Delhi, India
Our Products
| Made from Tool Steel Double Ended BoringBars and holder comes complete with Screwsand Allen Keys. |
| Black Shining Finish. |
|
Article No:- 459 |
|
Cat No. |
Bar Size | HOLDER SIZE | Suitable For Square Bit Size | ||
| Dia | Length | Length | Square | Square Bit Size | |
| BBH-1693 | 3/8” | 4-1/2” | 2-1/4” | 2-1/4” | 1/8" |
| BBH-1694 | 7/16” | 5-1/4” | 2-1/2” | 1/2” | 3/16" |
| BBH-1695 | 9/16” | 6-3/4” | 3” | 5/8" | 1/4" |
| BBH-1696 | 3/4” | 9-1/4” | 3-3/4” | 7/8” | 5/16" |
| BBH-1697 | 7/8” | 11-1/2” | 4-1/2” | 1-1/4” | 3/8" |
| BBH-1698 | 1-1/8” | 12-3/4” | 4-1/2” | 1-3/8” | 7/16” |
| BBH-1699 | 1-3/16” | 13-3/4” | 5” | 1-5/8” | 1/2" |
| Each Reamer expands to the smallest size of next larger size | |
| Reamers are used for light cut, repair work, removing stock or simply for enlarging holes | |
| Reamers can be hand operated by use of wrenches. The size can be adjusted by moving the blades in tapered slots by means of loosening one nut and tightening the other. |
|
Article No :- 408 |
| Cat No.
|
Size |
Range |
No. of Blades | |
| Inch | mm | |||
| AHR - 1436 | 8/A | 1/4 to 9/32 | 6.35 to 7.14 |
4 |
| AHR - 1437 | 7/A | 9/32 to 5/16 | 7.14 to 7.94 |
4 |
| AHR - 1438 | 6/A | 5/16 to 11/32 | 7.94 to 8.73 |
4 |
| AHR - 1439 | 5/A | 11/32 to 3/8 | 8.73 to 9.52 |
5 |
| AHR - 1440 | 4/A | 3/8 to 13/32 | 9.52 to 10.32 |
6 |
| AHR - 1441 | 3/A | 13/32 to 7/16 | 10.32 to 11.11 |
6 |
| AHR - 1442 | 2/A | 7/16 to 15/32 | 11.11 to 11.91 |
6 |
| AHR - 1443 | A | 15/32 to 17/32 | 11.91 to 13.49 |
6 |
| AHR - 1444 | B | 17/32 to 19/32 | 13.49 to 15.08 |
6 |
| AHR - 1445 | C | 19/32 to 21/32 | 15.08 to 16.67 |
6 |
| AHR - 1446 | D | 21/32 to 23/32 | 16.67 to 18.26 |
6 |
| AHR - 1447 | E | 23/32 to 25/32 | 18.26 to 19.84 |
6 |
| AHR - 1448 | F | 25/32 to 27/32 | 19.84 to 21.43 |
6 |
| AHR - 1449 | G | 27/32 to 15/16 | 21.43 to 23.81 |
6 |
| AHR - 1450 | H | 15/16 to 1-1/16 | 23.81 to 26.99 |
6 |
| AHR - 1451 | I | 1-1/16 to 1-3/16 | 26.99 to 30.16 |
6 |
| AHR - 1452 | J | 1-3/16 to 1-11/32 | 30.16 to 34.13 |
6 |
| AHR - 1453 | K | 1-11/32 to 1-1/2 | 34.13 to 38.10 |
6 |
| AHR - 1454 | L | 1-1/2 to 1-13/16 | 38.10 to 46.04 |
6 |
| AHR - 1455 | M | 1-13/16 to 2-7/32 | 46.04 to 56.36 |
6 |
| AHR - 1456 | N | 2-7/32 to 2-3/4 | 56.36 to 69.85 |
6 |
| AHR - 1457 | O | 2-3/4 to 3-11/32 | 69.85 to 84.93 |
6 |
| Flexible Rules have permanently engraved graduation on front and Conversion table etched on the back. | |
| Pocket Rules are provided with clip for convenience as well as dual use as a depth gage. | |
| Flexible Inch alone are graduated 32nd on one side and 64th on the opposite side | |
| Flexible Inch / Metric rules are graduated 16th , 32nd and 64th on one side and 0.5 and 1 mm on the opposite side | |
| Flexible Metric alone are graduated 0.5 mm on one side and 1 mm on the opposite side. |
| Removes burrs from small Holes | |
| Enlarges and Countersinks holes in soft metals. | |
