Pune, Maharashtra, India
Our Products
Standard Accessories :
Hydraulic Blade Tension
Auto Saw Frame Height Adjustment
Heavy Duty Reduction Gear Box (Elecon/Shanti)
Stepless Cutting Feed Regulation
Complete Electric System
Complete Coolant System
Driven Chip Brush
Complete Hydraulic System
PLC Control for all Electric & Hydraulic Function
Hydraulic & Roller Blade Guide for long life accurate cutting
Blade Breakage Detector
Extra Accessories
Chip Conveyor
A.C.Drive for Infinitely varible speed control
Job Roller Stand
Bundle Cutting Attachment
Bi-Metal Bandsaw Blade
Variable Vice Pressure for thin walled job
Wire Brush
Bar Stand
| Sr. No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | |
| Cutting Capacity Round (mm) | 250 | 300 | 350 | 425 | 530 | 650 | 800 | 1000 | 1250 | 1500 | |
| Cutting Capacity Square (mm) | 250 X 250 | 300 X 300 | 350 X 350 | 425 X 425 | 530 X 530 | 650 X 650 | 800 X 800 | 1000 X 1000 | 1250 X1250 | 1500 X 1500 | |
| Blade Dimension | 3760X27X0.90 | 4100X34X1.10 | 4420X34X1.10 | 4860X41X4.30 | 5800X54X1.30 | 6900X54X1.60 | 8000X67X1.60 | 8800X67X1.60 | 12300X80X1.60 | 13100X80X1.60 | |
| Blade Speed | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | |
| Power Required | Saw Drive | 1.50/2.00 | 2.20/3.00 | 3.70/5.00 | 5.50/7.50 | 7.50/10.00 | 9.30/12.50 | 15.00/20.00 | 15.00/20.00 | 15.00/20.00 | 15.00/20.00 |
| Kw/Hp 440 V AC | Hyd.Drive | 0.75/1.00 | 0.75/1.00 | 0.75/1.00 | 1.75/1.00 | 1.75/1.00 | 1.50/2.00 | 1.50 / 2.00 | 2.25/3.00 | 2.25/3.00 | 2.25/3.00 |
| 50Hz 3 Phase | Coolant Pump | 0.12/0.16 | 0.12/0.16 | 0.12/0.16 | 0.12/0.16 | 0.12/0.15 | 0.12 / 0.16 | 0.12 / 0.16 | 0.12 / 0.16 | 0.12 / 0.16 | 0.12/0.16 |
| Hyd.Tank | Litre | 40 | 50 | 60 | 60 | 80 | 80 | 80 | 130 | 130 | 130 |
| Coolant Tank | Litre | 60 | 60 | 60 | 60 | 80 | 80 | 80 | 130 | 130 | 130 |
| Apprx Dia | (Semi Auto) | 2 X 1 X 1.3 | 2.3 X 1 X1.3 | 2.3 X 1 X 1.3 | 2.5 X 1 X X1.7 | 3.3 X 1.4 X2.3 | 4.0 X 1.5 X 2.5 | 4.6 X 1.7 X 2.9 | 5.0 X 1.9 X 3.5 | 5.0 X2.0 X4.0 | 6.0 X2.0 X4.0 |
| Weight (Approx in Kg.) | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 | 00.00 |
|
Standard Accessories :
Gear Box : Elecon /Shanti Make
Gear Box Oil
Job Stopper, VBlet & Pulley
Electric Drive Motor, Coolant Pump,
Contractor Push Button
Extra Accessories
Roller Stand
Bi-Metal Bandsaw Blade
Carbon Steel Bandsaw Blade
| Sr. No. | 1 | 2 | 3 | 4 | 5 |
| Round (MM) | 200 | 300 | 350 | 400 | 450 |
| Square (MM) | 150 x 150 | 250 X 250 | 300 X 300 | 350 X 350 | 400 X 400 |
| Drive Motor | 1 HP (1440 RPM) | 2 HP (1440 RPM) | 2 HP (1440 RPM) | 2.5HP (1440 RPM) | 3 HP (1440 RPM) |
| Coolant Pump | 0.15HP 440 Vit | 0.15HP 440 Vit | 0.15HP 440 Vit | 0.15HP 440 Vit | 0.15HP 440 Vit |
| Blade Speed | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 | 20-40-60 |
| Blade Size | 3000 X 27 X0.9 | 3760 X27 X0.9 | 4100 X 34 X 1.1 | 4420 X 34 X 1.1 | 4570 X 41 X 1.1 |
| Net Weight (Aprox.) | 350 | 575 | 675 | 725 | 800 |
| Dimension (H x L x W) | 1.1 X1.8 X1.4 | 1.1 X 2.4 X 0.8 | 1.2 X 2.6 X 0.8 | 1.2 X 2.6 X 0.8 | 1.5 X 2.7 X 1.0 |
Extra Parts :
Coolant Pump One Set. (Coolant Pump, Tank, Inter adjustable, Stainless Steel Pipe. Outlet Pipe, Valve, etc.)Collet 3 to 12 mm rice (Total Collets - 6 nos.)
