Ludhiana, Punjab, India
GST : 03AAVPG4261E1ZV
Verified
Add Review
Our Products
We are offering Dehulling Equipment that can remove hulls from the harvested seeds.
Features :
Goyum Pressure Type Destoners are used for removing impurities from the oil seeds / nuts
FEATURES :
Note : Capacity Approximate on wheat basis. It varies considerately depending of material ans its quality.
A decorticator is a machine for stripping the skin, bark, or rind off nuts, wood, plant stalks, grain, etc. in preparation for further processing.
The grains or whole groundnuts etc will be passed through the hardened knives fitted on a rotating disc which peels sensitively the surface further the Vibration system isolates the shells, Skin etc and leaving kernel / meat for next step of operation.
Hammer Mill is used for breaking Seeds, Copra (Coconuts) and Seed Cake / Meals from larger into smaller pieces. As the density of smaller pieces is larger, the capacity of Oil Press / Oil Expeller increases and also percentage of extracted oil.
FEATURES :
Features :
Copra Dryer is mainly used to dry either wet copra and semi dried copra to make it suitable for extraction of Oil. The dried copra facilities to extract the oil at faster rate and helps to get oil drained. The drier will reduce the moisture from 40% to 7% and also at various moisture levels
The driers are of direct conduction driers, convection driers by Hot Air Radiators and or direct combustion flue gas driers for faster reduction of moisture. These driers are available on various capacities and designed, engineered and manufactured as per customer requirement. Special tailor made dryers could also be manufactured.
Features :
Goyum offers all kind of Vertical Pressure Leaf Filter for filtration of liquids & Specially Edible Oil with suspended solid contents upto 7%.
Features :
Single or Multi micro bag polishing filters are basically used for final filtration. The baskets are housed in Vessel with proper sitting type arrangements.
Features :
The efficient range of vibro separator is facilitate with vertical type special motor to carry on the three dimensional composed circular and elliptic motions in vertical, horizontal and inclinational faces. It is a type of separating machine which achieves superior performance dispersing the feed (Crude Oil) from the center equally; hence utilizing all parts of screen cloth.
Technical Data
| Model | Screen Diameter | Power |
|---|---|---|
| GSP–24 | 24” | 0.5 HP |
| GSP–30 | 30” | 0.5 HP |
| GSP–36 | 36” | 0.5 HP |
| GSP–48 | 48” | 1.5 HP |
| GSP–60 | 60” | 1.5 HP |
GOYUM is a manufacturer, supplier & exporter of Fish Feed Plant. Offered in various capacities and other related specifications as per our customer requirements.
Depending upon the daily feed requirement, we design the suitable capacity Plants with Auto-Batching & Auto Bagging.
For any requirement of fish feed making plant setup or would like to get a customized fish feed processing project plan, feel free to contact us !!
Our sales team will provide you equipment and cost details and help on feed milling process design layout, equipment selection, Installation & commissioning and plant operation training.
Process Flowchart
GOYUM is a manufacturer, exporter & supplier of MSW SHREDDER.
GOYUM Shredders comes in Dual Shaft Shredding System and are ideal solution for MSW (Municipal Solid Waste), Industrial Waste, Metal, Wood, Paper, Tires / Tyres, Plastic, PET Bottle, etc.
Features :
Technical Specification
| Model | Motor | Capacity |
|---|---|---|
| GOYUM 30 | 50 HP (2 Motor Required) | 2 – 3 Tons/Hour |
| GOYUM 60 | 60 / 75 HP (2 Motor Required) | 5 Tons/Hour |
| GOYUM 90 | 120 HP (2 Motor Required) | 20 -25 Tons/Hour |
GOYUM is a manufacturer, exporter & supplier of Jambo Bag, Plastic Waste Shredder.
GOYUM Shredders comes in Dual Shaft Shredding System and are ideal solution for Jambo Bag, Plastic Waste Shredder.