| Handy Tool for Mechanics, Electricians, Plumbers |
|
Article No :- 410 |
|
Cat No. |
Range |
|
|
Inch |
mm |
|
|
TR-1461 |
1/8 to 1/2 |
3.0 to 12.5 |
|
TR-1462 |
1/8 to 5/8 |
3.0 to 16.0 |
|
TR-1463 |
5/32 to 7/8 |
4.0 to 22.0 |
| Hardened and Tempered to perfection
|
|
Article No :- 413 |
|
Cat. No |
Size | Outer Dia. of Dies |
|
| Right Hand Dies. |
Left Hand Dies. |
||
|
DR-1540 |
DH-1560 |
1/4- 20 UNC |
1 |
|
DR-1541 |
DH-1561 |
1/4- 28 UNF |
1 |
|
DR-1542 |
DH-1562 |
5/16- 18 UNC |
1/font> |
|
DR-1543 |
DH-1563 |
5/16- 24 UNF |
1 |
|
DR-1544 |
DH-1564 |
3/8- 16 UNC |
1 |
|
DR-1545 |
DH-1565 |
3/8- 24 UNF |
1 |
|
DR-1546 |
DH-1566 |
7/16- 14 UNC |
1-1/2 |
|
DR-1547 |
DH-1567 |
7/16- 20 UNF |
1-1/2 |
|
DR-1548 |
DH-1568 |
1/2- 13 UNC |
1-1/2 |
|
DR-1549 |
DH-1569 |
1/2- 20 UNF |
1-1/2 |
|
DR-1550 |
DH-1570 |
9/16- 12 UNC |
1-1/2/font> |
|
DR-1551 |
DH-1571 |
9/16- 18 UNF |
1-1/2 |
|
DR-1552 |
DH-1571 |
5/8- 11 UNC |
1-1/2 |
|
DR-1553 |
DH-1573 |
5/8- 18 UNF |
1-1/2 |
|
DR-1554 |
DH-1574 |
3/4- 10 UNC |
1-1/2 |
|
DR-1555 |
DH-1575 |
3/4- 16 UNF |
1-1/2 |
|
DR-1556 |
DH-1576 |
8- 9 UNC |
2 |
|
DR-1557 |
DH-1577 |
7/8- 14 UNF |
2 |
|
DR-1558 |
DH-1578 |
1- 8 UNC |
2 |
|
DR-1559 |
DH-1579 |
1- 12 UNF |
2 |
| Counterbalanced to get smoother finishes. | |
| Made of Hardened Steel. | |
| Shiny Black Finish. | |
| Sets supplied on wooden Stand. |
|
Art No:- 451 |
| Cat No. | Head Dia | Shank Size | Tool BIT Size | |||
| Inch | mm | Inch | mm | Inch | mm | |
| FCHS-1601 | 3/4 | 19 | 1/2 | 12.7 | 3/16 | 4.5 |
| FCHS-1602 | 1-1/8 | 28 | 1/2 | 12.7 | 1/4 | 6.0 |
| FCHS-1603 | 1-1/2 | 38 | 1/2 | 12.7 | 5/16 | 8 |
| FCHS-1604 | 1-1/2 | 38 | 3/4 | 19 | 5/16 | 8 |
| FCHS-1605 | 2 | 50.8 | 3/4 | 19 | 5/16 | 8 |
| FCHS-1606 | 2-1/2 | 63.5 | 3/4 | 19 | 5/16 | 8 |
| Hardened and Precision Ground Steel Vise | |
| Positive download and rapid positioning notches for free Jaw movement. | |
| Threaded hole on both sides of stationary Jaw | |
| Horizontal and vertical V in moveable Jaw. |
| Cat No. |
Jaw Width |
Jaw Depth |
Jaw Opening |
Total Length |
||||
| Inch | mm | Inch | mm | Inch | mm | Inch | mm | |
| TMTV-1904 | 1 | 25 | 3/4 | 19 | 2 | 50 | 4 | 100 |
| TMTV-1905 | 2 | 50 | 1-1/16 | 30 | 3-1/8 | 80 | 6 | 150 |
| TMTV-1906 | 3 | 75 | 1-3/8 | 35 | 3-3/4 | 95 | 7 | 175 |
| TAP WRENCHES RETCHED -TYPE | ||
| Article No :- 372 | ||
| High quality Tap Wrenches for Hand Tapping, drilling and Reaming | ||
| Shiny ground finish | ||
| Jaws are hardened and Tempered | ||
| Knurled chuck sleeve | ||
| Jaws are replaceable and self Equalizing. | ||
| Available in Ratchet type. | ||
| Accurately and quickly locates center on round work piece. | |
| For execution place the tool in drill chuck or collet and line up pointer with line scribed on shaft. |
We are the Manufacturers & exporters of a wide variety of "Drill Chuck Arbors". Some of the standard Drill Chuck Arbors are : TAPER SHANK, THREADED, STRAIGHT SHANK.
