Our Products
These vertical watercooled compressors are available in lubricated and non lubricated construction. They are economical because of lower installation cost, lower maintenance and lower operating cost. They are useful in textiles, pneumatics, petrochemicals, foundries, chemicals-glass-cement-sugar ind. Etc. |
Model No |
Motor HP |
Pisten Displacement CFM |
Maximum Pressure PSIG Kg/cm2 |
|
GC-7X5 LUB/NL | 25/30 | 134.0 / 164.0 | 125 | 8.80 |
GC-8X5 LUB/NL | 30/40 | 171.0 / 215.0 | 100 | 7.00 |
GC-8X7 LUB/NL | 40/50 | 220.0 / 260.0 | 135 | 9.50 |
GC-9X7 LUB/NL | 50/60 | 179.0 / 330.0 | 100 | 7.00 |
these compressors are suitable for applications where air pressure is required upto 17.5 kg / cm2g (250 psig). They are useful in textile industries, plastic industries, paper industries, spray painting, blowering, cleaning, chemical plants, garages, tyre inflation, pneumatic operations, engineering industries, shot blasting, cement plant, mining, pharmaceuticals, pastiside, foundry, oil industries etc.
Model |
Motor HP |
No.Of Piston |
Piston Displacement CFM |
Pressure PSIG |
Receiver Litre |
GC - 184 SS | 2.0 / 3.0 | 2 | 6.0 / 8.5 | 150 | 135 / 160 |
GC - 284 | 2.0 / 3.0 | 2 | 6.7 / 9.8 | 200 | 160 / 200 |
GC - 2390 | 3.0 / 5.0 | 2 | 8.9 / 11.0 | 200 | 160 / 200 |
GC - 292 | 5.0 | 2 | 17.3 | 200 | 200 / 240 |
GC - 2525 | 5.0 / 7.5 | 2 | 17.3 / 22.0 | 200 | 200 / 240 |
GC - 303 | 7.5 | 2 | 23.8 | 200 | 240 / 300 |
GC - 2595 | 7.5 / 10.0 | 2 | 24.0 / 30.0 | 200 | 240 / 300 |
GC - 2650 | 10.0 | 2 | 30.0 | 200 | 240 / 300 |
GC - 121T2 | 10.0 / 125.5 | 2 | 32.9 / 44.0 | 200 | 300 / 500 |
GC - 7150 | 12.5 / 15.0 | 2 | 55.0 / 60.5 | 200 | 300 / 500 |
GC - 65T | 15.0 / 20.0 | 3 | 54.4 / 81.8 | 200 | 500 / 625 |
GC - 75T | 20.0 / 25.0 | 3 | 65.8 / 98.7 | 150 | 500 / 625 |
GC - 3050 | 25.0 / 40.0 | 3 | 85.8 / 112.0 | 150 | 500 / 625 |
GC - 65TD | 30.0 / 40.0 | 3 + 3 | 110.0 / 145.0 | 150 | 750 / 1000 |
GC - 75TD | 40.0 / 50.0 | 3 + 3 | 132.0 / 166.0 | 150 | 750 / 1000 |