L-Boltsare used to attach a plate member to a concrete ormasonry foundation, provide anchorage for lightweight post bases, and for general anchorage to concrete. They are packaged withnutsand cutwashers. Many building codes require that additional bearing plates be used with the bolt in high wind and high seismic areas; consult local codes.

Eye boltshave a variety of uses, one of the most common being in the rigging industry, where a steel eye bolt is ideal as an anchor point for many rigging applications. There are several guidelines to remember when using aneye boltfor rigging, anchoring, pulling, pushing or hoisting. -Regular rigging eyebolts should be used for straight line pulls only. For angular lifts, shoulder eye bolts are the better choice.-Always inspect athreadedeye bolt prior to use and make sure the threads and receiving holes are clean.-Never use an anchor eyebolt if the shank or eye has been bent, elongated, or deformed.-Thethreadedpart of eye bolts must protrude through the load so the nut is allowed full engagement of threading. If an eyeboltprotrudes too far through the load, you may need to shim the bolt with washers between the nut and the load prior to putting thenuton.

J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion. Type 304 Stainless Steel, carbonstainless steel (SCM435.40CR.45H)Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!Type: OSC Standard: DIN Size: M2.5-8 Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet

 

Uses: These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion. Material: Type 304 Stainless Steel, carbon/stainless steel (SCM435.40CR.45H) Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!  Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet

U-boltsare common bolts that are used for building construction and/or vehicle suspension like leaf springs. Considered one of the major parts of your leaf spring installation, u-bolts will provide a permanent tie between the spring leaves. When describing what au-boltis, one can just look at the shape. With a letter U shape, theboltfeatures twothreaded arms. The primary use of the U-bolt is to connect the axle to the leaf spring pack within the suspension system.

J-shaped boltthat can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

We offerHex Head Bolts& MachineryFastenersthat are widely used in automobile, agriculture and electronics industries. These are specially designed keeping in mind the international quality standards and available in various lengths & sizes. Our range of Metal Bolts & MachineryFastenersis appreciated for their high strength, durability & functionality. Keeping in mind the drawings, specifications, designs, samples and requirements laid down by our clients, we also hold expertise in providing Bolt Fasteners in standardized as well as non standardized forms from cold forging & bar turning.
Specifications :
Threads:ISO metric (MM Threads)
BA threads
BSW threads (Inches)
UNC & UNF threads
Material:Carbon Steel
Alloy steel, Stainless Steel
Finish:Plain Finish, Zinc plated
Yellow plated
Hot Dipped Galvanized

L-Boltsare used to attach a plate member to a concrete ormasonry foundation, provide anchorage for lightweight post bases, and for general anchorage to concrete. They are packaged withnutsand cutwashers. Many building codes require that additional bearing plates be used with the bolt in high wind and high seismic areas; consult local codes.

Eye boltshave a variety of uses, one of the most common being in the rigging industry, where a steel eye bolt is ideal as an anchor point for many rigging applications. There are several guidelines to remember when using aneye boltfor rigging, anchoring, pulling, pushing or hoisting. -Regular rigging eyebolts should be used for straight line pulls only. For angular lifts, shoulder eye bolts are the better choice.-Always inspect athreadedeye bolt prior to use and make sure the threads and receiving holes are clean.-Never use an anchor eyebolt if the shank or eye has been bent, elongated, or deformed.-Thethreadedpart of eye bolts must protrude through the load so the nut is allowed full engagement of threading. If an eyeboltprotrudes too far through the load, you may need to shim the bolt with washers between the nut and the load prior to putting thenuton.

J-shaped bolt that can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion. Type 304 Stainless Steel, carbonstainless steel (SCM435.40CR.45H)Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!Type: OSC Standard: DIN Size: M2.5-8 Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet

 

Uses: These hook bolts are designed for marine and other outdoor projects. Hooks are resistant to atmospheric corrosion. Material: Type 304 Stainless Steel, carbon/stainless steel (SCM435.40CR.45H) Do NOT use for overhead lifting, support of human weight, athletic or playground equipment. Inspect frequently!  Surface finish: plain, black oxide, zinc-plated, hot-dipped galvanized Packing: plastic bag in box, boxes in per carton, pallet

U-boltsare common bolts that are used for building construction and/or vehicle suspension like leaf springs. Considered one of the major parts of your leaf spring installation, u-bolts will provide a permanent tie between the spring leaves. When describing what au-boltis, one can just look at the shape. With a letter U shape, theboltfeatures twothreaded arms. The primary use of the U-bolt is to connect the axle to the leaf spring pack within the suspension system.

J-shaped boltthat can be used in a variety of applications and are made from several different materials. They are most commonly used to suspend electrical wiring and sheet metal from wooden structures as well as in the furniture industry to hold springs.

We offerHex Head Bolts& MachineryFastenersthat are widely used in automobile, agriculture and electronics industries. These are specially designed keeping in mind the international quality standards and available in various lengths & sizes. Our range of Metal Bolts & MachineryFastenersis appreciated for their high strength, durability & functionality. Keeping in mind the drawings, specifications, designs, samples and requirements laid down by our clients, we also hold expertise in providing Bolt Fasteners in standardized as well as non standardized forms from cold forging & bar turning.
Specifications :
Threads:ISO metric (MM Threads)
BA threads
BSW threads (Inches)
UNC & UNF threads
Material:Carbon Steel
Alloy steel, Stainless Steel
Finish:Plain Finish, Zinc plated
Yellow plated
Hot Dipped Galvanized