Genist Technocracy Pvt Lt...

Material : Stainless steel and suitable for materials like Fermentation media, Buffers, reagents, glassware, plastic wares, and autoclavable Bioreactor.

Door

• Door is fabricated from 304 Maximum operator safety.
• Process-lock to prevent the opening of the door during the process.
• Process-lock to prevent the opening of the door after successful completion of the cycle.

Insulation

The sterilization chamber is insulated with a minimum of 50 mm thick R. B Glass Wool, which is held in place by an outer cover of SS 304. A 0.3- micron vacuum break. Air filter provided on the sterile side for pressure equalization after vacuum creation.

Piping Package

All proess piping in contact with the chamber is fabricated from SS 304 with argon welding. All connections and fittings used are sanitary tri-clamp with silicone seals. All non-contact piping is fabricated from SS 304 with argon welding. All drain lines and exhausts are connected to a drain manifold. The pipelines should have a 2 % slope for full draining to prevent contamination. All pneumatic lines shall be polyurethane with aluminum die-cast connectors.

Valve Package

The process valves in contact with the chamber should be SS 304 contact parts with Teflon seat and tri-clamp connections. All automatic valves are to be pneumatically actuated angle valves. The valves are to be actuated by instrument air controlled via solenoid valves.

Steam Accessories

The jacket and chamber are provided with an over-pressure safety valve. The chamber is provided with a steam trap. The inside of the chamber and doors are to be finished to a surface finish better than the 0.8 Ra value. All other noncontact parts are to be polished to a surface finish better than 180 grit.

Process Management System

The sterilizer is designed to perform a wide range of tests and production programs to meet the latest regulatory requirements.

Temperature and Pressure Sensors

Two sensors are provided, one inside the chamber and one at the drain outlet. For accurate process control and recording, all sensors are connected to the PLC and Recorder. The system must have a least count of 0.10 C. A pressure transmitter to be connected to the chamber. The system should have a pressure least count of 0.002 bars. All utility lines are provided with a pressure switch for generating an alarm in case of utility failure.

Electrical Switchgear

The control cabinet is provided with a main isolator for the three-phase supply and a separate switch for the control supply. The fascia of the control panel is provided with indication LEDs and switches for operation.

Process Recording

All the switchgear: – Schneider do matrix data printer for recording, date, time, process parameters, process status, etc., shall be provided alarms with the machine.

Control Panel

The system is provided with a user-friendly HMI as a front-end user interface. Following minimum attributes shall be provided. RS 232 port for data communication. In-built Real-Time Clock with date and time function.

Safety

The process management system shall be provided with a series of safety and alarm features are as follows:

• Cycle over.
• Too long time to create a vacuum.
• Pressure Achieve.
• Utility Failure Alarm.
• No sharp corners should be present.
• No wielding edges.
• Low water level.
• Jacket pressure over.
• Chamber pressure over.

Application

Blood Bank Refrigerators are available in various capacities, designed to fit a variety of space and storage requirements. The refrigerators are equipped with heavy-duty compressors to maintain a virtual operation temperature of 4.0°C Superior refrigeration technology and precise temperature control to ensures reliable blood storage.

Salient Features

• Blood bank refrigerator with digital temperature controller (Deluxe Model) blood bank refrigerators are the most versatile unit for blood bank, specially designed for this purpose.
• It is available in various capacities for storing the blood bags/bottles in an automatically controlled temperature of 2°C to 6°C. Temperature ranges of 2-6°C are also maintained.
• The height of the equipment could also be adjusted. Forced air circulation ensures a uniform temperature.
• We offer a comprehensive range of high precision and superior quality blood bank equipment that helps in the entire process of blood collection.
• The range is actually very comprehensive and includes all the instruments and equipment that are required in the blood collection process like, blood bank refrigerator, tube sealer manual, donor couch, tube sealer electronic, blood collection monitor and plasma extractor come with Proper alarm system, a door opened alarm is one of the features.
• Proper lighting, especially of the inside chamber’s facilities, are provided.

Construction

• External body is made STAINLESS STEEL sheet, duly pre-treated and is finished with a powder-coated paint for a lasting finish.
• Cast Wheels provided for easy mobility. The inner chamber is made of high-quality stainless steel, highly polished STAINLESS STEEL. Trays are provided.
• For accommodating blood bottles or blood bags. Cooling System: – Cooling is achieved by a highly efficient Refrigeration system using a hermetically sealed compressor and other Parts.
• Two doors are provided Inner door is of clean acrylic sheet glass for easy viewing inside the chamber.
• Outer door is duly insulated for proper sealing from external environment and is lockable.

Temperature Control

The temperature inside the chamber is maintained automatically by electronic digital temp. Controller-cum-indicator. An audiovisual alarm system is incorporated with battery backup in case of mains failure or temperature variation beyond permitted Tolerance or door opening to prevent the spoilage of stored blood Bags. Inside illumination is provided for visibility of bags kept Inside the chamber.

• Control Panel : All controls such as digital temperature Controller-cum indicator, mains switches, indicating lights, battery Check switch, Audio visual alarm, & voltmeter are easily accessible.
• Power Supply : Suitable to work on 220 V, 50Hz, AC supply.
• Optional Accessories : Weekly temperature Voltage stabilizer – 3 KVA / 4 KVA

General Features

• Solid-state electronic temperature controller; pre-set for +4°C operation.
• Microprocessor Tl 00-1 alarm/monitor system with digital temperature display resolution to 0.1°C.
• Three on-board test functions to verify system readiness.
• Built-in electronic 7-day circular chart temperature recorder, standard, for a permanent record of operating temperature
• Dual air circulating fans for maximum temperature uniformity throughout the cabinet.
• Fluorescent interior lighting with on/off switch.