Our Products
Global Engineering Exports are the manufacturer of following strut channel accessories: |
MATERIALS:Low Carbon SteelT304/T316 Stainless | FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated | Sizes Available: As Above |
Through Bolt:Suitable for all App. in un cracked concrete. The arrow through bolt has been developed in response to the changing demands of the market
in terms of product approval, levels, ease of fixing and product quality. This is a single ring with large wedges with three slits provided with projection to grip the concrete. This is fitted on specially designed tapered cone to grip the concrete. A reliable hold is obtained due to large wedges which expand in three directions. Suitable for Non-Cracked Concrete. Our product range includes Anchor Fasteners, Anchor Bolts, ExpansionFasteners, Expansion Bolts, Drop in Anchors, Through Bolts, Masonry Anchor Bolt etc.
Available in
Material Mild steel white Zinc Passivated 5 microns
Material Carbon Steel (Cold forged) yellow with SS304 clip
Stainless steel AISI-304-A2/AISI-316-A4
Cadmium plating on Mild steel
Applications
Structural connections through fixing bracketing. Support angle, cladding restraint steel holding down, Stadium seating, raking, light structures, machinery, safety fences and crashed barriers, steel constructions, railings, consoles, ladders cable trays, machines, staircases, gates, facades, window elements. Fixing back industrial doors, wall, handrails, fabricated stairways, curtain walling system, corrosive environments, stainless steel for ultimate protection in marine, sewage, water treatment, food processing polluted industrial atmosphere and decorative applications and many more applications etc.
Anchor Expansion Fasteners
We offer a wide array ofAnchor Expansion Fastenersto choose from. Thesefastenersare available in various designs and sizes depending on the area of application.Fastenersare mostly used in heavy machinery installation and thus need to be highly resistant to corrosion. Anchor fasteners also need high strength capabilities to facilitate the installation of heavy machinery.
|
||||||||||||||||||||||||||||||||||||||||||
Global Engineering Exports are the manufacturer of high quality Strut Channel Cantilever Arms, Cantilever ArmsSlotted that is precisely designed to provide better gripping power with Strut Channels.
Channel nutsare manufactured from mild steel channels, and after machining operations are completed, they are case hardened, assuring positive biting action into the in turned edge of the Unistrut channel.
MATERIALS:Low Carbon SteelT304/T316 Stainless | FINISHES:Plain/OilClear Zinc PlatedYellow Zinc PlatedHot Dip GalvanizedBlack OxideNickel Plated | Sizes Available: As per above table |
Length | x Width |
x Height |
x Thick | ||
150 MM | 41 MM | 41 MM | 2.5 MM | HDG | MS |
300 MM | 41 MM | 41 MM | 2.5 MM | HDG | MS |
450 MM | 41 MM | 41 MM | 2.5 MM | HDG | MS |
600 MM | 41 MM | 41 MM | 2.5 MM | HDG | MS |
750 MM | 41 MM | 41 MM | 2.5 MM | HDG | MS |
6 " | 1 - 5/8 " | 1 - 5/8 " | 12 G | BZP. | MS |
12 " | 1 - 5/8 " | 1 - 5/8 " | 12 G | BZP. | MS |
18 " | 1 - 5/8 " | 1 - 5/8 " | 12 G | BZP. | MS |
24 " | 1 - 5/8 " | 1 - 5/8 " | 12 G | BZP. | MS |
30 " | 1 - 5/8 " | 1 - 5/8 " | 12 G | BZP. | MS |
Din:DIN 125 / DIN 126 / DIN 433 / DIN 433 / DIN 6902 / DIN 6903 / DIN 6340 / DIN 7349 / DIN 7989 / DIN 9021 / USS Flat washers / SAEFlat washers Finish:ZINK PLATED STAINLESS STEELSteel is zinc plated for moderate protection against rust.STEEL GRADE 8 WITH YELLOW ZINCMade from medium carbon alloy steel and tempered with yellow zinc plating. Best for applications where high strength and hardness is required.MILD STEEL GRADE 2 CHROMEA grade 2 fastener with a bright mirror-like finish providing sharp looks for a variety of applications.HOT DIPPED GALVANIZEDHot dipped galvanized washers are much more corrosion resistant than zinc plated washers. For exterior and coastal area use. Material:STAINLESS STEEL 18-8Stainless steel 18-8 is an alloy of steel with high corrosion resistance. Stainless has become the material of choice for exterior and most marine applications. |