Gadre Industries

Kaneri, Kolhapur, Maharashtra

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgw-8bbpower rating (bhp)8power rating (kw)5.9speed (rpm)1500bore x stoke (mm)95x110cubic cap. (cc)780no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional-anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.7nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period ( hrs.). Engine running at full load7.2l.o. Systemg.p.weight bare/gross (kg)160/235overall dimensionbare l x w x h mm545x480x845packing l x w x h mm685x570x940starting systemhand start with cranking handlepower take offflywheel end

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgma-5power rating (bhp)5power rating(kw)3.7speed (rpm)1500bore x stoke (mm)87.5x80cubic cap. (cc)481no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)24bumping clearance (mm)+1.2nominal compression ratio16.5:1l.o.sump capacity (ltrs)1.5l.o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)3.75fuel tank refilling time period ( hrs.). Engine running at full load3.8l.o. Systemp.p.weight bare/gross (kg)90/130overall dimensionbare l x w x h mm450x420x660packing l x w x h mm585x510x705starting systemhand start with cranking handlepower take offflywheel end, optional gear end at half speed drive

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgvr-iipower rating (bhp)6.5power rating (kw)4.7speed (rpm)1500bore x stoke (mm)85x110cubic cap. (cc)624no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional-anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.9nominal compression ratio16.5:1l.o.sump capacity (ltrs)2.85l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)6.5fuel tank refilling time period ( hrs.). Engine running at full load5.0l.o. Systemp.p.weight bare/gross (kg)145/220overall dimensionbare l x w x h mm525x465x845packing l x w x h mm685x570x940starting systemhand start with cranking handlepower take offflywheel end

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgair-1power rating (bhp)6.5power rating(kw)4.7speed (rpm)1500bore x stoke (mm)87.5x110cubic cap. (cc)661no of cylinder1dir. Of rotationclockwise when looking from the flywheelfuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+1.2nominal compression ratio16.5:1l.o.sump capacity (ltrs)1.5l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)6.5fuel tank refilling time period ( hrs.). Engine running at full load5.0l.o. Systemp.p.weight bare/gross (kg)155/230overall dimensionbare l x w x h mm550x480x841packing l x w x h mm760x595x941starting systemhand start with cranking handlepower take offflywheel end

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgar-6.5gppower rating (bhp)6.5power rating(kw)4.7speed (rpm)1500

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgw-10power rating (bhp)10power rating (kw)7.4speed (rpm)1500bore x stoke (mm)102x116cubic cap. (cc)948no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft 1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.9nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period (hrs.). Engine running at full load5.7l.o. Systemg.p.weight bare/gross (kg)180/255overall dimensionbare l x w x h mm550x530x845packing l x w x h mm845x570x940starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end, optional gear end at half/ full speed drive

We are offering water cooled diesel generator. details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgmw-35power rating (bhp)3.5power rating (kw) 2.6speed (rpm)1500bore x stoke (mm)80x80cubic cap. (cc)402no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)24bumping clearance (mm)+1.4nominal compression ratio16.5:1l.o.sump capacity (ltrs)1.5l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)3.75fuel tank refilling time period (hrs.). Engine running at full load5.3l.o. Systemp.p.weight bare/gross (kg)85/125overall dimension bare l x w x h mm 520x410x660packing l x w x h mm585x510x705starting systemhand start with cranking handlepower take offflywheel end

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgma-4power rating (bhp)4power rating(kw)2.9speed (rpm)1500bore x stoke (mm)80x80cubic cap. (cc)402no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)24bumping clearance (mm)+1.4nominal compression ratio16.5:1l.o.sump capacity (ltrs)1.5l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)3.75fuel tank refilling time period ( hrs.). Engine running at full load4.7l.o. Systemp.p.weight bare/gross (kg)90/130overall dimensionbare l x w x h mm450x420x660packing l x w x h mm585x510x705starting systemhand start with cranking handlepower take offflywheel end, optional gear end at half speed drive

