Delhi, India
Our Product / Services
High flow suction regulator. (Ward Vacuum Unit) High stability and accuracy. Materials: body in ABS-PC, vacuum gauge cover in PC, O-rings in NBR and silicone, pneumatic mechanism in POM, inlet thread connection in chromed plated brass. Fast ON/OFF switch. Water trap (made in polycarbonate with safety valve and particles filter) or hydrophobic bacterial and virus filter. Range: 0-100 kPa 0-750 mmHg. Precision: + 5% Flow: 90 L/min.
Air compressor system with three or more compressors, two or more reservoirs, one duplex conditioning system (absorption dryers, pre-filters, activated charcoal filters, particle filters and dew point alarm), emergency inlet point and electronic control panel is according to EN ISO 7396-1 and HTM 02-01. A wide range of capacities from 10m3/h to 1.000m3/h are available to satisfy any request. The fully automatic medical compressed air plant provides a reliable and constant air supply, in predefined pressure level, without the transport and management cost associated with heavy gas cylinders. The plant is designed to operate at a maximum of 10bar. A wide range of models are available to satisfy all types of installations.
Hospital curtain track system meets the accepted standard for the overwhelming majority of healthcare facilities nationwide and is ideal for enclosing patient beds, shower area or anywhere personal privacy is required. It provides an easy to install and cost-effective partitioning method in multi-bed hospital wards, which helps to offer some privacy to patients and staff. They can also be used as screening in retail/leisure changing rooms and shower areas.
The white powder coat finish of the track is aesthetically pleasing and easy to clean.
Key Features:
Modular system allowing flexibility of configurations to satisfy individual requirements
Rigid and durable curtain track made up of Aluminum extruded alloy
Runner run smoothly and quietly
Metal components are white powder coated to provide an aesthetic and easy to clean finish
Track mounted on the ceiling with the suspender, wall brackets and bridge clamps
Heavy work loading capacity runner for the curtain ensure the free and effortless movement in the track
100% polyester fabrics premium quality curtains with netted top to give aesthetic look
Water repellant, wrinkle free, antimicrobial and fire retardant treated fabric
3- Fold
Bed Side Screen, Three Fold, Tubular pipe framework, Removable Feet. Powder coated finish 244cm L x 165 cm H., when opened & 120 cm L 165cmcm, when closed.
4- Fold
Bed, Side Screen Four Fold. Tubular pipe framework, Removable Feet, Powder coated finish 244cm L x 165 cm H., when opened & 60 cm L 165cmcm, when closed.
Model No. - MI 905
Features :-
Specification
Wall and Ceiling construction / Cladding:This can be done using 4 types of materials
1. Stainless Steel 304 & 1.5mm thick with Gypsum board 12mm
2. Electro Galvanized Plated sheet with PUF panel 40-60 mm (cost effective solution)
3. EGP Sheet 1.5mm with Gypsum board 12mm
4. Solid Mineral Surface type
One of the most critical elements in an operation theater, therefore we offer both indigenous and imported Laminar Airflow system, confirming to strict International Standards.
We bring you the latest technology in the form of a Media Bridge. Media Bridge is a replacement for pendants. It is not only better ergonomically by providing 360 degree access but it also helps in maintaining the class of clean room specified as there is no obstruction in the Laminar Flow of air.
We offer a wide range of pendants. We recommend Pendants in an Operation Theater where budget and space is a concern.
Our Digital X-ray viewing screen is a very versatile project We offer indigenous analog X-ray Viewing screen.
A hatch is provided in each Operation theatre to remove waste materials from the operation theatre to dirty linen area just adjacent to Operation Theatre. Each hatch is equipped with two doors and the doors is electronically interlocked i.e. the hatch is designed in such a way that only one door is opened at one time. The UV light is installed that it is kept on while both the doors are closed. This UV light has to be automatically turned off in case of opening of either of the doors. There shall be indicators on both sides of the OT so that the door open / close status can be monitored from both ends.
The automatic change over decompression unit is designed to supply medical gas (oxygen- nitrous oxide-air-nitrogen-carbon dioxide) of any type of medical gas network, where continuity of supply is essential and where the pipeline is supplied from manifold high pressure gas cylinders. This product complies with all current safety regulations and laws and is designed and tested to guarantee safety operation. Automatic central manifold system for medical gases (O2, N2O, Air, N2, CO2) with pressure reducers, high pressure shut-off valves, automatic change over unit, analogue sensors, cylinder ramps, flexible connections, pigtails, cylinder holders and emergency inlet point is according to EN ISO 7396-1 and HTM 02-01.
We offer hermetic doors from Metaflax. Our Hermetic doors are 100% hermetically sealed. All kinds of options from single sliding, to double swing are available. Our solution is once again completely customizable as per the customer needs.
Medical compressed gases and vacuum outlets are suitable for external or internal wall mounting, for bed head unit and ceiling pendant installation. Two-part outlets are composed of the base part and the finishing part according to EN ISO 7396-1 & 2, EN ISO 9170-1 & 2 standards. Two-part Outlets for O2 - N2O - Air- Vacuum - Compressed Air according to ISO 7396-1, 2 Outlets are installed at the final delivery points in a medical gas pipeline system. They are used to supply the various gases using special quick-action connection fittings. The two-part outlets are composed of the base part and the finishing part.
