GENESISS ENGINEERS

Pimple, Pune, Maharashtra

• Equipped with 100 N-m torque cell which provides higher accuracy of torque.
• Self-aligned gripping device for any specimen.
• PLC based instrumentation to measure.
• Graphical data output.
• Safety interlock for overload.

• Suitable for testing of cement / concrete test blocks.
• This machine operates in hydraulic system.
• Compact machine design requires minimum space.
• Direct display of Compressive strength value of test on digital panel.
• Easy to operate.
• Easy for installation & maintenance.

• This is fully automatic Impact Testing Machine from loading of the sample to the test result.
• It is designed for conducting Izod, Charpy Test.
• Pendulum has two starting position, upper one for Charpy and lower one for Izod.

• Precision stepper motor and drive.
• PLC based instrumentation to measure.
• Provision for Load Cell interchangeability.
• Safety interlock for overload.

• Precision gearboxand drive.
• PLC based instrumentation to measure.
• Provision for Load Cell interchangeability.
• Safety interlock for overload.

• Front panel touchscreen system.
• Online graph of Load vs Displacement directly on screen.
• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.
• Built-in USB interface.

• Machine provided with electronic digital display for Load and Elongation.
• Online Graph on PC (Optional).
• Printer Interface with results & load displacement curve.
• This model contains touch screen.

• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.
• Built-in USB interface.

• Front panel touchscreen system.
• Online graph of load vs Displacement directly on screen.
• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.
• Built-in USB interface.

• Front panel touchscreen system.
• Online graph of load vs Displacement directly on screen.
• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.

• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.
• Built-in USB interface.

• Machine provided with electronic digital display for Load and Elongation.
• Online Graph on PC (Optional).
• Printer Interface with results & load displacement curve.
• All other facilities mentioned under Electro-Mechanical Model.
• Other available models: Computerized/Servo Controlled.

• Built in projection screen to get accurate results.
• Motorized control valve.
• Straining at variable speeds.
• User friendly software package.
• RS 232 Serial Port for PC connection.

• Panel/PC Controlled.
• Digital display for load and elongation.
• Variety of Tests - Tensile, Compression, Cyclic, Bending, Shear, Low cycle Fatigue, Fracture.
• Printer Interface with results & load displacement curve.
• Various models - Capacity ranging from 100N to 100 kN.
• Loading accuracy well within 1%.

• Variety of tests - Tension, Compression & Transverse.
• Continous roll autographic 'Load Elongation' recorder.
• Various Models-Max. capacity reading from 100kN to 1000kN.
• Optional accessories include load- stablizer, attachments for Brinell Test, Bend Test & Shear test.
• Loading accuracy well within 1%

• Straining at variable speeds to suit a wide range of materials
• Various models - Max capacity from 500kN to 5000 kN.
• Wide range of standard & special accessories including load stabilizer.
• Loading accuracy well within 1 % .

• Front Panel membrane type key board for test setup.
• 7 segment digital display of load displacement/extension.
• Printer port interface.
• Serial port communication with PC.
• Storage of important parameters such as peak load & maximum dispalcement after test.
• Preload selection to take care of initial slippage.
• Optional real time graph & PC software.

• Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.
• Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.
• The accuracy of torque indication is 1% of the true torque.

• Straining at variable speeds to suit wide range of materials.
• Panel & PC graph enables to study the behavior of material.
• Rigid fix crosshead straining unit.
• Simple controls for ease of operation.

• Completely computer controlled with electronics outside PC.
• Variety of Tests - Tensile, Compression, Cyclic, Bending, Shear, Low cycle Fatigue, Fracture.
• Various models - Capacity ranging from 100N to 100 kN.

• Large rectangular dial with inner scale for Izod and outer scale for charpy test, in Joules.
• The pendulum is supported separately in two positions by a common latching tube.
• Front guard provided for safety of operator.

• Loading with screw driven mechanism
• Equipped with latest, state of the art MICROCONTROLLER based measuring system
• Optional RS - 232 port for PC interface.
• Equipped with PC based measuring system with "Click and Go" type Windows based software package
• Can be upgraded without any major hardware change

Model - UNITEK - 97050

• Front panel touchscreen system.
• Online graph of Load vs Displacement directly on screen.
• Precision AC stepper motor & drive with ball lead screw.
• PLC & HMI based systems.
• Provision for load cell interchangeability.
• Facility for mounting different load cells.
• Built-in USB interface.