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgaa-6.5power rating (bhp)6.5power rating (kw)4.7speed (rpm)1500bore x stoke (mm)87.5x110cubic cap. (cc)661no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+1.2nominal compression ratio16.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)6.5fuel tank refilling time period ( hrs.). Engine running at full load5l.o. Systemg.p.weight bare/gross (kg)170/245over all dimensionbare l x w x h mm550x480x841(for aa models 575x520x845)packing l x w x h mm760x595x941(for aa models 785x635x950)starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end optional hand gear at half / full speed drive

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgaa-10power rating (bhp)10power rating (kw)7.4speed (rpm)1500bore x stoke (mm)102x116cubic cap. (cc)948no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.9nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period ( hrs.). Engine running at full load5.7l.o. Systemg.p.weight bare/gross (kg)205/285over all dimensionbare l x w x h mm550x480x841(for aa models 575x520x845)packing l x w x h mm760x595x941(for aa models 785x635x950)starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end optional hand gear at half / full speed drive

we are offering Air Cooled Diesel Generator . Details

• Vertical type
• 4Stroke cycle
• Single acting
• Totally enclosed
• High speed
• Compression ignition diesel engine

SpecificationsModelGAR-10Power Rating (bhp)10Power Rating(kW)7.4Speed (rpm)1500Bore x Stoke (mm)102X116Cubic cap. (cc)948No of cylinder1Dir. of rotationClockwise when looking from the flywheel. Optional- AnticlockwiseFuel pump/Inject Make/TypeMake Mico/Usha .Type single cylinder flange mounted without camshaft1no. for single cylinder & 2 nos. for twin cylinderFuel inj.pre.(kg/sq.cm)190/210Fuel injection timing BTDC (degree)27Bumping clearance (mm)+0.9Nominal compression ratio17.5:1L.O.sump capacity (ltrs)3.75L .O. consumption1.3 to 1.7% of SFCGovernor Type/ClassType-mechanical centrifugal Class-B1 or A2 depending on applicationSpecific fuel consump. (gm/kWh)251Fuel oil recommendedHigh speed diesel as per IS :1460L.O. specificationHD-type 3 as per IS : 496-1982 /SAE 20W40Fuel tank capacity (ltrs)11.5Fuel tank refilling time period ( hrs.). Engine running at full load5.7L.O. systemG.P.Weight Bare/Gross (kg)190/265Overall dimensionbare L x W x H mm550X480X841(For AA models 575X520X845)packing L x W x H mm760X595X941(For AA models 785X635X950)Starting SystemHand start with cranking handlePower take offFlywheel end, Optional hand gear at half / full speed drive

We are offering water cooled diesel generator . details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgtw-20power rating (bhp)20power rating (kw) 14.7speed (rpm)1500bore x stoke (mm)102x116cubic cap. (cc)1896no of cylinder2dir. Of rotationclockwise when looking from the flywheel. Optional-anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.9nominal compression ratio17.5:1l.o.sump capacity (lts)7l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period ( hrs.). Engine running at full load3.6l.o. Systemg.p.weight bare/gross (kg)285/385overall dimension bare l x w x h mm 770x580x845packing l x w x h mm950x685x950starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end, optional gear end at half/ full speed drive

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgw-14power rating (bhp)14power rating (kw)11.7speed (rpm)1500bore x stoke (mm)114.3x116cubic cap. (cc)1190no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft 1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+1.4nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period (hrs.). Engine running at full load4.10l.o. Systemg.p.weight bare/gross (kg)185/260overall dimensionbare l x w x h mm550x530x845packing l x w x h mm845x570x940starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end, optional gear end at half/ full speed drive

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgvr-iiipower rating (bhp)5power rating (kw)3.7speed (rpm)1500bore x stoke (mm)80x110cubic cap. (cc)553no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional-anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+1.2nominal compression ratio16.5:1l.o.sump capacity (ltrs)2.85l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)6.5fuel tank refilling time period ( hrs.). Engine running at full load6.5l.o. Systemp.p.weight bare/gross (kg)145/220overall dimensionbare l x w x h mm525x465x845packing l x w x h mm685x570x940starting systemhand start with cranking handlepower take offflywheel end

