Our Products #3659393

Description:"GMP" Rotary Vial Washing Machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass vials. The machine operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of vials.

Operation:The vials are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed vial holders provided to hold vials with neck diameter. The vial are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the vial. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when vial are stopped means insure saving of water, and sequence of various washing media to suit specific requirement.

• Geneva Mechanism.
• Four inner (Included one air wash) & one outer.
• Sequence of washes to customers choice.
• Easy operation.
• Stationary nozzles eliminate contamination of water cycles.
• Easy loading and unloading.
• Individual solenoid valve for each washing sequence, that eliminates carbon plate and other accessories reduce leakage and maintenance to minimum.
• Higher capacity centrifugal pumps to wash bigger vials.
• The stationary nozzles avoid chipping of vial necks.
• Pumps and tanks are mounted on portable stand for easy maintenance.
• Vial guide system especially for lightweight vial.
• Pumps and Tanks are mounted on Portable stand for Easy Maintenance.
• Separate panel control to avoid any short circuit due to spraying of water.
• S.S. glycerin fill pressure meter.

Description:Automatic Accufill Liquid Bottle Filling Machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine. Machine works on VOLUME=TIME TECHNOLOGY AND SPEED=FLOW RATE. The unit is made compact, versatile and S.S. body. No container No filling system arrangement is standard features of the machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.

Operation:Containers moving on SS Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container.

To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards slowly from bottom level of bottle towards neck during filling. No container No filling system arrangement is standard features of the machine. The main drive of the machine and conveyor drive consist of AC Motor with synchronized variable AC Frequency Drive.

The two knobs provided to set fill volume; this means fill size can be easily set.

• Accuracy 0.5 % in single doze.
• No change parts require.
• Different speeds can be set, depending on fill volume and foaming nature of material
• Body covered with SS sheet.
• All contact parts silicon tubing.
• A unit to fill variety of liquid and can be used for various type of containers.
• No dripping or last drop problem
• No contamination
• No maintenance required
• No bottle no filling system.
• Facility provided for the fine tuning of the volume
• Inbuilt protection against over current, voltage fluctuation, short circuit in ac frequency drive.
• Ideal for aseptic, sheer sensitive, viscous, and corrosive liquids also.

Description:"GMP" Automatic Volumetric Liquid Vial Filling Machine work on volumetric principle with diving nozzles. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor, Reciprocating Nozzle with self-centering devices & SS Syringe. No container No filling system arrangement is standard features of the machine.

The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive.

Operation:Containers moving on SS Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container.

To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards slowly from bottom level of vial towards neck during filling.The dosing block with a hexagonal bolt fitted below syringes. This means fill size can be easily set.

• 1 % Filling accuracy on single dose.
• No Vial No Filling System.
• Rigid vibration free construction for trouble free performance.
• SS Elegantly matt finished body.
• Elegant and easy control panel for total control on operation.
• Minimum charge overtime, from one size to another container or fill size.
• Self-lubricating UHMW-PE guide profile for S.S. slat chain provide low friction wear surface, smooth and noiseless conveying.
• Error code display on A/c frequency drive on control panel.
• Drain tray around machine platform.
• Drip tray under the conveyor.
• Pneumatic vial stopping arrangement.
• Synchronized two nos. A/c drives for main motor & conveyor belt.
• Safety guard for conveyor gearbox, motor and pneumatic cylinders.
• MCB for over load protection, and prevent against short circuit.
• Inbuilt protection against over current, voltage fluctuation, short circuit in A/c frequency drive.

"GMP" Automatic RotaryRinsing, Filling & Capping Machineis versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine, work on gravity filling principle with rotary motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.No container No filling & No Sealingsystem arrangement is standard features of the machine.

The main drive of the machine, conveyor drive & cap-feeding bowl consist of A/c Motor with synchronized variable A/c Frequency Drive.