Features :
Technical Specification
| Model | Motor | Capacity |
|---|---|---|
| GOYUM 30 | 50 HP (2 Motor Required) | 2 – 3 Tons/Hour |
| GOYUM 60 | 60 / 75 HP (2 Motor Required) | 5 Tons/Hour |
| GOYUM 90 | 120 HP (2 Motor Required) | 20 -25 Tons/Hour |
GOYUM is a manufacturer, exporter & supplier of EFB Waste Shredder.
GOYUM Shredders comes in Dual Shaft Shredding System and are ideal solution for EFB Waste.
Features:
Technical Specification
| Model | Motor | Capacity |
|---|---|---|
| GOYUM 30 | 50 HP (2 Motor Required) | 2 – 3 Tons/Hour |
| GOYUM 60 | 60 / 75 HP (2 Motor Required) | 5 Tons/Hour |
| GOYUM 90 | 120 HP (2 Motor Required) | 20 -25 Tons/Hour |
GOYUM is a manufacturer, exporter & supplier of Double Shaft Industrial Shredder
GOYUM Shredders comes in Dual Shaft Shredding System and are ideal solution for MSW (Municipal Solid Waste), Industrial Waste, Wood Waste, Paper Waste, Tires / Tyres Waste, Plastic Waste, PET Bottle Waste, etc.
Features :
Technical Specification
| Model | Motor | Capacity |
|---|---|---|
| GOYUM 30 | 50 HP (2 Motor Required) | 2 – 3 Tons/Hour |
| GOYUM 60 | 60 / 75 HP (2 Motor Required) | 5 Tons/Hour |
| GOYUM 90 | 120 HP (2 Motor Required) | 20 -25 Tons/Hour |
GOYUM is a manufacturer, exporter & supplier of Double Shaft Industrial Shredder
GOYUM Shredders comes in Dual Shaft Shredding System and are ideal solution for MSW (Municipal Solid Waste), Industrial Waste, Wood Waste, Paper Waste, Tires / Tyres Waste, Plastic Waste, PET Bottle Waste, etc
Features :
Technical Specification
| Model | Motor | Capacity |
|---|---|---|
| GOYUM 30 | 50 HP (2 Motor Required) | 2 – 3 Tons/Hour |
| GOYUM 60 | 60 / 75 HP (2 Motor Required) | 5 Tons/Hour |
| GOYUM 90 | 120 HP (2 Motor Required) | 20 -25 Tons/Hour |
We are manufacturer & exporter of Automatic Soybean Extruder Machine It is available in various specifications as per the varied needs of the clients. It is highly demanded in oil mill industries. Offered machine is manufactured using superior quality components and the most-advanced.
Features :
A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under pressure is then usable for transferring the heat to a process. Water is a useful and cheap medium for transferring heat to a process.
The boiler system comprises of: feed water system, steam system and fuel system. The feed water system provides water to the boiler and regulates it automatically to meet the steam demand. Various valves provide access for maintenance and repair. The steam system collects and controls the steam produced in the boiler. Steam is directed through a piping system to the point of use. Throughout the system, steam pressure is regulated using valves and checked with steam pressure gauges. The fuel system includes all equipment used to provide fuel to generate the necessary heat.
We are offering energy efficient Steam Boilers in different sizes and capacities which are easy to install and assemble. These boiling systems deliver vital contribution in the whole oil making process by providing the necessary steam needed by heating kettles to heat the oil seeds. These steam boilers are available in Horizontal Boiler (IBR) in capacity of 1 TPH - 40 TPH.