We are offering water cooled diesel generator. details

• vertical
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgw-8pppower rating (bhp)8power rating (kw)5.9speed (rpm)1500bore x stoke (mm)95x110cubic cap. (cc)780no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional-anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft 1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.7nominal compression ratio17.5:1l.o.pump capacity (ltrs)3.75l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period (hrs.). Engine running at full load7.2l.o. Systemg.p.weight bare/gross (kg)160/235overall dimensionbare l x w x h mm545x480x845packing l x w x h mm685x570x940starting systemhand start with cranking handlepower take offflywheel end

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgar-7power rating (bhp)7power rating(kw)5.1speed (rpm)1800bore x stoke (mm)87.5x110cubic cap. (cc)661no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)30bumping clearance (mm)+1.2

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgar-8power rating (bhp)8power rating(kw)5.9speed (rpm)1500bore x stoke (mm)95x110cubic cap. (cc)780no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.7nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period ( hrs.). Engine running at full load7.2l.o. Systemg.p.weight bare/gross (kg)185/260overall dimensionbare l x w x h mm550x480x841(for aa models 575x520x845)packing l x w x h mm760x595x941(for aa models 785x635x950)starting systemhand start with cranking handlepower take offflywheel end, optional hand gear at half / full speed drive

We are offering water cooled diesel generator . details

• vertical type
• 4 stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgmw-50power rating (bhp)5power rating (kw)3.7speed (rpm)1800bore x stoke (mm)80x80cubic cap. (cc)402no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj. Pre. (kg/sq.cm)190/210fuel injection timing btdc (degree)24bumping clearance (mm)+1.4nominal compression ratio16.5:1l.o.sump capacity (ltrs)1.5l .o. Consumption0.8 to 1.2 % of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)3.75fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)3.75fuel tank refilling time period (hrs.). Engine running at full load3.8l.o. Systemp.p.weight bare/gross (kg)85/125overall dimensionbare l x w x h mm520x410x660packing l x w x h mm585x510x705starting systemhand start with cranking handlepower take offflywheel end

We are offering Water Cooled Diesel Generator. Details

• Vertical type
• 4 Stroke Cycle
• Single Acting
• Totally Enclosed
• High Speed
• Compression Ignition Diesel Engine

We are offering water cooled diesel generator . details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

We are offering air cooled diesel generator. details

• vertical type
• 4stroke cycle
• single acting
• totally enclosed
• high speed
• compression ignition diesel engine

specificationsmodelgaa-8power rating (bhp)8power rating (kw)5.9speed (rpm)1500bore x stoke (mm)95x110cubic cap. (cc)780no of cylinder1dir. Of rotationclockwise when looking from the flywheel. Optional- anticlockwisefuel pump/inject make/typemake mico/usha .type single cylinder flange mounted without camshaft1no. For single cylinder & 2 nos. For twin cylinderfuel inj.pre.(kg/sq.cm)190/210fuel injection timing btdc (degree)27bumping clearance (mm)+0.7nominal compression ratio17.5:1l.o.sump capacity (ltrs)3.75l .o. Consumption1.3 to 1.7% of sfcgovernor type/classtype-mechanical centrifugal class-b1 or a2 depending on applicationspecific fuel consump. (gm/kwh)251fuel oil recommendedhigh speed diesel as per is :1460l.o. Specificationhd-type 3 as per is : 496-1982 /sae 20w40fuel tank capacity (ltrs)11.5fuel tank refilling time period ( hrs.). Engine running at full load4.6l.o. Systemg.p.weight bare/gross (kg)200/280over all dimensionbare l x w x h mm550x480x841(for aa models 575x520x845)packing l x w x h mm760x595x941(for aa models 785x635x950)starting systemhand start with cranking handle optional 12 v electric startpower take offflywheel end optional hand gear at half / full speed drive