Used in Structural and fabricationsProducres: SAIL/VSNL/Local makes

Thickness : 3.00-200mmWidth : StandardLength:StandardMake ; SAIL/ESSAR/TATA/JINDAL

Thickness 3.00 to 10mm width from 1000-1500mm length can be customisedchequered pattern : tear dropgrade : is 3502/is2062 grade "b" killedmake : sail(rsp), essar, jindal.

Used in Construnction of Buildings thickness from 8.00-32mmtisconsailjindalrathikamdhenu

thickness .30-3.00 width 600-1500mm zinc coat 70-275gm/sq meter surface : chromated zero spangle/galvanealed/gpsp oiled grade : d, dd, edd.if, hsq/hsif

Prepained corrugated sheets and profiles, trapezoidal profile, wall cladding, cirved roofing, ridges, gutters, fasteners. Thickness .25-2.00mmtop coat 20-25 micronback coat 5-10 micronzinc coat 80-275gm/sq meter

Thickness : 1.60-4.00mmWidth : StandardLength: CustomisedMake: SAILTATAESSARJINDAL

GALVALUME COILSSHEETS is a superior product renowned for its excellent corrosion resistance and heat reflectivity. The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. Applied by the traditional hot-dipping process, the product is ideal for applications requiring superior corrosion resistance and heat reflectivity, typically required for building construction, appliances, and IN several non-exposed automotive components. The products shiny spangled appearance is attractive and can be used without painting.

We offer a vast range of black and galvanized Tubular and Round pipes of various thickness and dimensions.

We offer Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. MS Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.

We offer the finest quality MS Angles, which are extensively used in fabrication industry. The dimension is determined by the length and the thickness of the two sides. The most commonly found steel angles are formed at a 90 degree angle and has two legs of equal length. The sides are either equal or of different sizes, if one leg is longer than the other then it is known as UNEQUAL angle. The steel angles of various strength like HT (High Tensile)/MS are formed as required by different applications. These products are used in bracket, trimming, transmission line, framing and reinforcement. Our company also stocks and supplies Tower sections against orders of clients.Width

We offer the finest quality MS Channels and Columns, which are extensively used in fabrication industry. A channel is a right angle "C" section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. Mostly MS Channels are used as supports and guide. These are roll-formed products. MS Channels are usually applied in the automotive industry as well as heavy machinery industries. Generally, there are 3 types of mild steel channel, Plain Channels, Lipped Channels & Universal Channels.

We offer the finest quality MS Beams, Joists, Girders which is the most sought after sections by the structural engineers, architects and construction companies all over the world. With infrastructure development playing the lead in todays global scenario Indian engineers and architects are exploring better options to go beyond the conventional norms and to win over the challenges of modern constructions. They are widely used in Industrial Buildings, Multi Storey Building, Road Bridge composite construction, Industrial structures Railways, Ports and Harbour, Offshore Drilling Rigs and in addition to above mentioned utilities, MS Beams/Joists are used in Heavy machinery, industrial boilers, wagon tippers, feeders, stackers, crushers, loaders, cranes, shipping industry and supporting frames for equipment used in metallurgical and other heavy industries.

This is Cold Rolled Sheets/Strips coated with zinc metal there after coated by Paint. Process is . Mainly used in roofing, paneling, wall cladding, house hold appliances, Furniture, and automotive products etc.

GALVALUME COILS/SHEETS is a superior product renowned for its excellent corrosion resistance and heat reflectivity. The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. Applied by the traditional hot-dipping process, the product is ideal for applications requiring superior corrosion resistance and heat reflectivity, typically required for building construction, appliances, and IN several non-exposed automotive components. The products shiny spangled appearance is attractive and can be used without painting.

Mainly produced by Tata steel under brand GALVANO as well as by other producers like Jindal/Indian/Bhushan. GPSP sheets are ideally used in making panels and the bodies of buses and sheet metal parts of electronic appliances. Superior zinc adhesion is achieved to the sheets and coil forms. Its benefits includes Consistent thickness, superior surface finish & absolute flatness, highest corrosion resistance, uniform and superior zinc adhesion, optimum formability, superior paint adhesion.

Chequered plates with distinct design and highly slip resistant. It can be easily configured into a variety of designs and patterns as per the clients requirement. We are a a leading provider of quality chequered plates with quality and functionality that meet international standards

We maintains stock of Steel Plates manufactured by finest mills around the globe which makes the quality of plates we supply most reliable and appropriate. We offer complete range of Structural Steel Plates / High Tensile Steel Plates , Boiler Quality (BQ Plates) / Pressure Vessel Quality Steel Plates , Ship Building Steel Plates.