INFEED AIR CONVEYOR (With Air Blower)

In-feed air conveyor fitted with high pressure air blower with filter fitted on the suction side. This conveyor feeds empty bottles into the in-feed rotor by neck holding mechanism of the Trio-block machine. The conveyor is mounted at right angles to the Trio-block machine.

AUTOMATIC ROTARY RINSING MACHINE (16 HEAD)

The In-feed Rotor is transfer the bottle from In-feed Air Conveyor to the Rinsing rotor. The bottles are automatically picked up by the rinser rotor from in-feed rotor with neck holding & bring it to the grippers clamp. The grippers clamps turn them upside down means inverted positions which place the bottle mouth over the nozzle. Where the fountain type nozzle spray water in-side the bottle in series, each bottle being rinsed up to four seconds. Mechanical rinse valve provides the featureNO BOTTLE NO RINSING. When the bottles are held at the neck, there is no distortion of the bottle profile. At the end of the rinsing cycle, the bottle is drained of most reschedule water, before being straightened out and handed over to the filling rotor for the filler operation.

AUTOMATIC ROTATY FILLING MACHINE (12 HEAD)

The mechanical filling valves, mounted radically on the rotary filling tank, are actuated automatically by the bottles when lifted up to commence filling. Here again the bottles are held at the neck by neck holding grippers which ensures precise valve centering. Consequently, there is no bottle damage or water wastage during the filling operation. The main machine drive motor has variable speed A.C. Drive, by which the machine speed can be varied depending upon the bottle size to be run. Three position probe fitted in the filling tank automatically regulates the machine speed based upon product inflow, using a panel mounted PLC. NO BOTTLE NO FILLING system arrangement is standard features of the machine.

AUTOMATIC ROTARY SCREW CAP SEALING MACHINE (6 Head)

The feed container moving on transfer rotor, this transfer rotor feed the bottle from the filler rotor to the capper rotor. The Capper Rotor bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing. The Capping adopts a uniquePICK & PLACEmechanism for capping in conjunction with an efficient bottle anti-turn device. The bottle is held at the neck firmly during capping to produce absolutely leak proof results.

CAPPER ELEVATOR

Caps are fed into the machine by an automatic cap elevator having an S. S. 304 ground level hopper, which can hold up to three thousand caps. This hopper also an automatic agitator, which gets activated as soon as the caps stop moving inside the cap hopper. Thus, the elevator is never starved of caps. The elevator orientates and feeds caps at the desired rate to the capper rotor. Shortly before cap pickup the caps are exposed to UV light for sterilization. After capping, the bottles are .discharged on to the out-feed slate conveyor.

Description:The Automatic Cap Sealing Machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.

Operation:The feed container moving on conveyor belt are fed into star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head. Where the sealing head is performing perfect operation of threading & sealing.

Salient Features:

• No container No cap arrangement.
• SS elegantly matt finished body.
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Low noise level, low power consumptions.
• Self-lubricating UHMW- PE guide profile for low friction wears surface, smooth and noiseless conveying.
• SS cladding or hard chrome platting of all exposed parts to ensure long life and resistance against corrosion.
• Synchronized A/C drives to synchronize, Conveyor, Star wheel and Platform turret & capping bowl.
• Adjustable bottle height gauge for easy and quick setting.

Description:
"GMP"Automatic High Speed Wet Glue Labeling Machine is automatically labels round container of glass, plastic, aluminum, pet, cardboard container, will wrap-around labels in the vertical position by using cold glue. Automatic High Speed Wet Glue Labeling Machine is rigid, versatile and engineered for reliability and enhance operational efficiency in addition, it has several exclusive features which offer additional advantages.

Operation:The round containers positioned accurately by the feed worm for wrap-around operation at the operation at the labeling point, the rotating glue cylinder receives clod glue from gluepot that subsequently gets transferred on the Glue Rubber Roller. Finally a fine, even and thin film of glue is transferred to the gluing pad. The round container on the moving conveyor at the feed worm actuates a sequence, which result in the oscillation of the Label Box. The rotating Label Master aligned with the help of pick up fingers from the Label Master & with oscillating Label Box. The pick up cylinder receives labels with the help of pick up fingers from the label master. The pick up cylinder holds the labels perfectly with due to vacuum during its rotational movement. Simultaneously the pick-up fingers move inside. The round container moves on conveyor with the help of worm and glued label on pick-up cylinder wrapped around to container by virtue of strip belts. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.

