - | 4.80 | 3" NB | 1020 | 1000 | 1400 | 580 | 14 |
Dryspell medical Dryers delivers a dewpoint of +2C as mandated byNFPA 99. The dryspell medical dryers operates with the principle of Pressure Swing Adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.
Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Dewpoint and CO monitor enables ti monitor dewpoint and CO levels as mandated byNFPA 99
| Model | Flow scfm | End connection BSP | Dimensions(mm) | ||
| H | W | D | |||
| TBAS 10 | 10 | 1/2" | 600 | 840 | 600 |
| TBAS 20 | 20 | 1/2" | 600 | 1050 | 780 |
| TBAS 30 | 30 | 1/2" | 810 | 1050 | 780 |
| TBAS 45 | 45 | 1/2" | 1055 | 1050 | 780 |
| TBAS 60A | 60 | 1" | 1250 | 1250 | 855 |
| TBAS 100 | 100 | 1" | 1540 | 1245 | 900 |
| TBAS 200 | 200 | 1 1/2" | 1540 | 1350 | 1300 |
