Genist Technocracy Pvt. Ltd.

Barwala Road, Dera Bassi, Punjab

We provide most versatile and highly reliable low temperature BOD Incubator to make biochemical oxygen demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc. The BOD Incubator that we provide features robust construction, in which, the outer cabinet is made of M.S. Sheet, duly pre-treated & finished with epoxy powder coated paint for a lasting finish. The inner chamber of the BOD Incubator is made of highly polished stainless steel. Our clients can avail the BOD Incubator at very reasonable price.

Applications : Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.

Construction and Salient Features

• Robust Construction
• Outer cabinet is made of M.S. Sheet, duly pre treated & finished with epoxy powder coated paint for lasting finish
• Inner chamber is made of highly polished stainless steel.
• It has provision for allowing wide range of shelf positions & spacing.
• SS trays are also provided.
• The outer chamber may also be provided of mat finished Stainless Steel.
• Chamber is duly insulated to minimize heat loss.
• Two doors are provided. Outer door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss.
• Door is provided with lock and key.
• Inner door is made of transparent acrylic/ glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss.
• The heart of the GTPL B.O.D. Incubator is the excellent and reliable solid state temperature controller cumindicator digital display, range from 5^oC to 50^oC ± 0.5^oC.
• Hermetically sealed, Dan Foss / Emerson Copeland high performance compressor works efficiently to lower the inside chamber temperature.
• Heating elements are placed in the path of moving air duly insulated from the body.
• Cooling coils also lie in the air circulation path.
• Air is circulated by a double shaft self-cooled, blower to keep the uniform temp.
• Through out the inner chamber
• A safety thermostat is provided, which switches off the heaters in the event of failure of the normal temp. control system to protect the specimens from excessive heat.
• A highly insulated CFC free PUF System is provided to avoid loss of energy.
• All controls and circuitry are housed at the top of the incubator and therefore protected from spillage.
• Separate indicator lamps for mains, heating and cooling are fitted.
• Temperature setting is by finger touch fine and coarse for the user to set any desired temp.
• A Voltmeter is provided on the panel to read the incoming voltage. Fitted with automatic built in stabilize

Incubators are sturdy, with double walled construction and complete inner chamber that is made of anodized aluminum or highly polished stainless steel. Outer chamber of Bacteriological Incubator is made of mild steel sheet, finished with powder coated paint and the 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber of the Bacteriological Incubator is fabricated with ribs for adjusting shelves to convenient height. It is supplied with two or three removable shelves that are made of fully anodized aluminum sheet or polished stainless steel sheet as per chamber. Door is insulated & fitted with heavy hinges and has double glass window, which facilitate inspection of samples without opening the door. Heating elements, made of high grade imported ni-chrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.

ConstructionBacteriological Incubators is perfect for different experiments in microbiology, Institutes, industries, R&D labs, and all that. Bacteriological Incubators outer body made of mild steel sheet duly powder coated. Inner chamber and perforated trays made of stainless steel (SS-304). Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat dissipation

Temperature ControlTemperature is controlled by imported capillary type thermostat from ambient to 80^°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.

Ventilation : Air ventilators are provided on both sides at top to flue away any gas or fumes.

Control PanelThe equipment is provided with a panel having a thermostat control knob, On/Off switch and two pilot lamps. Power Requirement: – Supplied with cord and plug suitable to operate on 220 V single phase, 50 Hz, AC supply.

Optional Accessories

• Timer
• Air Circulating Fan
• Digital Indicator in lieu of L-shaped thermometer
• Digital Indicator – cum – Controller Electronic in lieu of L-shaped thermometer & thermostat
• Micro processor based PID Temp. Controller-cum-indicator in lieu of Thermostat & L-shaped thermometer