• Stainless Steel cladding or hard chrome plating of all exposed parts to ensure long life and resistance against corrosion.
• Adjustable Conveyor Height to align with other machine of the line.
• Minimum changeover time is required from one size of container or label to another.
• Special self-aligning bearing ensure smooth and trouble free rotation of the parts. These self-aligning bearings help in quick assemble during periodical maintenance of the unit. They also allow more flexibility in maintaining tolerances.
• No container, No label, an electrical sensing device avoids wastage of labels, it also helps in keeping the unit neat & clean.
• Minimum changeover time is required from one size of container or label to another.
• Suitable for overlap labeling an flag type labeling where the length of label is more than circumference of the container.
• A highly efficient vacuum pump develops sufficient vacuum to hold labels big or small on the pick-up cylinder.
• Complete protection of the motors is ensures by the contactors and relays of appropriate ratings.

Description:The Packing conveyor belt is having stainless steel Table Top with moving Endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box.

Operation:The conveyor belt brings the container or products from the labeling/blister/strip machine, These bottles/products operators in turn pick up the bottles/products & visually inspect the bottles/products & doing necessary action like primary packing, secondary packing, picking & placing at proper place.

• Structure is made of S.S. 304, 30 mm sq. Pipe, 16 SWG with matt finish.
• A/c frequency variable drive.
• Belt-alignment system for long life & striate running of belt.
• Direct gear drive.
• Length can make as per customer requirement.
• S.S. elegantly matt finishing.
• Adjustable height of conveyor belt, to align with other machine of the line
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

Description:GMP Automatic Liquid Manufacturing Plant is made as per WHO & US FDA standards to manufacture Syrup / Suspension / oral / external liquid for pharmaceuticals. This is a completely closed vessel with agitator mounted on top / Bottom dome.The vessel will be available with different accessories for different applications i.e. standard stirrer / magnetic stirrer / as required by the customers.

The liquid manufacturing plant consists of :

• Sugar syrup vessel.
• Online sugar syrup pre-filter.
• Manufacturing vessel storage vessel
• Vacuum system for transfer of sugar and sugar syrup.
• Product piping.
• Control panels.
• Transfer pumps.

Unique features of oral liquid manufacturing plant are:

• All the vessels are interconnected with pipeline and the process is fully automatic, untouched with Electrical / PLC Control.
• CIP/SIP available.

• The oral liquid manufacturing plant is designed to be operated by one operator and one helper, saving on precious man- power cost.
• Sugar syrup is transferred to manufacturing vessel through online sugar syrup prefilter.
• Entry of all propeller agitations are from bottom / Top through a specially designed seal face
• Pipes, pipe fittings and various Parts are of SS 316, seamless, internally electropolsihed with DIN standard unions and silicon gaskets.

• Capacity :

  • From 500 litres To 3000 litres.
  • Steam / Electrical Heated

Description:GMP Automatic Ointment Manufacturing Plant is made as per WHO & US FDA standards to manufacture Ointment / Lotion / Cream / Tooth Paste / other emulsions & homogenizations. This is a completely closed vessel with agitator mounted on top / Bottom dome.The vessel will be available with different accessories for different applications i.e. standard stirrer / magnetic stirrer / as required by the customers.

The Ointment manufacturing plant consists of :

• Manufacturing Vessel
• Wax Phase Vessel
• Water Phase Vessel
• Storage Vessel
• Vacuum Pump
• Control Panel
• Working Platform
• Material Transfer Pump to Transfer material from manufacturing Vessel OR Planetory Mixer to Storage Vessel & Storage Vessel to Ointment ( Tube ) Filling M/C. ( 02 nos.)

