Our Product / Services
acquiring our premium and high-grade range of product is hassle free as our organization is located in vadodara(india), which is easily accessible by road, rail, and air. Supported by an advanced transit system, we have become capable of delivering the orders within promised time.
scope :
selection of pvc membrane
installation of pvc membrane
the pvc membrane would be installed to cover structure and 1st layer of geotextile by thermal welding, adjacent pvc membrane shall be joined through double weld to ensure 100% waterproofing.
Mechanical Properties
Properties | Test Standard | Value |
---|---|---|
Specific Gravity | ASTM D 792 | 1.42 |
Thickness mm±10% | ASTM D 5199 | 2 MM |
Tensile Strength N/mm² | ASTM D 1599 | 18 |
Elongation in % | ASTM D 1599 | 300% |
Tear Resistance N/mm | ASTM D 10044 | 120 |
Punture Resistance KN | ASTM D 5602 | 2.5 |
Low Crack Resistance Shall not break, crack at -28Ëš C | ASTM D 1790 | Pass |
Chemical Properties
Change in Dimension | -- | None |
Chemical Resistance-28 days | -- | All Alkalis/Acid |
Change in Hardness | -- | -1 |
Backed with industrious professionals, we keep a stern check on the products to ensure that the range is commensurate to international norms. From mass to retail requirement fulfillment, we can do it all. Our organization has a widespread trading system to offer our patrons with the goods all year round and make scheduled delivery.
We follow strict payment procedures for the transactions that ensure that no third party is involved in this. You can rely on us and we will offer you to make payments online or offline. We are one of the esteemed names in the market situated in Vadodara(India) and offering the best deals.
Tunnels are built with a design life expectancy of over 100 years, which means that standards for tunnel construction must be high, particularly those involving sealing and waterproofing systems. A waterproofing system has the task of protecting the tunnel construction against damage from moisture or unintentional entry of water as well as the danger posed by aggressive water or soils and effects of chemicals. Thus, reliable functioning of waterproofing system is of particular significance in the case of traffic tunnels like railways, which are not accessible or stopped for subsequent repairs after seepages or leakages.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 20 days
geobags are manufacturing from woven or non-woven pp or polyester yarn and are used for slop protection , river bank embankment , soil erroision.
.Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3 to 4 Week (Min.)
Technical Specifications
Tensile Properties | Unit | Value |
---|---|---|
Hydraulic Conductivity | Cm/sec | 5 x 10-9 |
Bentonite | Kg /sqm | 3.60 (min) |
Bentonite Swell Index | Ml/2Kg | 24 |
Grab Strength | N/m | 600 |
GCL Index Flux | M3/m2/sec | 1 x 10-8 |
Roll Width(1) | M | 5.8 |
Roll Length(2) | M | 30 |
Clients can select any payment mode from our online or offline methods. Both of them are secure, hassle free, and ensure the fastest trade with the customers. We ensure complete contentment to the clients by delivering only flawless range of goods as we store the complete batch in our capacious warehousing unit that is well-structured and maintained.
We are capable of delivering the products in exceptional packaging material, this circumvents the loss during transit and thus, the product is delivered safely. We own a capacious and well structured warehousing unit wherein we store the entire lot away from diverse damaging factors such as moisture, rain, sunlight and various others.
If buyers are interested in attaining Nonwoven Geotextiles at the lowest prices, our organization is the products' established supplier. As we believe in client's supremacy, we decide the acceptable payment methods at the time of undertaking the agreement/contract. Moreover, our payment processing methods are secured.
NW700 is a nonwoven geotextile manufactured from high quality UV stabilized PP. The fibers are mechanically bonded through needlepunching process and also thermally bonded to form a strong, flexible and dimensionally stable fabric structure, with optimum pore sizes and high permeability.
NW700 is resistant to chemicals and biological degradation normally found in soils and is stabilized against degradation due to shorter exposure to ultraviolet radiation.
Technical Specificatons
Property | Unit | Astm-D | Specified Value |
---|---|---|---|
Weight | Gsm | D-5261 | 700 g/m2 min |
Thickness | mm | D-5199 | 4.5 mm min |
Tensile strength | N/5cm | D-4632 | 1200 N/5cm min |
Elongation @ break | % | D-4595 | 70% min |
Trapezoidal Tear | N | D-4533 | 750 |
Puncture Strength | N | D-4833 | 2100 N |
U V Resistance (% retained after 500 hrs) | % | -- | 70% |
Water Flow | 1/sqm/sec | D-4491 | 80 |
Resistance against acid and alkaline solutions, pH 2-13 | -- | -- | Loss of strength 10% max. |
A.O.S | μm | D-4751 | 100 |
Geotextile is permeable flexible membrane a fabric like continues sheet of woven / non woven.We are leading manufacturers of PVC Waterstop and are supplying our product to Govt-semiGovt, Infrastructure projects, Power plant, Refineries, Fertilizer plant, Civil contractors and other agencies. Our product is approved by SSNL, IGNP, NTPC, EIL and other consultant of repute.