Copper Pipes used are solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per BS EN 1057, BS 2871 part I, table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2 and Cu-DHP. Manufactures Test Certificate of copper pipes for physical properties and chemical composition are provided. Further, the pipes are tested by a reputed third party i.e. Lloyds
Register Services Pipe sizes will be used as:
76 mm OD X 1.5 mm thk 22 mm OD X 0.9 mm thk 54 mm OD X 1.2 mm thk 15 mm OD X 0.9 mm thk
12 mm OD X 0.7 mm thk 28 mm OD X 0.9 mm thk 42 mm OD X 1.2 mm thk
Air compressor system with three or more compressors, two or more reservoirs, one duplex conditioning system (absorption dryers, pre-filters, activated charcoal filters, particle filters and dew point alarm), emergency inlet point and electronic control panel is according to EN ISO 7396-1 and HTM 02-01. A wide range of capacities from 10m3/h to 1.000m3/h are available to satisfy any request. The fully automatic medical compressed air plant provides a reliable and constant air supply, in predefined pressure level, without the transport and management cost associated with heavy gas cylinders. The plant is designed to operate at a maximum of 10bar. A wide range of models are available to satisfy all types of installations.
The ball valves GS CIM312 are certified in accordance with the European standard EN 331:1998. They are approved in accordance with the European standard for gas appliances (90/396/EEC). Manufactured in accordance with EN 29000 - ISO 9000 are suitable for gas at low pressure. Available in the following sizes: 15mm, 22mm, 28mm, 35mm 42mm, 54mm and 76mm and 108mm sizes.
The ASVU are fitted to all medical gas and vacuum services in a prominent and accessible position at the entry to wards, theatres, intensive care, recovery rooms, etc. The ASVU panel is conforming to EN ISO 7396-1, HTM 02-01 standards and contains in metal box shut-off valves, pressure gauges, gas-specific connectors and low-high pressure switches.
The medical gases alarm panels are designed to remote monitoring the signals of medical gases installations with uninterrupted visual and sound notice to technical service personnel according to EN ISO 7396-1 and HTM 02-01. Alarm panels: 5 gases floor local alarm panel Inputs: 5 analogue, 10 digital, two buttons (Silence-Test). Outputs: LCD 220, 13 LED, Modbus, TCP/IP, Ethernet One station alarm panel Inputs: 5 analogue, 10 digital, two buttons (Silence-Test). Outputs: LCD 220, 13 LED, Modbus, TCP/IP, Ethernet Central alarm system for all gas stations (TCP/IP connection and WEB interface) Inputs: 15 analogue, 12 digital, KEYBOARD. Outputs: LCD 440, 21 LED, USB, Ethernet, 9 SPDT relays Centralized station for all alarm panels Inputs: 100 stations, interface touch panel PC or standard PC
Bed head units have been created for grouping all the necessary electrical, lighting, data, communications equipment and medical gases services and are designed to serve: Normal hospital care, intensive care areas, special care areas (reanimation, geriatric, coronary, etc.), old people home. All models of B.H.U. are constituted of extruded aluminum profiles, stove enameled, having different components for power mains, low and extra low voltages and for medical gases.
The ceiling pendants for special treatment rooms, is placed at the ceiling of these rooms, such as intensive care units and surgeries, above the patient bed or above the surgical table. The ceiling pendant has been created for grouping all the necessary electrical, data and medical gases services, required for use in operating theaters in anesthetic, surgical rooms and intensive care areas. The ceiling mounted pendant system is manufactured totally of special extruded anodized aluminum profiles or stainless steel and is electrostatic painted to any desired color. The ceiling mounted pendant systems are produced according to ISO 11197, EN ISO 5359, ISO 7396-1, ISO 7396-2, ISO 9170-1, ISO 9170-2, EN 60601-1 standards and they are labeled CE0653 to guarantee a high level of safety for patients and personnel.
The suction and disposal to the environment of the redundant gases from the anesthetic equipment inside the operating theatres but also from the emitted anesthetic gases from patients in the stage of recovery, is being applied by using an automatic anesthetic gas scavenging disposal system (AGSS), through the AGSS outlets which are installed in various departments. The Anesthetic Gas Scavenging (AGS) system removes anesthetic gas mixtures from theatres and recovery areas, thereby protecting the medical staff from possible long term health hazards. By virtue of its design, the new active disposal system can produce high levels of capture simply by connecting the terminal unit to the anesthetic breathing circuit via a receiver unit, thereby removing the majority of "pollution" at source.
Oxygen Flow Meter Available in a variety of calibrations Come standard with a 1/8" FNPT connection but will be custom configured upon request Available with a variety of adapters and accessories Color coded to specific gas MRI Options available Comes with a 1 year warranty.
One operating list board is provided in each operating theatre. It is made of ceramic having Magnetic properties and flushed to the wall of the operating room.
Pressure Relief Dampers provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper, strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty areas. Counter-weight balancing system will be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers will unique capability of controlling differential pressure to close tolerance. The PRD will remain closed at pressure below the set pressure and would open fully at pressure only fractionally above the threshold pressure. The body would be epoxy coated as per standard BS colors. First class electrolyzed steel plate is used for body and with high grade SS304 Stainless Steel for blades.
We also offer indigenous Hermetic doors for all areas including OT, scrub as well as ICUs. All kinds of sensors are also available.
The automatic change over decompression unit is designed to supply medical gas (oxygen- nitrous oxide-air-nitrogen-carbon dioxide) of any type of medical gas network, where continuity of supply is essential and where the pipeline is supplied from manifold high pressure gas cylinders. This product complies with all current safety regulations and laws and is designed and tested to guarantee safety operation. Automatic central manifold system for medical gases (O2, N2O, Air, N2, CO2) with pressure reducers, high pressure shut-off valves, automatic change over unit, analogue sensors, cylinder ramps, flexible connections, pigtails, cylinder holders and emergency inlet point is according to EN ISO 7396-1 and HTM 02-01.
