Glaymax Paints Pvt. Ltd.

Govind Puram, Ghaziabad, Uttar Pradesh

Glaymax Premium GP Thinner is a specially designed thinner with Pure MTO to improve brush ability and floability of oil and alkyd based products. It improves paint consistency and allows paint to acquire optimum film characteristics. It can be used as a cleaner for oil dirt and grease of metal surface before painting.

TYPICAL USES:As a Paint Thinner : Ensure the surface to be painted is clean, dry and prepared in accordance with the paint manufacturer's directions. The ratio of thinner to paint should be in accordance with paint manufacturer's guidelines. All equipment used in mixing and applying the mixturer should be clean and dry. While mixing paint and thinner together use accurate measures. Add A the thinner to the paint slowly and stir well. Mix thoroughly before application. Apply with a spray gun or brush.
As a Paint Remover: To strip paint from surfaces or to remove over spray (other than painted surfaces) use a tightly woven, relatively non-absorbent cloth. Wet with Glaymax GP Thinner and wipe the surface vigorously until the paint has been removed. Cleaning equipment after use: After applying enomel paint, it is recommended that brushes and spray equipment are cleaned with Glaymax GP Thinner.

SAFETY & CAUTION:

•  Keep container tightly closed to prevent evaporation. Stir well before use.
• Strain material through fine cloth before use.
• Hazard class flammable.
• Keep out of reach of children and away from food.
• In case of contact with eyes, wash immediately with water and seek medical advice.
• Mixed materials should be used within 4-6 hours.

Glaymax®MARUTI THINNER is a vital substance in oil-based paint applications. It reduces paint thickness, stickiness, and tackiness, enhancing application ease.

Safety Precautions: Wear appropriate safety gear: gloves, goggles, and a respirator to avoid fume inhalation, ingestion, or skin absorption. Keep away fromignition sources; ensure proper ventilation indoors.

Key Uses:

• Preparation and Cleaning: Before applying polish or varnish to wood, it's crucial to ensure the surface is clean and free from dust, dirt, oils, and any previous residues. NC thinner is used to clean and degrease the wood surface effectively, providing a clean base for the polish or varnish to adhere to.
• Thinning Varnish and Lacquer: NC thinner is often used to dilute nitrocellulose-based varnishes and lacquers to achieve the desired consistency for application. This helps in achieving smoother and more even coats of varnish or lacquer on the wood surface.
• Adjusting Drying Time: By varying the ratio of NC thinner to varnish or lacquer, you can control the drying time of the finish. Adding more thinner accelerates drying, while less can slow it down, allowing for adjustments based on temperature and humidity conditions.
• Enhancing Flow and Leveling: NC thinner improves the flow and leveling of varnishes and lacquers on wood surfaces. This helps in achieving a uniform and professional-looking finish, reducing the appearance of brush marks or uneven application