PVC WATERSTOPS
JOINTING OF PVC WATERSTOPS
WATERSTOPS can be welded with a thermostatically controlled heating or blade welder which is able to adjust the heat up to 250°C for melting the PVC WATERSTOPS as following procedure: Cut Water stops ends straight and true using sharp knife or carbide tipped saw blade. Clean and lightly rough up the WATERSTOPS using wire brush. Preheat the blade welder to 250°C then apply on the cut surface of each end. Allow the PVC WATERSTOPS melt down about 4-5 mm. along each cut surface.
Take off the blade welder from the cut surface and hand press neatly each cut surface of WATERSTOPS together. Then check whether the splice was done properly or not by observing no hole, no distortion and, homogeneous. When the splice cooled, observe it carefully again to make sure proper splice, then the spliced WATERSTOPS are ready are ready to be installed. All center bulb waterstop must be aligned.
Major Applications For PVC Waterstops:
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3 to 4 Week (Min.)
Tunnels are built with a design life expectancy of over 100 years, which means that standards for tunnel construction must be high, particularly those involving sealing and waterproofing systems. A waterproofing system has the task of protecting the tunnel construction against damage from moisture or unintentional entry of water as well as the danger posed by aggressive water or soils and effects of chemicals. Thus, reliable functioning of waterproofing system is of particular significance in the case of traffic tunnels like railways, which are not accessible or stopped for subsequent repairs after seepages or leakages.
Being a quality conscious firm, we conduct strict quality checks for ensuring the product quality. We are a high-flying name when it comes to superlative LDPE Geomembrane Sheet!
Gabbion are manufacturing from PP rope or PVC Coated G.i wire filled with boulders to construct retaining wall , embankment , shore protection or other similar application.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3 to 4 Week (Min.)
Geonets are discernibly stiffer than geotextiles and have relatively large voids within the material.Methods of production vary but include extrusion, bonding or interlacing.
They can be produced from nearly all polymeric materials. These are used to strengthen fill materials in geotechnical applications. They provide increased shear strength between soil strata interfaces.
Their tensile strength can prevent or decrease the degree of differential settlement in some applications by transmitting the load over a broader area of soil thereby diminishing the vertical stress in the soil.
Geonets is a high-density polyethylene (HDPE) geonet. The geonet is made with 2 overcrossed strands at 60º, whose geometry create channels with a high flow capacity, also under pressure and at very low gradients.
Geonets Functions
DRAINAGE : Landfill capping, new landfills, water reservoirs, horizontal drainage in embankments and platforms of roads, railways, trams and other trafficked areas, retaining structures, bridges, foundations, basements, canals, cut and cover tunnels, tunnels and other underground structures, gardens and sport fields.
Additional Information:
Payment Terms : L/C, T/T,
Delivery Time : 3 to 4 Week (Min.)
Technical Specifications
CHARACTERISTICS | VALUE | UNIT | STANDARD |
---|---|---|---|
Geonet Drainage | - | - | - |
Polymer | High - density polyethylene (HDPE) | - | - |
Thickness at 20 kPa / 200 kPa | 6,2 / 5,5 | mm | EN 964 |
Thickness reduction due to creeping (1) | <3 | % | EN 1897 |
Mass per unit area | 740 | g/m2 | EN 965 |
Peak tensile strength MD / CD | 8,2 / 2,5 | kN/m | ISO 10319 |
Elongation at break, MD / CD | 20 / 90 | % | ISO 10319 |
Crushing Resistance | >1.000 | kPa | ASTM 1621 |
Flow capacity in their plane, MD | I/m·s | ISO 12958 (2) | |
i=1,0 | 0 = 20 kPa | 2,75 | - |
0 = 50 kPa | 2,42 | - | |
0 = 200 kPa | 1,95 | - | |
0 = 500 kPa | 1,10 | - | |
i=0,1 | 0 = 20 kPa | 0,63 | - |
0 = 50 kPa | 0,53 | - | |
0 = 200 kPa | 0,38 | - | |
0 = 500 kPa | 0,23 | - |
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3 to 4 Week (Min.)
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3 to 4 Week (Min.)