| | Precision Ground to Master Gauges |
| | |
| | Made of high quality tool steel. |
| | |
| Guaranteed finest Possible accuracy and fit. | |
| Individually Packed. |
| We are the Manufacturers & exporters of a wide variety of "Degree Protractors". Some of the standard Degree Protractors are: | |||||||||||||||||||
|
| Versatility of cutting in any direction | |
| Built in Chip Breaker Groove. Ready to use | |
| No. Grinding - No Tool Resetting. Economical Alternative to Brazed Tool Tips. | |
| Supplied without Inserts. |
| Removes burrs from small Holes | |
| Enlarges and Countersinks holes in soft metals. | |
| Handy Tool for Mechanics, Electricians, Plumbers | |
|
Article No :- 409 |
|
Cat No. |
Range |
|
|
Inch |
mm |
|
|
TR-1458 |
1/8 to 1/2 |
3.0 to 12.5 |
|
TR-1459 |
1/8 to 5/8 |
3.0 to 16.0 |
|
TR-1460 |
5/32 to 7/8 |
4.0 to 22.0 |
| For accurately locating working Points on Drill Presses, Lathes, Milling and other Machines. | |
| Set consists of Snap in Holder, Needle Point attachment, Ball contact attachment, Disc contact attachment and Off Set Indicator Holder. | |
| Available in attractive Plastic Pouch |
| Manufactured from Precision ground tool steel. | |
| Useful for accurate locally working edges like shoulders, centering Points and Scribed lines |
| Tips are heat treated. | ||||
| Spring nut for quick and positive adjustment. | ||||
| Made from Carbon Steel | ||||
|
Article 106 |
Article 107 | Article 108 |
| Cat No | Cat No | Cat No | Size | |
| Divider | Inside | Outside | Inch | mm |
| DS-151 | CI-162 | CO-173 | 4 | 100 |
| DS-152 | CI-163 | CO-174 | 6 | 150 |
| DS-153 | CI-164 | CO-175 | 8 | 200 |
| DS-154 | CI-165 | CO-176 | 10 | 250 |
| DS-155 | CI-166 |
CO-177 |
12 |
300 |
| DS-156 | CI-167 |
CO-178 |
16 |
400 |
| DS-157 | CI-168 |
CO-179 |
18 |
450 |
| DS-158 | CI-169 |
CO-180 |
20 |
500 |
| DS-159 | CI-170 |
CO-181 |
24 |
600 |
| DS-160 | CI-171 |
CO-182 |
36 |
900 |
| DS-161 | CI-172 |
CO-183 |
40 |
1000 |
| Accurately and quickly locates center on round workpiece. | |
| For execution place the tool in drill chuck or collet and line up pointer with line scribed on shaft. | |
| Used for Producing Center holes in Components or Work pieces which requires machining between Centers. | |
| 60 Countersink Angle fits all Standard Centers | |
| Plain type available in 60, 82, or 90Angle, also available with standard and Long Lengths | |
| Made from High Speed Steel |
|
Article No :- 403 |
| Cat No |
Size |
Body Dia. |
Drill Dia. |
Overall Length |
|
A |
D |
L |
||
| SFC - 1336 |
00 |
1/8 |
.025 |
1-1/8 |
| SFC - 1337 |
0 |
1/8 |
1/32 |
1-1/8 |
| SFC - 1338 |
1 |
1/8 |
3/64 |
1-1/4 |
| SFC - 1339 |
2 |
3/16 |
5/64 |
1-7/8 |
| SFC - 1340 |
3 |
1/4 |
7/64 |
2 |
| SFC - 1341 |
4 |
5/16 |
1/8 |
2-1/8 |
| SFC - 1342 |
4-1/2 |
3/8 |
9/64 |
2-1/2 |
| SFC - 1343 |
5 |
7/16 |
3/16 |
2-3/4 |
| SFC - 1344 |
6 |
1/2 |
7/32 |
3 |
| SFC - 1345 |
7 |
5/8 |
1/4 |
3-1/4 |
| SFC - 1346 |
8 |
3/4 |
5/16 |
3-1/2 |
| SFC - 1347 |
9 |
7/8 |
11/32 |
3-5/8 |
| SFC - 1348 |
10 |
1 |
3/8 |
3-3/4 |
|
NOTE: Please mention the angle while ordering. |
||||
| Designed for Machine use and light, portable work | |
| Ideal for Chamfering, Debarring and Counter Sinking | |
| Single Flute construction and low controlled relief provide chatter less operation and smooth surface finish | |
| Versatility of this tool should increase productivity on all general purpose applications | |
| Available in 60, 82 or 90 | |
| Made from High Speed Steel |
| Taps are used for cutting internal threads in holes. | |
| High quality threads. | |
