Delhi, India
Our Products
The RAD IQ FS200 is a food monitor system designed to monitor radiation levels in food sample being contained in a Marinelli beaker.The RAD IQ FS200 consists of a 3x3 inch NaI(Tl) detector and a built-in digital MCA mounted inside of 20 mm thick cylindrical lead shield. The affordable NaI based system satisfies most requirements and legislations for food industry.
Furthermore, the RAD IQ FS200 offers a standard software for complete quantitative and spectroscopic data analysis.
KEY FEATURES
| Detector | NaI (Tl) 3 x 3 inch | MCA | 32 bit RISC, ARM® Cortex-M3 |
| *Energy range | 20 ~ 2000 keV | Max. count rate | 150 kcps |
| Energy res. | 7% ± 1% FWHM @ 662 keV 137Cs | Data res. | 4096 channel |
| Network | USB 2.0(Full-speed) | **Shield | 20 mm lead shield |
| Weight | 62 Kg | Dimensions | 234(f) x 428(H) mm |
The RAD IQ BP 100 is designed to meet the requirements for covert search, detection, and identification with high sensitivity. The system is ideal for Homeland Security, First Responder, and Radiological survey applications.
The Backpack unit includes a 3x3 inch NaI(Tl) detector and two 2" diameter by 15" long neutron detection tubes (BF3 or He3). The standard configuration places the detector and electronics in a water and shock resistant reinforced case fitted with a backpack harness. Other configurations areavailable according to specific requirements.
Data acquisition is provided via Blue-Tooth to the PAD unit. The standard PAD unit is the Samsung Galaxy Note. The PAD display provides the user with easy to read information providing assessment of current radiological levels including personal safety and radionuclide identification. Upon completion of a survey the data is downloaded from the PAD unit to the PC. The optional GPS unit provides the necessary data for radiation mapping.
KEY FEATURESGamma-ray Spectroscopy for Specific Nuclide Identification
Neutron Detection
Bluetooth Communication to PAD unit for Covert Operation
Up to 24 hour operation on a single battery charge
Automatic System Calibration and Stabilisation
Database protocol for log files and alarm events
Water and Shock Resistant
Small, Convenient, Form Factor and light weight
APPLICATIONSHomeland Security
Emergency Responder
Radiological Area Mapping
Geological Radiation Survey
Safeguard and nuclear security
We have available Plastic optical fibers for the research community. We can supply fibers of all makes. These fibers can be used for probing as well as detection. Custom enquiries are welcome. We can supply the optical fiber with a variety of polishing requirements including optically polished.
Geebee can also supply plastic optical fiber for the telecom industry for communication. Contact us today for your requirement.
The RAD IQ WBC is a whole body counter especially designed to examine radiation intake of people those who are exposed by radiation.Its open-style design is unique in the industry and make the examination process more convenient to children and pregnant woman. In addition, adjustable detector height feature enables uniform efficiency and optimal measurement regardless of the height of people.
The patent pending segmented and collimated detector technology not only enhances signal to noise ratio at the region of interest on the body but also lightens shielding requirement that makes the system to maintain its light weight and openness.Most of all, the light weight and small foot-print feature has great advantage in installing the RAD IQ WBC system in small space including a vehicle.
Children and pregnant woman friendly open designSegmented and collimated eight 3x3 inch NaI(Tl) detectorsSmall foot-print and Light weightAdjustable detector height depending on object heightOne minute measurement time for typical operationLaser guided detector positioning
APPLICATIONRadiation intake investigationIn-vivo dosimetryReactor personnel safety
| Detector | Segmented and collimated NaI(Tl) (3x3 inch, 8ea.) | Shielding | 30mm lead (shadow shielding) |
| Detector FOV coverage | 100 x 100 cm | Detector travel length | 40 cm |
| Foot print | 100 x 100 cm (200 cm height) | Weight | Total: 1,300 kg Heaviest item: 33 kg |
| Typical MDA | 150 Bq (Cs134), 200 Bq (Cs137) |
Power | 110 - 220 V AC (50 or 60 Hz) |
| Energy range | 200 - 2,000 keV | Energy resolution | < 9% @ 662 keV (Cs137) |
| Operating Temp. Requirement | Stable within ± 5 °C | Options | Calibration phantom |
The RAD IQ S100 is an advanced spectroscopic portal (ASP) system intended for portal, vehicle, pedestrian orluggage monitoring.An affordable solution to bulky and expensive portal monitors, the RAD IQ S100 features an integrated digitalmulti - channel analyzer (MCA) for radioisotope identification.An intelligent isotope identification algorithm makes it possible to identify radioisotopes of extremely low radioactivity.The RAD IQ S100 includes an Ethernet interface that provides remote, real-time, and 24/7 monitoring.When a radiation event occurs, local alarms are triggered, the date and time are recorded, the location of the area isnoted, the event is photographed, the radioactive material is identified, a isotope spectrum is recorded, and remotenotification can occur.Furthermore, its flexible mounting feature offers effortless installation at any places such as doorways, driveways orconveyor systems.
KEY FEATURESIntelligent isotope identification algorithm.Remote, real-time and 24/7 monitoring.Multiple units can be managed from central control station.External visual/acoustic alarm unit.PoE (Power of Ethernet) and integrated digital MCA.Automatic system calibration.Database log files for alarm events.Effortless installation with brackets or tripods.Lead collimation with adjustable FOV angle for effective background suppression.
APPLICATIONSVehicle monitoringPedestrian monitoringShipping/receiving dock monitoringSecurity check point at airportLuggage inspection
| Detector | NaI(Tl) 2 x 2 or 2 x 3 inch | Operating temp. | 5°F(-15°C) to 122°F(50°C) |
| Energy range | 20 ~ 2000 keV | Relay output | 12 V on/off (user programmable) |
| MCA | 32 bit RISC, ARM® Cortex-M3 | Collimation | 10 mm or 20 mm lead |
| Energy res. | 7% ± 1% FWHM @ 662 keV Cs137 | Power | PoE or 12 VDC(switchable) |
| Netwrok | RJ-45 Ethernet | Minimum dose for isotope ID 3) |
24 x 10-12 Gy |
| Weight | 12.5 Kg or 23 Kg | Dimensions | 190(W) x 245(H) x 570(D) mm |
| Calibration | Automatic or Manual(Cs137) | Optional Items | Network cam, External acoustic & visual alarm |
Geebee International can provide 25 mm and 40 mm focussed image intensifiers along with a range of open detector systems. With this a two dimensional image of electrons, X ray, UV radiation and ionized particles is possible. They are suuitable for the 10 eV - 1000 eV range.
Their applications include electron detection, X Ray detection, UV, TOF measurements, Particle beam adjustments and mass spectrometry.
The MCP can be coated with CuI, MgO, MgF2, CsI
These intensifiers can be used under low light conditions and for photon counting. Further they are useful in UV imaging and and for low light imaging.The image intensifiers are offered with 25 or 40 mm active diameter. Various screens such as P43, P46 or P47 can be used along with a glass or fiber optic window. we can provide an internal or seperate power supply