Applications :
Horizontal Steam Boiler are used for steam generating purposes in Oil Mills, Refinery Plants, Solvent Plants, Feed Plant, etc
Boiler are available in following Types and Capacities :
We are offering energy efficient Steam Boilers in different sizes and capacities which are easy to install and assemble. These boiling systems deliver vital contribution in the whole oil making process by providing the necessary steam needed by heating kettles to heat the oil seeds. These steam boilers are available in different finish specifications with available choices including Vertical Boiler (Non IBR) in capacity of 50 Kg to 900Kg Per Hour, Horizontal Boiler (IBR) in capacity of 1 TPH - 40 TPH as well as Wood, Husk and Oil Fired boilers.
Boiler are available in following Types and Capacities :
We are manufacturer & exporter of waste tyre pyrolysis plants with 5 - 10TPD processing capacity. Pyrolysis plant is an industry that converts scrap tyres into Pyrolysis Oil, Carbon Black, Scrap Steel and Hydrocarbon Gas. The plant is manufactured using high quality material, is highly durable and has high performance level. To manufacture these plants, we make use of quality-approved components that are source from certified vendors.
Features :
During the process different vacuum values are applied in pre determined temperatures and in different phases, different gases are obtained and the condensed gas is stored as fuel - oil in tanks.
Cashew Nut Shell Liquid Oil Extraction Machine is used to extract oil from various types of edible oil seeds as well as non-edible oil seeds & nuts.
This Oil Extraction Machine comes with Round Kettle / Cooker for Export Market.
Features:
| Bodies and Base | Fabricated from Mild steel |
| Gearbox | Double Reduction Gearbox with Helical Gears of Cast Steel and Pinions of Alloy Steel |
| Chamber | Material: Cast Steel. Vertically fitted Feed End: - Size: Ø 9" x 24" Long, Discharge End: - Size: Ø 7" x 36" Long |
| Worm Assembly | Heat Treated in Feed Side Chamber and Hard Face welded in Discharge Side Chamber |
| Main Worm Shaft | Can be withdrawn out without Disturbing the Gear Box. |
| Round Kettle | 3 or 4 stages with Steam Jackets of Ø 48” for efficient cooking of Seed. Pipe Fitting Contains Safety Valve, Steam Spray Pipe, Pressure Gauge, Steam Valves & Steam Traps. (Long Kettle provided as per requirement) |
| Cake Thickness | Can be Adjusted on Running Machine. |
| Crammer Shaft | For extra Cramming of the Seed or Cake in the Feed Body. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Crushing capacity | Differs with the density of oilseeds & nuts and quantity of oil in it. |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 15 – 20 days, but confirmed delivery time will be provided at the time of confirmation.
Technical Specification
| Model | Capacity | Motor Power | Length | Breadth | Height |
|---|---|---|---|---|---|
| GOYUM 150 | 15 – 20 TPD* | 3 Phase 40 HP for Expeller 3 Phase 7.5 HP for Kettle | 8.66 ft | 6.33 ft | 12.16 ft |
Oilseed Crushing Machine is used to extract oil from various types of edible as well as non-edible oil seeds & nuts.
Features:
| Bodies | Material: Cast Iron |
| Gearbox | Double Reduction Gearbox of Cast Iron body with Mild Steel Spur Gear and Bevel Gear Set |
| Chamber | Steel Fabricated from Mild Steel Plates of Four Sections. Horizontally fitted. Size: Ø7” X 44” Long, |
| Worm Assembly | Case Hardened with Cone Point |
| Main Worm Shaft | Can be drawn out without disturbing the Gearbox. |
| Cake Thickness | The Machine needs to be stopped for adjusting the Cake Thickness. |
| Kettle | Three or Four Stagewith Steam Jackets for efficient cooking of Seed. Pipe Fitting contains all the Required Accessories |
| Crammer Shaft | For Extra Cramming of the seed or cake in the feed body. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Crushing Capacity | Differs with the density of oilseeds & nuts and quantity of oil in it. |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 15 – 20 days, but confirmed delivery time will be provided at the time of confirmation.
Technical Specification
| Model | Capacity | Motor Power | Length | Breadth | Height |
|---|---|---|---|---|---|
| GOYUM MK-V-C | 20 TPD* | 3 Phase 50 HP Motor for Expeller 3 Phase 5 HP Motor for Kettle | 11.48 ft | 4.26 ft | 11.81 ft |
*(TPD stand for Ton Per Day of Oilseed Crushing Capacity. Further crushing capacity may differ with the density of oilseeds & nuts and quantity of oil in it.)
OIL EXTRUDER MACHINE is used to extract oil from various types of edible as well as non-edible oil seeds & nuts.
Features:
| Bodies | Material: Cast Iron |
| Gearbox | Double Reduction with Mild steel Helical Gears and Pinions |
| Chamber | Steel Fabricated of Three Sections. Horizontally fitted |
| Worm Assembly | Case Hardened |
| Feeding Drum | Single Stage. With & Without Heating Arrangement (as required). |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Crushing capacity | Differs with the density of oilseeds & nuts and quantity of oil in it. |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 15 – 20 days, but confirmed delivery time will be provided at the time of confirmation.
Technical Specification
| Model | Capacity | Motor Power | Length | Breadth | Height |
|---|---|---|---|---|---|
| GOYUM 60 | 5 – 6 TPD* | 20 HP | 9.51 ft | 3.15 ft | 7.05 ft |
*(TPD stand for Ton Per Day (in 24 Hours) of Oilseed Crushing Capacity. Further crushing capacity may differ with the density of oilseeds & nuts and quantity of oil in it.)
Oil Pressing Machine is used to extract oil from various types of edible as well as non-edible oil seeds & nuts.
Features:
| Bodies and Base | Fabricated from Mild steel |
| Gearbox | Triple Reduction Gearbox with Helical Gears of Cast Steel and Pinions of Alloy Steel. Aligned with bodies on single fabricated base. |
| Chamber | Material: Cast Steel. Vertically fitted Feed End: - Size: Ø 9" x 36" Long, Discharge End: - Size: Ø 8" x 36" Long |
| Worm Assembly | Hard Face welded along with Discharge Ring and Sliding Ring |
| Main Worm Shaft | Can be withdrawn out without Disturbing the Gear Box. The Shaft is water cooled. |
| Crammer Shaft | For Extra Cramming of the Seed or Cake is fitted on the Feed Body and is driven by 2 H.P. Geared Motor. |
| Round Kettle (Cooker) | 4 Stages with Steam Jackets of Ø 60” for efficient cooking of Seed. Pipe Fitting Contains Safety Valve, Steam Spray Pipe, Pressure Gauge, Steam Valves & Steam Traps. Exhaust Fan is also provided to extract excess steam or moisture from cooking chambers. |
| Cake Thickness | Can be Adjusted on Running Machine. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Crushing Capacity | Differs with the density of oilseeds & nuts and quantity of oil in it. |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 20 – 25 days, but confirmed delivery time will be provided at the time of confirmation of orde
Technical Specification
| Model | Capacity | Motor Power | Length | Breadth | Height |
|---|---|---|---|---|---|
| GOYUM 600 | 50 – 60 TPD* in Pre-pressing 30 – 35 TPD* in Single & Final Crushing | 3 Phase 100 HP for Expeller | 12 ft | 7 ft | 7 ft |
| Cooker/Kettle | -- | 3 Phase 20 HP for Kettle | 7 ft | 7 ft | 12.6 ft |
GOYUM 240 Oil Production Machine is used to extract oil from various types of edible oil seeds as well as non-edible oil seeds & nuts.
This Oil Extraction Machine comes with Round Kettle / Cooker for Export Market.