Unique features of oral liquid manufacturing plant are:

• All material transfers are done by vacuum or by transfer pumps.
• All the vessels are cGMP (paint free construction)
• The gaskets used are of food grade.
• All contact parts are of S.S. 304 quality material (SS316 provided on demand) & mirror finished and is crevice free.
• The entries of all agitators are from top & High Speed Emulsifier from bottom or as per customer choice.
• All pipes, pipe fittings and valves are of SS304 / SS316 (as per customer requirement) seamless quality, with tri-clover ended joints.
• All values of temperature & time of the plant are indicated digitally on the control panel.
• All the inlet & outlet connections are provided with tri clover joints, which are very easy for cleaning & replacement.

Capacity :

• From 100 litres To 1500 litres.
• Steam / Electrical Heated

Description:
"GMP"Automatic Measuring / Dosing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, feed worm, container holding star plate, & pressing plate. All the exposed parts of the unit are in S.S., chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.

Operation:The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

• No container no cup arrangement.
• SS elegantly matt finished body
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Specially designed hopper is provided to increase storage capacity of bowl.
• Low noise level, low power consumptions.
• Self lubricating UHMW- PE guide profile for low friction wear surface, smooth and noiseless conveying
• SS cladding or hard chrome platting of all exposed parts to ensure long life and resistance against corrosion
• Synchronized A/C drives to synchronize, Conveyor, Star wheel and Platform turret & capping bowl.
• Universal coupling for quick and easy setting of In-feed worm.

Description:Inspection table is equipment consisting of a three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white colour. Inspection table have stainless steel structure with moving S.S. slat chain. Structure made out of S. S. square pipe & supported on adjustable bolts.

Operation:The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts & further on the side tables for operators sitting on either side of the table. The operators in turn pick up the bottles & visually inspect the bottles in the alternate white & black background to check for any partials in the liquid filled, sealed & breakage of bottle. After inspection the bottles are placed in the central track, which is transfer for labeling.

• A/c frequency variable drive.
• Direct gear drive.
• Length can make as per customer requirement.
• PVC black & white board as per GMP norms.
• UHMW self lubrication guide below chain.
• SS elegantly matt finishing.
• Adjustable height of conveyor belt, to align with other machine of the line
• Self-alignment bearing for easy maintenance.
• Rigid Vibration free Construction for trouble free performance.

Descriptions:Stainless steel scrambler & Un-scrambler, which is familiar as turn table. This is built on SS Square frame, solid guide rail & reduction gear box for jerk less & noiseless performance. Turntable is useful to ensure total synchronization, uniform flow of container and to take a turn at 90 degree to suit different machine and purpose in automatic liquid line.

Operation:Container inputs in turn table by manually or automatic will rotate on disk of turn table and exit through outlet, during rotation of container will guided by a SS strip, which will guide the container towards outlet path.

Description:
GMP FILTER PRESSis a sparkler type and consist of S.S. Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley.

Operation:The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid, if required the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.

• Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C
• M.S / S.S. Jacket can be provided for hot filtration.
• Gives crystal clear filtration by filtering particles up to 1 micron size.
• Scavenger arrangement to remove all the liquid.
• Cake can be dried either by compressed air or by insert gas, steam.
• Filtration rates from 600 Litres/hr. to 30000 Litres/hr possible depending on the models.
• Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.
• Sample collecting device & safety valve provided.

Description:GMP Tanks & Vessels are made as per WHO & US FDA standards to storage / manufacture Syrup / Suspension / oral / external liquid for pharmaceuticals. This is a completely fabricated tailor made as required by the customers.

Material of construction:

• All the tanks / vessels are made from S.S. 304 / S.S. 316.
• CIP/SIP available as per requirements.
• Available with top lid / without lid.
• Available with three / four legs.
• Available with Electrical / Steam operated vessel.
• Available with glass wool insulation / without insulation.

Capacity :

• From 50 litres To 3000 litres.

Main Features:Automatic feeding, nice and quick adjustments, easy controls, accurate registering, uniform impressions, high output 250 Cartons/min.

