Hoshiarpur, Punjab, India
Verified
Add Review
Our Products
Being an illustrious Supplier of busduct, we endeavor to achieve 100% customer satisfaction. We are acknowledged as a trustworthy name based in Hoshiarpur(India) and offering products to diverse Hoshiarpur(India)s.
Only high quality raw materials have been used for the production of our products as we comply with all quality standards. We use quality-approved raw materials as inputs for the production of our finished goods. The selection procedure of the raw materials is conducted by our expert quality auditors.
Additional Information:
Packaging Details : As per Client Requirement
We offer a variety of payment methods to our customers so that they can pay as per their convenience while focusing on the core trade. Being a quality driven firm, we source the raw material from the certified vendors only who assure us for the quality and reliability of the material.
Ease in modification of logic, reduced size, means of remote communications and advances in the technology have made PLC Automation Control Panels an edge over conventional relay based systems. Control Systems Engineers has provided PLC based Panels from PLC of Allen Bradley, Siemens, Modicon, GE Fanuc. From small I/O application to the complex I/O systems are provided by the Control Systems Engineers. Control Systems Engineers have developed communication software's for remote communication of the PLC Panels in various different protocols. With PLC based Panels HMI/MMI are provided to provide the operator various messages and controls of the process plants touch screen MMI are provided. To effective control of the system.
the simplest control in hvac system is cycling or on/off control to meet part load conditions. If building only needs half the energy that the system is designed to deliver, the system runs for about ten minutes, turns off for ten minutes, and then cycles on again. As the building load increases, the system runs longer and its off period is shorter.
one problem faced by this type of control is short-cycling which keeps the system operating at the inefficient condition and wears the component quickly. A furnace or air-conditioner takes several minutes before reaching "steady-state" performance. "well, " you say, "why not just lengthen the time between starts to avoid short-cycling?" this is possible but at a cost of some discomfort for short time. The longer the time between cycles, the wider the temperature swings in the space.trying to find a compromise that allows adequate comfort without excessive wear on the equipment is modulation or proportional control. Under this concept, if a building is calling for half the rated capacity of the chiller, the chilled water is supplied at half the rate or in case of heating furnace; fuel is fed to the furnace at half the design rate: the energy delivery is proportional to the energy demand. While this system is better than cycling, it also has its problems. Equipment has a limited turn-down ratio. A furnace with a 5:1 turn-down ratio can only be operated above 20% of rated capacity. If the building demand is lower than that, cycling would still have to be used.
an alternate method of control under part-load conditions is staging. Several small units (e.g., four units at 25% each) are installed instead of one large unit. When conditions call for half the design capacity, only two units operate. At 60% load, two units are base-loaded (run continuously), and a third unit swings (is either cycled or modulated) as needed. To prevent excessive wear, sequencing is often used to periodically change the unit being cycled. To continue our example at 60% load: assume units 1 and 2 are base-loaded, and unit 3 has just cycled on. When the cycling portion of the load is satisfied, unit 1 cycle off, and units 2 and 3 become base loaded. When more capacity is needed, unit 4 cycles on, and so on.
where are hvac controls required?
the hvac control system is typically distributed across three areas:
1) the hvac equipment and their controls located in the main mechanical room. Equipment includes chillers, boiler, hot water generator, heat exchangers, pumps etc.
2) the weather maker or the “air handling units (ahus)” may heat, cool, humidify, dehumidify, ventilate, or filter the air and then distribute that air to a section of the building. Ahus are available in various configurations and can be placed in a dedicated room called secondary equipment room or may be located in an open area such as roof top air-handling units.
3) the individual room controls depending on the hvac system design. The equipment includes fan coil units, variable air volume systems, terminal reheat, unit ventilators, exhausters, zone temperature/humidistat devices etc.
benefits of a control system
controls are required for one or more of the following reasons:
1) maintain thermal comfort conditions
2) maintain optimum indoor air quality
3) reduce energy use
4) safe plant operation
5) to reduce manpower costs
6) identify maintenance problems
7) efficient plant operation to match the load
8) monitoring system performance
We make use of the finest grade raw material that reflects in the finished products. Also, we make sure that it is procured from the trusted places only. We secure our products with lightweight, non-toxic, and superior grade packages. The packaging is done using the latest technologies and guarantees full protection to the product.
a fire control panel is a component that offers control through a fire alarm or notification system. Throughout the building, sensors are installed. These sensors redirect information to this control panel. They include environmental changes that could detect the presence of a fire. The panel receives notifications for potential operational issues with equipment that could cause a fire
Only qualitative raw material can result top-notch product range. Thus, we procure it from dependable names in the industry and that too after complete quality confirmation. We have invested a huge amount in the automated warehousing system that is sprawling over a large area. We make certain that the wide array of product range we offer is strictly packed and kept safe till the final delivery.
We are the manufacturers of 11KV Vacuum Circuit Breaker Panel that is known for high performance, rigid construction and longer service life. The panel is user-friendly and easy to operate. The panel is high in performance, provide accurate results and require less maintenance. Its reliable operating mechanism also ensure safety of the user.
11/33KV Vacuum Circuit Breaker outdoor Panel that is used for the protection of transformer. VCB panels are precisely designed following strict industry parameters and are appreciated for features like superior quality and cost effectiveness. VCB Panels are also available from original equipment manufacturers (OEM) to incorporate installations or for use in repair, retrofit and upgrade projects
The company has uplifted its reputation in the market by offering fine quality Drive panel at nominal prices. As a trusted name, we conduct different quality tests at all stages to make sure that our offered range is defect free.
APFC Panel has microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. Modern power networks consists of wide variety of electrical and power electronics loads, in case of such varying loads, the power factor also varies as a function of the load requirements .So it is practically difficult to maintain consistent power factor by the use of fixed compensation i.e. fixed capacitors which shall need to be manually switched to suit the variations of the load. It can lead to situations where the installation can have a low power factor leading to higher demand charges and levy of power factor penalties.
Details :
We are the manufacturers of 11KV Vacuum Circuit Breaker Panel that is known for high performance, rigid construction and longer service life. The panel is user-friendly and easy to operate. The panel is high in performance, provide accurate results and require less maintenance. Its reliable operating mechanism also ensure safety of the user.
Being an illustrious Supplier of busduct, we endeavor to achieve 100% customer satisfaction. We are acknowledged as a trustworthy name based in Hoshiarpur(India) and offering products to diverse Hoshiarpur(India)s.