Features:
| Bodies and Base | Fabricated from Mild steel |
| Gearbox | Double Reduction Gearbox with Helical Gears of Cast Steel and Pinions of Alloy Steel |
| Chamber | Material: Cast Steel. Vertically fitted Feed End: - Size: Ø 9" x 24" Long, Discharge End: - Size: Ø 7" x 36" Long |
| Worm Assembly | Heat Treated in Feed Side Chamber and Hard Face welded in Discharge Side Chamber |
| Main Worm Shaft | Can be withdrawn out without Disturbing the Gear Box. |
| Round Kettle | 3 or 4 stages with Steam Jackets of Ø 48” for efficient cooking of Seed. Pipe Fitting Contains Safety Valve, Steam Spray Pipe, Pressure Gauge, Steam Valves & Steam Traps. (Long Kettle provided as per requirement) |
| Cake Thickness | Can be Adjusted on Running Machine. |
| Crammer Shaft | For extra Cramming of the Seed or Cake in the Feed Body. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Crushing capacity | Differs with the density of oilseeds & nuts and quantity of oil in it. |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 15 – 20 days, but confirmed delivery time will be provided at the time of confirmation.
Technical Specification
|
Model |
Capacity |
Motor Power |
Length |
Breadth |
Height |
|---|---|---|---|---|---|
|
GOYUM 240 |
22 – 25 TPD* |
3 Phase 75 HP for Expeller |
10.13 ft |
3.70 ft |
7.60 ft |
Shea Butter / Shea Nut Oil Extraction Machine is used to extract oil from various types of edible as well as non-edible oil seeds & nuts.
Features:
| Bodies and Base | Fabricated from Mild steel |
| Gearbox | Triple Reduction Gearbox with Helical Gears of Cast Steel and Pinions of Alloy Steel. Aligned with bodies on single fabricated base. |
| Chamber | Material: Cast Steel. Vertically fitted Feed End: - Size: Ø 12" x 36" Long, Middle:Size: Ø 11" x 36" Long, Discharge End: - Size: Ø 10" x 36" Long |
| Worm Assembly | Hard Face welded along with Discharge Ring and Sliding Ring |
| Main Worm Shaft | Can be withdrawn out without Disturbing the Gear Box. The Shaft is water cooled. |
| Crammer Shaft | For Extra Cramming of the Seed or Cake is fitted on the Feed Body and is driven by 3 H.P. Geared Motor. |
| Round Kettle (Cooker) | 5 Stages with Steam Jackets of Ø66” for efficient cooking of Seed. Pipe Fitting Contains Safety Valve, Steam Spray Pipe, Pressure Gauge, Steam Valves & Steam Traps. Exhaust Fan is also provided to extract excess steam or moisture from cooking chambers. Supported separately on fabricated structure |
| Cake Thickness | Can be Adjusted on Running Machine. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Chamber Lifting | Manual |
| Crushing Capacity | Differs with the density of oilseeds & nuts and quantity of oil in it.) |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 25 – 30 days, but confirmed delivery time will be provided at the time of confirmation.
Technical Specifications
| Model | Capacity | Motor Power | Length | Breadth | Height |
|---|---|---|---|---|---|
| GOYUM 1500 | 125 – 150 TPD* in Pre-pressing 45 – 55 TPD* in Single & Final Crushing | 3 Phase 170 HP for Expeller | 16 ft | 4.2 ft | 6.6 ft |
| Cooker/Kettle | -- | 3 Phase 25 HP for Kettle | 7 ft | 7 ft | 12.6 ft |
*(TPD stand for Ton Per Day of Oilseed Crushing Capacity. Further crushing capacity may differ with the density of oilseeds & nuts and quantity of oil in it.)
We are manufacturer & exporter of Copra Oil Mill Plant on turnkey basis. We manufacturer machinery & equipment for Copra Oil Mill Plant by using high quality material and modern technology at our state of the art machining facility. We can also customize these plants as per our valuable client’s requirements.
The Copra Oil Mill Plant is in great demand across various countries where the production of Copra is significant.
Basic equipment / machinery required for the Copra Oil Mill Plant is as under :
The Copra Oil Mill Plant crushing capacity starts from 15 TPD onwards. The Copra Oil Mill Plant is designed, manufactured, supplied and installed & commissioned on turnkey basis.