Implimentation:

• Use for Pharmaceuticals, Cosmetics, Distilleries, Food & Packing Industries
• Use for adding special information at the time of actual packing.
• Use to add price change or special offer to existing Cartons.
• Main features of the machine are Automatic feeding, quick & easy adjustment, easy controls, accurate registering, uniform impression and high speed.

Description:Colloid mills are specialized machines used for milling, homogenizing, dispersing and breaking down of agglomerates into small size particles. The primary function of this machine is to breakdown larger particles into uniform sized small particles. The raw material is fed into a hopper and made to pass between the rotor and stator elements. The material is subjected to high shearing and discharged from the hopper onto the second pass wherein it is recalculated; this is due to the conical shape of the machine and the centrifugal effect of the high speed rotating motor. The machine is equipped with cooling and heating jackets and flame proof motor. The output or productivity varies from machine to machine and depends on factors such as feed rate and viscosity of the raw material/particles.

Application of Colloid Mill:

• Pharmaceuticals
• Suspensions
• Emulsions
• Cosmetics
• Salient Features:
  
  • All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems.
  • Coupling provided between motor shaft and rotor shaft for ease in maintenance Vertical Model.
  • Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.
  • Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.
  • Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
  • Three-way cock for draining and re-circulation of liquids provided as standard.
  • Contact parts can be easily dismantled for cleaning.
  • Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation.
  • Flameproof motor and flameproof rotary switch can be provided on request at extra cost.
  
  Utility Requirement:
  Electrical supply : 3 Phase + Neutral + Earthing
  Electrical load : 4 KW

Lobe pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.

Rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

How Lobe Pumps Work:
Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.

• As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate.
• Liquid travels around the interior of the casing in the pockets between the lobes and the casing -- it does not pass between the lobes.
• Finally, the meshing of the lobes forces liquid through the outlet port under pressure.

Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in lobe pumps than in other PD types. Since the lobes do not make contact, and clearances are not as close as in other PD pumps, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.

Advantages:

• Pass medium solids
• No metal-to-metal contact
• Superior CIP/SIP capabilities
• Long term dry run (with lubrication to seals)
• Non-Pulsating discharge

Description:
GMPs Semi Tub Filling & Sealing Machine work on volumetric principle The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, Reciprocating Nozzle with self-centering devices & SS Syringe. No tube No filling system arrangement is standard features of the machine.

The main drive of the machine A/c Motor with synchronized variable A/c Frequency Drive.

Operation:
The Tubes are loaded on the subsequent indexing part of rotating platform and are filled in series of operations. Specially designed Tube holders provided to hold Tube with neck diameter. The Tubes are placed in an Inverted position in these cup shaped holders. The Nozzle also filling when Tubes are stopped. After filling the sealing head and batch coding device are performing perfect operation of crimping and coding of mfg. date & batch no. etc.

Salient Features:

• No Tube No Filling & No Crimping System.
• Rigid vibration free construction for trouble free performance.
• SS Elegantly matt finished body.
• Elegant and easy control panel for total control on operation.
• Minimum charge overtime, from one size to another container or fill size.
• Geneva Mechanism.
• Nylon & bearing type Tube Holder.
• Easy loading and unloading.
• Synchronized A/c drive for variable speed
• 51 Ltr. Acid proof hopper
• Synchronized A/c drive for variable speed
• MCB for over load protection, and prevent against short circuit.
• Inbuilt protection against over current, voltage fluctuation, short circuit in A/c frequency drive.
• Beam with folding station for metal tube - closure type 1.
• Heat sealing unit for Lami Tubes P/1 Comprising Straight Rifles, Oblique Rifles & Plain.
• Temperature regulator for Heating Element.
• Coding device for coding one side with 10 digit letters.
• Blow off for connection to Compressed Air

Optional Feature

• Heat sealing attachment with element jaws.

Utility Requirement:
Electrical supply : 3 Phase + Neutral + Earthing
Electrical load : 2 KW
Air Pressure: Minimum : 6 bar pressure 0.5 CFM