Our Products
1. ICU Bed with adjustable backrest, knee rest, height and trendlenburg / Reverse Trendlenburg positions on separate crank mechanism, provided at foot end of the bed. Main bed frame made of 60 mm x 30 mm x 16 gauge Mild Steel rectangular tube. 1.2 mm thick CRCA Perforated Sheet Top.
2. Polymer Moulded Removable Head & Foot Board. Collapsible type/ four part moulded safety side railing. Four locations for IV pole. Mounted on 125 mm dia polymer moulded anti rust type swivel castors, two with brakes. Urine bag holder, telescopic IV pole.
3. Thoroughly pre treated and epoxy powder coated.
Size:
4 piece tuck away butterfly shaped side railings made of ABS. Available in Blue and Wooden colours
Size:
Description:
1. CRCA sheet construction. Two section upholstered top, main frame having three drawers and cabinet with sliding doors. Head section adjustable on lockable gas spring.
Size:
Single dome shadowless cold light with unrestricted radial and vertical movements.
Technical Specificatios:
Size:
1. Mild Steel tubular construction of 25 mm dia x 16 gauge thick. Mattress plane made of 0.8 mm thick CRCA sheet. Safety railing on four sides. Fitted with hook for hanging fluids. Mounted on four swivel castors of 50 mm dia.
2. Pre treated and epoxy powder coated synthetic enamel finish.
Size:
1. Mild Steel/Stainless Steelbox quality of304
2. Thermostat fitted for 508mm L X 254mm W X 203 mm H, also with electrical parts.
3. Perforated tray inside the box with handle.
4. Pinion/lifting handle both facilities. Mounted on buffer.
Size:
Description:
1. Mild Steel cage mounted on rectangular tubular stand with castors, facility to swing and lock. Complete with fluid hanging adjustable hook and mattress.
2. Pre treated and epoxy powder coated finish.
Size:
Description:
Size:
1. Stainless steel 25 mm dia x 18 gauge tubular structure with two Stainless Steel shelves. Six colour removable bins and two polystyrene lockable storage units with three drawers each.
2. Epoxy powder coated Oxygen cylinder carrier, Stainless Steel IV rod and cardiac massage board. Corner buffers on all four sides. Mounted on four 125 mm dia synthetic body swivel castors, two with brakes.
Size:
Description:
1. Built of tubular steel of 25 mm and 31 mm dia.
2. Suitable to carry one 0.566 or 1.132 cu mtrs. Cylinder. Chain to secure the cylinder.
3. Mounted on four 50 mm dia swivel castors.
4. Synthetic enamel/ epoxy powder coated finish.
Size:
1. Vertical members of 25 mm dia MS tube. Rings made of 12 mm dia MS rod. Suitable to hold two 350 mm dia bowl. Mounted on 50 mm dia swivel castors.
2. Synthetic enamel/Epoxy powder coated finish.
Size:
Size:
Description:
1. Spine Board is commonly used for safely transporting serious;y injured & immobile
2. It can float on weater, allowed x-rays & also used together with head immobilizer
Size:
We are the main supplier of this product.
Description:
1. Made of high strength alluminium alloy thick wall pipes
2. The bed surface is made of foamed cushion & the adjustable back making the wounded feel comfortable
Size:
Description:
1. Folding Strecher with canvas & bag( 2 & 4 fold)
Size:
Description:
Size:
Description:
1. Stainless steel instrument tray (with cover) used for storing or soaking instruments.
2. These trays are also great for tweezers and all facial instruments.
3. Made of heavy gauge Stainless Sheet Sheet.
Size:
Size:
Drum capacity of:
Separately heater 3 nos. 1000 X 3= 3000 w, with heat iron coir. Finish with heavy polish.
Size:
Description:
Size:
Features Of EASY MOVE :
EASY MOVE is made up of a special polycarbonate plastic which does not break. The length of the board is approximately 170cms and the width is 50cms .The Board can be bent over 120oand it will not break.
Advantages of EASY MOVE:
1) Total Support for the patients body from Head to Toe.2) Only 1 Nurse/ attendant required for a successful Patient Transfer3) No Risk of back injury & Back pain to the nursing staff who aid in patient transfer.4) EASY MOVE is Lightweight, Radiolucent & Impact Resistant.5) EASY MOVE Made Up Of Special Plastic that is Unbreakable.7) Weighs less than 4 Kgs, and can transfer People with weight of up to 225 Kgs
8) Lifelong Reusable if maintained properly.9) No chance of infection to patient or nurse as it can be cleaned with any Antiseptic Solution or Mild Disinfectant after every procedure if required.10) Helps to Bridge the Gap & Height Difference between Trolley and Hospital Bed.
Size:
Description:
CRCA sheet construction. Two section upholstered top, main frame having three drawers , 3 cabinets with godrej locking system, BP Machine Pad, Head section is adjustable on lockable gas spring.
Sliding Foot step attached
Mattress is 3 thick, made of foam covered with Rexene.
Overall approximate dimension- 72 L x 22 W x 30 H.
Powder coated enamel finish
Size:
Description:
Size:
Description:
1.Bowel construction made of Stainless Steel Sheet of quality 304. Double chambers made of SS cast iron base. Covered with chrome. Body made of Stainless Steel from inside & outside. Foot pedal made of good quality iron.
2.Separately heater 3 nos. 1000 X 3= 3000 w, with heat iron coir. Finish with heavy polish.
Size:
1. CRCA sheet construction. Four compartments with glass paneled doors. Locking arrangement.
2. Synthetic enamel finish.
Size:
Description:
Size:
Size:
We are the main supplier of this product.
Description:
1. Built of 38 mmx 38 mm x 3 mm Mild Steel angle iron. 1 mm thick CRCA sheet shelves.
2. Four/Five shelves. Synthetic enamel finish. Height in four shelves 125mm.
Size:
1. SS Sheet machine passed spinning bowl. Sterilization belt (SS). Lockable knob with Stainless Steel handle.
2. Finish with heavy polish.
Size:
1. Mobile shadow less light. 350 mm dia single reflector. Light head can be adjusted easily. Halogen lamp.
2. Heat absorbing glass filter.
Size:
1. Five pronged Mild Steel base with 50 mm dia castors. 31mm Dia 18 gauge SS/MS tube. 10 mm dia. Stainless Steel rod with double hooks. Height adjustment from 1370 mm to 2400 mm.
2. Mild Steel base epoxy powder coated and Stainless Steel parts are buffed bright.
Size:
Description:
Size:
Description:
Size:
Description:
ABS Head & Leg Panels, Available in Blue & Wooden Colours
Size: