Gaskets #1874843

A Non Asbestos Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Non Asbestos Gasket are used in a wide range of applications from pipe flange, heat exchanger, compressor and bonnet valve gaskets to name just a few. A soft gasket can be selected from a large variety of Rubbers, PTFE, Graphite, and Compressed Asbestos & Non-Asbestos sheet products. We can supply Soft Gasket Materials & Gaskets made out of following soft gasket materials

• PTFE Sheet
• Flexible Graphite Sheet
• Rubber of all grades, Cloth Inserted Rubber & Metal
• Inserted Rubber Gaskets.
• Ceramic Fiber / Glass Fibre
• PTFE Envelope Gaskets
• Vegetable Fiber Sheet
• Asbestos & Non-Asbestos Sheet

We are one of the well-known Manufacturers and Exporters of Rubber Gaskets in the market. Our Rubber Gaskets carries a large, diversified and extensive inventory of rubber sheet material in our large, modern facility for the in-house production, custom seals and parts. If you already have a set of pre-determined specifications (in the form of a drawing, print, or AutoCAD Version 14 DXF file), the company has the in-house capability and experience to flat cut or die cut the rubber sheet material to your tolerances. We provide these Rubber Gaskets at the best market prices. Our Rubber Gaskets are made by using the best quality raw materials. For all your rubber sheet materials & Gasket needs, whether its custom gaskets, custom seals or other parts in any size, shape or configuration, call or email Goodrich Gasket Other Information :The available stock of rubber sheet material currently available with us includes :

• White FDA Nitrile
• Thiokol
• Hypalon®
• Butyl
• Red Rubber (SBR)
• Cloth Inserted Rubber
• Diaphragm
• Silicone
• EPDM (Ethylene Propylene Dimonomer)
• Buna-N Nitrile
• Neoprene
• Fluroelastomer
• Bridge Pads
• Coated Fabrics

It is moulded with PTFE Gasket and has good chemical resistance and high electrical property. Widely used as insulating parts and sealing in chemical, electrical, etc. Details

• Diameter : 4 mm ½ 200 mm,
• Density : 2.1 ½ 2.3g/cm³
• Tensile strength : ¥15Mpa,
• Ultimate elongation : ¥150%
• Dielectric strength : ¥10KV/MM

Spiral Wound Gaskets are extremely popular and widely used. A Spiral Wound Gasket is manufactured by spirally winding a performed metal strip and filler on the outer periphery of metal winding mandrels. The winding mandrel outside diameter forms the inner diameter of the Gasket and superposed metal and non-metallic windings are continually wound until the required outer diameter is attained. This engineered product is tailor made to be compatible with the flange closure in which it is to be used. They can be used over the complete temperature range from cryogenic to approximately 2000º degrees Fahrenheit. This type Gasket can be used in all pressures from vacuum to the standard 2500 PSI flange ratings. They are more resilient than any other type of metallic Gasket with the exception of pressure sealing metal Gaskets and, as a consequence, can compensate for flange movement that may occur due to temperature gradients, variations of pressure and vibration. We are one of the best Spiral Wound Gaskets Manufacturers and Exporters in the market. We provide the clients with the best Spiral Wound Gaskets at best prices. Highlights :

• Available in various other types
• Reasonably priced
• Durable
• Superior quality raw material used

We are one of the trusted Manufacturers and Suppliers of Metal Bonded Rubber Gaskets in the market. These Metal Bonded Rubber Gaskets, available with us, are made from our finest rubber compounds and quality metal. We have many years of experience for making Rubber and Metal Bonded Rubber Gasket. We produce all Metal Bonded Rubber Products, including Metal Bonded Rubber Gasket, Seals, Cover and other parts. Besides this, we can also make metal bonded with any rubber material like Nitrile, silicone, EPDM, Viton, etc. With us, the clients can avail reasonably priced Metal Bonded Rubber Gaskets and we deliver our products within the stipulated timeframe.

We are one of the trusted Manufacturers and Exporters of Ring Joint Gaskets in the market. The Ring Joint Gaskets that we provide are made by using optimum quality raw material and have been always appreciated for their high quality. Ring Joint Gaskets are manufactured in accordance with API-6A, API-17D and ASME B16.20 specifications. We offer these Ring Joint Gaskets at the most affordable prices. Specifications :

• RTJ's have "R, RX and BX" numbers assigned to them for pipe size and pressure class identification.
• Stock materials include Soft Iron, Low Carbon Steel, F5, F11, F9, 304, 304L, 316, 316L, 321, 347, DUPLEX, Monel, NICKEL, 410, Inconel and Incoloy.

We are one of the trusted Manufacturers and Exporters of API Ring Joint Gaskets in the market. The API Ring Joint Gaskets that we provide are made by using optimum quality raw material and have been always appreciated for their high quality. API Ring Joint Gaskets are manufactured in accordance with API-6A, API-17D and ASME B16.20 specifications. We offer these API Ring Joint Gaskets at the most affordable prices. Specifications :

• RTJ's have "R, RX and BX" numbers assigned to them for pipe size and pressure class identification.
• Stock materials include Soft Iron, Low Carbon Steel, F5, F11, F9, 304, 304L, 316, 316L, 321, 347, DUPLEX, Monel, NICKEL, 410, Inconel and Incoloy.

All gaskets that are used in Heat Exchangers are called Heat Exchanger Gaskets. The type of Gaskets to be used depends upon the operating conditions of the exchanger. Heat Exchanger Gaskets can come in different types like Double Jacketed, Single Jacketed, Solid Metal, Solid Corrugated Metal Jacketed, Kammprofile or Spiral Wound. Soft compressible material can also be used, like Rubber, PTFE or Non-Asbestos Compressed sheet type. Double Jacketed Gaskets are the most popular Heat Exchanger Gaskets. We are one of the best Manufacturers and Exporters of Heat Exchanger Gaskets in the market. Highlights :

• Reasonably priced
• Durable
• Strong
• Superior quality raw material used

Double Jacketed Gaskets, offered by us, are highly appreciated for their durability and strength. These Double Jacketed Gaskets are available with us at the most affordable prices. We stand tall in being a leading Manufacturer and Exporter of Double Jacketed Gaskets in the market. We manufacture these Double Jacketed Gaskets by using state-of-the-art technology such as CAD & CAM. Features :

• The filler material is completely enclosed by a two piece metal jacket, which covers both the inside and outside diameters and both contact surface
• Double Jacketed Gasket can be with or without Corrugation.

Highlights :

• Superior quality
• Strong make
• Durable
• Reasonably priced

Extensively manufactured at Goodrich Gasket Pvt. Ltd. using quality tested rubber are Nitrile Rubber Gaskets perfect for use with oils, fats, fuels, and other liquids infected by these and are utilized at a range of temperatures (-400C to +1200C depending on grade). The gaskets are appreciated for outstanding resistance to petroleum products as well as compression set, tear and abrasion resistance.

Spiral Wound Gaskets (SPW Gaskets):- At Goodrich Gasket, we manufacture Spiral wound gaskets by spirally winding a preformed metal strip and filler on the outer periphery of metal winding mandrels whose outside diameter form the inner diameter of the gasket and superposed metal and non-metallic windings are continually wound until the required outer diameter is attained. Compatible with the flange closure in which it is to be used, spiral wound gaskets can be used over the complete temperature range from cryogenic to approximately 2000 degrees Fahrenheit and in all pressures from vacuum to the standard 2500 psi flange ratings making it a high pressure and high temperature gasket. They are more resilient than any other type of metallic gasket with higher flexibility and recovery characteristics to maintain a seal under variable working conditions.

The Corrugated Metal Graphite Gasket that we provide is highly appreciated for its high quality including features like strength and durability. This Corrugated Metal Graphite Gasket is manufactured with a corrugated metal as core with flexible graphite sheet adhered to both gasket faces. This type of Corrugated Metal Graphite Gasket makes an excellent product for both standard flange gaskets and heat exchanger type gaskets where there is low bolt load or high available gasket stresses. Highlights :

• High seal ability
• Conformity where low bolt load is available
• Maintains high bolt loads, upon re-tightening, in heat exchanger applications
• Heavy gauge corrugated insert for support
• Choice of insert metals

We are counted among the best Manufacturers and Exporters of Single Jacketed Gaskets in the market. The Single Jacketed Gaskets that we provide are made by using high grade raw materials. The filler material is enclosed in a metal jacket which covers the inside and outside diameter of the gasket. With us the clients can avail these gaskets at the most reasonable price range. Single Jacketed Gaskets are widely used in a number of industrial and mechanical applications. Highlights :

• Well designed
• Available in a variety of shapes and sizes
• Durable
• Made by using superior quality raw materials

We are one of the foremost Manufacturers and Exporters of Metal Reinforced Gasket in the market. A Metal Reinforced Gasket is a rigid laminated gasket consisting of soft layers bonded to each face of a solid metal core by a high temperature/chemical resistant synthetic bonding agent. While the solid metal core prevents gasket blowout, it provides high strength and rigidity and the soft facings provide an exceptional seal. The soft facing material flows easily into the flange faces allowing a high integrity seal, even under low applied seating stresses. The metal core material is selected to suit the application design conditions and the media to be sealed. A wide range of core materials are available, from the relatively low cost carbon steels, through the range of stainless steels and up to the "exotic" alloys. For chemical resistance and temperature stability purposes, the correct core material must always be selected. We provide the clients with the best quality Metal Reinforced Gasket in the market. These Metal Reinforced Gaskets are available with us at the most affordable prices. Specifications :

• The soft gasket facings can be Flexible Graphite, PTFE, Compressed fiber gasket material. However, Flexible Graphite is the standard and most widely used facing material supplied with the Metal Reinforced Gasket.
• Suitable up to pressure Class 300, the Metal Reinforced Gaskets are widely used in the chemical and petrochemical industries, where a high temperature/corrosion resistant, high integrity joint is required.
• Standard core material is stainless steel (grade 316), and standard core thickness is 1/8".

RING TYPE JOINT GASKETS (RTJ):-Ring joint gasket is a high integrity sealing gasket, high temperature and high pressure gasket for applications in petroleum industry, oilfield drilling, pressure vessels joints, pipes and valves etc from Goodrich Gasket Pvt. Ltd.Goodrich Gasket manufactures ring joint gaskets according to API 6A and ASME B16.20 for numerous industrial applications based on the customer required specifications with corrosive protection using electroplated zinc or alternate material coating of up to 0.0003 thickness. As a result of metal to metal sealing media they are made to be free of indentations, tool marks etc and have a surface finish of maximum R, RX 63microinches Ra (1.6 micrometer Ra).BX -- 32microinches Ra (0.8 micrometer Ra). The working of ring joint gaskets can be explained by the axial compressive load causing them to deform and flow to irregularities in the flange grooves that it seals. As load bearing area of ring joint gaskets are small high surface stresses are produced between the sealing face and the groove, making it poor in recovery characteristics and unfit for reuse. Goodrich Gasket manufactures Type R, RX, BX ring joint gaskets in API 6A, ASME B16.20 gasket standards for API 6B, ASME B16.5 and API 6BX flanges respectively. Types R, RX operates in 6250 psi/ 5000 psi with oval or octagonal gasket orientation and interchangeability.Type RX has a pressure passage hole for pressure equalization on each sealing face sides. TYPE R OVAL TYPE RX TYPE R OCTAGONAL Type BX operates in 20, 000 psi with non interchangeability. Type BX has a pressure passage hole for pressure equalization on each sealing face sides.TYPE BX Derived from RX, BX are SRX, SBX in accordance with API 17D standards for usage in applications like subsea well heads etc. TYPE SBX Ring joint gaskets are designed to be softer than flange grooves so as on compression the gasket plastically deforms and not the grooves.

Compressed Non Asbestos Fiber Gaskets are circle cut or die cut gaskets from compressed non asbestos jointing, manufactured from carefully picked fiber intimately blended with suitable heat resistant binders and vulcanized into sheets of homogenous compositions and uniform thickness. RAISED FACE FULL FACE Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting fiber, heat-resisting packing material and special rubber compound by heating and compression molding it. These are used in high temperature and high pressure gasket applications like equipments involving saturated vapor, super hot vapor, gas, air, ammonia alkali, and inert gases and other mediums and used as sealing material in the joints of pipeline. Goodrich Gasket offers Type AF 111, 120, 139, 154, 159, 160 in the compressed non asbestos fiber types.