| Sr. No. | 1 | 2 |
| Spindle RPM | 1800 rpm | 0 - 2200 rpm |
| Shaft Clamping Dia | 12mm-70mm | 12mm-100mm |
| Length of Key-Way | 5 mm-150 mm | 5 mm-200 mm |
| Key-Way Size | 3 mm-13 mm | 3 mm-16 mm |
| Standard Collet | ER - 20 | ER - 25 |
| Power Required | 1 HP / 0.75 KW | 1.5 HP/1.12 KW |
| Approx. Weight (in. Kg.) | 500 | 625 |
Standard Accessories :
Motor Pulley
Clutch Key
Clutch Key Springs
Slide Adj. Spanner
Fly Wheel & Gear Guard
Oil Cup for Lubrication Point
Knock-out System
| Sr. No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| Tonnage | Ton | 10 | 20 | 30 | 50 | 75 | 100 | 150 | 200 | 250 |
| Stroke Adjustment | m.m. | 6-51 | 10-76 | 10-76 | 13-102 | 13-115 | 13-127 | 13-140 | 13-152 | 13-165 |
| Adjustment of Ram | m.m. | 25 | 38 | 38 | 45 | 45 | 51 | 51 | 51 | 51 |
| Crank Shaft Dia (At Main Bearings) | m.m. | 63 | 76 | 83 | 95 | 115 | 127 | 152 | 160 | 165 |
| Bed of Ram | m.m. | 215 | 225 | 290 | 355 | 375 | 420 | 445 | 470 | 485 |
| Hole of Ram | m.m. | 25.4 | 32 | 38 | 38 | 45 | 51 | 51 | 63 | 63 |
| Size of Bed (LR. x FB.) | m.m. | 355x460 | 457x508 | 508x559 | 559x610 | 610x813 | 660x762 | 711x914 | 762x965 | 812x1016 |
| Opening in Bed | m.m. | 82 | 89 | 108 | 132 | 203 | 210 | 222 | 236 | 300 |
| Thickness of Bolester | m.m. | 55 | 63 | 63 | 76 | 89 | 102 | 102 | 115 | 127 |
| Opening in Bolester (Dia.) | m.m. | 76 | 82 | 102 | 125 | 198 | 203 | 215 | 230 | 250 |
| Fly Wheel Dia. | m.m. | 425 | 508 | 558 | 660 | 812 | 914 | 1016 | 1065 | 1220 |
| Stroke Per Minute | m.m. | 70 | 60 | 60 | 55 | 50 | 40 | 30 | 30 | 25 |
| Electric Motor (1440 Rpm) | m.m. | 1 | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 |
| Floor to Top of Bed | m.m. | 720 | 750 | 750 | 800 | 875 | 863 | 863 | 863 | 863 |
| Height | m.m. | 1450 | 1650 | 2050 | 2650 | 3125 | 3375 | 3550 | 3975 | 4125 |
| Left to Right | m.m. | 610 | 725 | 775 | 1050 | 1225 | 1425 | 1650 | 1975 | 2120 |
| Front to Back | m.m. | 775 | 925 | 1025 | 1350 | 1625 | 1875 | 2050 | 2250 | 2300 |
| Approx. Weight | Kg. |
Standard Accessories :
Elec. Control Panel & Production Counter
Hydraulic Overload Safety
Motorized Side with Brake Motor & Die Height Indicator
'SMC/FESTO' make FRL & Pneumatic Fittings
Motorized Grease Lubrication
Slide Knockout Device, 4 Way Cam Limit Switch.Anti-repeat Safety Device
PLC Control System
Misfeed Detector Socket
ROSS / Toyoki Japan make Solenoid Valve
Optional Accessories
Variable Stroke
Pneumatic Die Cushion
Photo Safety Guards
Variable Speed
Anti-vibration Mounts
| Sr. No. | 1 | 2 | 3 | 4 | 5 |
| Capacity in Tons | 110 | 160 | 200 | 250 | 315 |
| Variable (Optional) | 10-120 | 10-160 | 10-160 | 10-160 | 10-160 |
| Area of Bolster (LR x FB) | 740x680 | 820x760 | 820x760 | 1020x850 | 3250x1250 |
| Thickness of Bolster 1 | 100 | 120 | 120 | 150 | 150 |
| Shut Height (SDAU) | 450 | 500 | 500 | 550 | 600 |
| Ram Area | 650x500 | 700x550 | 700x500 | 850x630 | 1000x800 |
| Ram Adjustment | 80 | 90 | 90 | 100 | 125 |
| Floor to Top of Bolster | 900 | 900 | 900 | 1000 | 1000 |
| Stroke per Minute | 40 | 30 | 30 | 25 | 25 |
| Floor Space Required | 1120x1490 | 1220x1600 | 1220x1600 | 1490x1790 | 1740x900 |
| Main Motor HPxP | 10x4 | 15x4 | 20x4 | 25x4 | 30x4 |
| Slide Adjustment Motor HPxP | 0.75x4 | 1x4 | 1x4 | 1.5x4 | 2x4 |
| Overall Height | 3100 | 3290 | 3290 | 3600 | 4500 |
| Approx. Weight | 6000 | 8000 | 10000 | 18000 | 24000 |
Extra Accessories
Foot Switch for Single PH. 2 Motor
Foot Switch for Three PH. 2 Motor
Vearsabal Speed Driver - 1 / 2 / 3 HP.
| Sr. No | Working Widht | Thickness | Approx Weight |
| 1 | 605 mm | 2 mm/14 Swg | |
| 2 | 1000 mm | 1.6 mm/16 Swg | |
| 3 | 1295 mm | 1.6 mm/16 Swg |
Forming is process to bend the sheet / strip as per design or drawing. The blank of sheet is passed between roll former to achieve the desired shape without any variation or change in thickness. Wide rang of machine helps customer to select the machine as per job requirement. The lin is supplied with attachments which facilite to get finished products at end with desired length.