| Manufactured from High Quality Carbon Steel. |
| Basic tool for machinist and toolmakers for accurately scribing lines, transferring measurements and probing during inspection work. | |
| Polished and hardened Steel base with double ended scriber. | |
| Polished and hardened Steel base with double ended scriber. | |
| Front Recessed for depressing Spindle below base level. | |
| Has fine Adjustment for precise angular movement. | |
| Base has 2 retractable Pins to set against edge of a Surface plate. | |
| 1/4" (6.35 mm) hole drilled on adjustment knob for positioning a dial indicator. |
| Article No :- 171 |
| Cat. No. |
Base Dimension L / W / H |
Length of Spindle |
Diameter of Spindle |
|||
| INCH | MM | INCH | MM | INCH | MM | |
|
SMB-401 |
2-3/16 x 1-5/8 x ¾ |
55 x 40 x 20 |
4 & 7 |
100 & 175 |
1/4 |
6.35 |
|
SMB-402 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
9 & 12 |
225 & 300 |
3/8 |
9.5 |
|
SMB-403 |
4 x 3-1/2 x 1-1/8 |
100 x 90 x 30 |
12 & 18 |
300 & 450 |
3/8 |
9.5 |
|
SMB-404 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
9 |
225 |
3/8 |
9.5 |
|
SMB-405 |
3-1/4 x 2-1/2 x 1 |
82 x 63 x 25 |
12 |
300 |
3/8 |
9.5 |
| Sturdy construction surface gage | |
| Consists of Adjusting knob and hardened scriber. | |
| Round base made of close grain Cast Iron. | |
| Very useful for every workshop |
| Article No :- 172 |
| Cat. No. | Height | Base Diameter | ||
| INCH | MM | INCH | MM | |
| SMBR-406 | 12 | 300 | 3-1/8 | 80 |
| SMBR-407 | 20 | 500 | 3-1/8 | 80 |
| All sides are Ground Square and Parallel to each other. | |
| Vs are central, Parallel and square and are matched in Pairs. | |
| Made of Properly Heat treated and Hardened Tool Steel. | |
| Precision Made for Machinists and Toolmakers use. | |
| Supplied in Pairs with two Clamps |
| With one magnetic phase light duty with standard clamp | |
| Compact and small Universal Permanent Magnetic Stand | |
| Includes Disc on bottom for free magnet when not in use |
| Double ended one piece boring bar have 90 & 45 degree Sq ends. | |
| Boring bar are also supplied in sets. |
| High quality tool for Hand tapping operations | |
| Hardened and Tempered Jaws | |
| Smaller sizes available in die Cast or drop forged design | |
| Larger sizes above 1? available in steel casting. |
|
Article No :- 375 |
| Cat No. | Tap Capacity Inch | Overall Length | |
| Inch | Inch | mm | |
|
THA-1213 |
1/16 - 1/4 |
7 |
180 |
|
THA-1214 |
1/16 �3/8 |
9 |
235 |
|
THA-1215 |
5/32 �1/2 |
11 |
280 |
|
THA-1216 |
5/32 �/4 |
15 |
380 |
|
THA-1217 |
1/4 -1-1/8 |
19 |
480 |
|
THA-1218 |
3/4-1-1/2 |
40 |
1015 |
|
THA-1219 |
1�-1/2 |
54 |
1370 |
| Magnetic Base elbow joint flexible arm with two magnetic phase. | |
| Includes ON/OFF Switch and Central locking knob to tighten both arms | |
| Dial Gage Holder includes fine adjustment. |
We are the Manufacturers & exporters of a wide variety of "Steel Squares".
Some of the standard Steel Squares available are:
| STEEL SQUARES A-GRADE | ||
| ||
| | ||
| STEEL SQUARES A-GRADE & WORKSHOP GRADE |
| Article No :-101 |
| Madeof Finest quality ground steel with heavy thick stock. | ||
| Blade is hardened and Ground for straightness and Parallelism. | ||
| Squares are accurate both inside and outside | ||
| Sizes 18" (450mm) and above are supplied in finished wooden box. | ||
| Effective Blade length measured from inner edge of the beam to end of the blade and is approximately 1/4" (6mm) more than sizes shown. |
| Made of Heavy Cast Steel. | |
| Adjustable Screw and tilting Swivel head | |
| Has One inch (25 mm) adjustment | |
| A shop tool with hundreds of uses. |