Used in Structural and fabricationsProducres: SAIL/VSNL/Local makes

Thickness : 3.00-200mmWidth : StandardLength:StandardMake ; SAIL/ESSAR/TATA/JINDAL

Thickness 3.00 to 10mm width from 1000-1500mm length can be customisedchequered pattern : tear dropgrade : is 3502/is2062 grade "b" killedmake : sail(rsp), essar, jindal.

Used in Construnction of Buildings thickness from 8.00-32mmtisconsailjindalrathikamdhenu

thickness .30-3.00 width 600-1500mm zinc coat 70-275gm/sq meter surface : chromated zero spangle/galvanealed/gpsp oiled grade : d, dd, edd.if, hsq/hsif

Prepained corrugated sheets and profiles, trapezoidal profile, wall cladding, cirved roofing, ridges, gutters, fasteners. Thickness .25-2.00mmtop coat 20-25 micronback coat 5-10 micronzinc coat 80-275gm/sq meter

Thickness : 1.60-4.00mmWidth : StandardLength: CustomisedMake: SAILTATAESSARJINDAL

GALVALUME COILSSHEETS is a superior product renowned for its excellent corrosion resistance and heat reflectivity. The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. Applied by the traditional hot-dipping process, the product is ideal for applications requiring superior corrosion resistance and heat reflectivity, typically required for building construction, appliances, and IN several non-exposed automotive components. The products shiny spangled appearance is attractive and can be used without painting.

We offer a vast range of black and galvanized Tubular and Round pipes of various thickness and dimensions.

We offer Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. MS Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.

We offer the finest quality MS Angles, which are extensively used in fabrication industry. The dimension is determined by the length and the thickness of the two sides. The most commonly found steel angles are formed at a 90 degree angle and has two legs of equal length. The sides are either equal or of different sizes, if one leg is longer than the other then it is known as UNEQUAL angle. The steel angles of various strength like HT (High Tensile)/MS are formed as required by different applications. These products are used in bracket, trimming, transmission line, framing and reinforcement. Our company also stocks and supplies Tower sections against orders of clients.Width

We offer the finest quality MS Channels and Columns, which are extensively used in fabrication industry. A channel is a right angle "C" section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. Mostly MS Channels are used as supports and guide. These are roll-formed products. MS Channels are usually applied in the automotive industry as well as heavy machinery industries. Generally, there are 3 types of mild steel channel, Plain Channels, Lipped Channels & Universal Channels.

We offer the finest quality MS Beams, Joists, Girders which is the most sought after sections by the structural engineers, architects and construction companies all over the world. With infrastructure development playing the lead in todays global scenario Indian engineers and architects are exploring better options to go beyond the conventional norms and to win over the challenges of modern constructions. They are widely used in Industrial Buildings, Multi Storey Building, Road Bridge composite construction, Industrial structures Railways, Ports and Harbour, Offshore Drilling Rigs and in addition to above mentioned utilities, MS Beams/Joists are used in Heavy machinery, industrial boilers, wagon tippers, feeders, stackers, crushers, loaders, cranes, shipping industry and supporting frames for equipment used in metallurgical and other heavy industries.

This is Cold Rolled Sheets/Strips coated with zinc metal there after coated by Paint. Process is . Mainly used in roofing, paneling, wall cladding, house hold appliances, Furniture, and automotive products etc.

GALVALUME COILS/SHEETS is a superior product renowned for its excellent corrosion resistance and heat reflectivity. The alloy coated product nominally contains 55% aluminum, 43.5% zinc and 1.5% silicon by weight. Applied by the traditional hot-dipping process, the product is ideal for applications requiring superior corrosion resistance and heat reflectivity, typically required for building construction, appliances, and IN several non-exposed automotive components. The products shiny spangled appearance is attractive and can be used without painting.

Mainly produced by Tata steel under brand GALVANO as well as by other producers like Jindal/Indian/Bhushan. GPSP sheets are ideally used in making panels and the bodies of buses and sheet metal parts of electronic appliances. Superior zinc adhesion is achieved to the sheets and coil forms. Its benefits includes Consistent thickness, superior surface finish & absolute flatness, highest corrosion resistance, uniform and superior zinc adhesion, optimum formability, superior paint adhesion.

Chequered plates with distinct design and highly slip resistant. It can be easily configured into a variety of designs and patterns as per the clients requirement. We are a a leading provider of quality chequered plates with quality and functionality that meet international standards

We maintains stock of Steel Plates manufactured by finest mills around the globe which makes the quality of plates we supply most reliable and appropriate. We offer complete range of Structural Steel Plates / High Tensile Steel Plates , Boiler Quality (BQ Plates) / Pressure Vessel Quality Steel Plates , Ship Building Steel Plates.