Are You Looking to Start a New Copra Oil Mill Plant or Further Expansion?
Don’t hesitate to contact us, if you are interested to get a customised quotation with Equipment Details and Prices for Copra Oil Mill Plant
We are manufacturer & exporter of Sunflower Oil Mill Plant on turnkey basis. We manufacturer machinery & equipment for Sunflower Oil Mill Plant by using high quality material and modern technology at our state of the art machining facility. We can also customize these plants as per our valuable client’s requirements.
The Sunflower Oil Mill Plant is in great demand across various countries where the production of Sunflower is significant.
Basic equipment / machinery required for the Sunflower Oil Mill Plant is as under :
The Sunflower Oil Mill Plant crushing capacity starts from 15 TPD onwards. The Sunflower Oil Mill Plant is designed, manufactured, supplied and installed & commissioned on turnkey basis.
Are You Looking to Start a New Sunflower Oil Mill Plant or Further Expansion?
Don’t hesitate to contact us, if you are interested to get a customised quotation with Equipment Details and Prices for Sunflower Oil Mill Plant.
We are manufacturer & exporter of Cashew Nut Shell Liquid / CNSL Oil Mill Plant on turnkey basis. We manufacturer machinery & equipment for Cashew Nut Shell Liquid / CNSL Oil Mill Plant by using high quality material and modern technology at our state of the art machining facility. We can also customize these plants as per our valuable client’s requirements.
The Cashew Nut Shell Liquid / CNSL Oil Mill Plant is in great demand across various countries where the production of Cashew is significant.
Basic equipment / machinery required for the Cashew Nut Shell Liquid / CNSL Oil Mill Plant is as under :
The Cashew Nut Shell Liquid / CNSL Oil Mill Plant crushing capacity starts from 15 TPD onwards. The Cashew Nut Shell Liquid / CNSL Oil Mill Plant is designed, manufactured, supplied and installed & commissioned on turnkey basis.
Are You Looking to Start a New Cashew Nut Shell Liquid / CNSL Oil Mill Plant or Further Expansion?
Don’t hesitate to contact us, if you are interested to get a customised quotation with Equipment Details and Prices for Cashew Nut Shell Liquid / CNSL Oil Mill Plant.
We are manufacturer & exporter of Cashew Nut Shell Liquid / CNSL Oil Production Plant on turnkey basis. We manufacturer machinery & equipment for Cashew Nut Shell Liquid / CNSL Oil Production Plant by using high quality material and modern technology at our state of the art machining facility. We can also customize these plants as per our valuable client’s requirements.
The Cashew Nut Shell Liquid / CNSL Oil Production Plant is in great demand across various countries where the production of Cashew is significant.
Basic equipment / machinery required for the Cashew Nut Shell Liquid / CNSL Oil Production Plant is as under :
The Cashew Nut Shell Liquid / CNSL Oil Production Plant crushing capacity starts from 15 TPD onwards. The Cashew Nut Shell Liquid / CNSL Oil Production Plant is designed, manufactured, supplied and installed & commissioned on turnkey basis.
Are You Looking to Start a New Cashew Nut Shell Liquid / CNSL Oil Production Plant or Further Expansion?
Don’t hesitate to contact us, if you are interested to get a customised quotation with Equipment Details and Prices for Cashew Nut Shell Liquid / CNSL Oil Production Plant.
We are manufacturer & exporter of Oil Production Plant on turnkey basis. We manufacturer machinery & equipment for Oil Production Plant by using high quality material and modern technology at our state of the art machining facility. We can also customize these plants as per our valuable client’s requirements.
Goyum Oil Production Plant is suitable for crushing various oil seeds & nuts such as: Soybean / Soya bean, Cottonseed, Groundnut / Peanut / Earthnut, Palm Kernel, Sunflower Seeds, Shea Nut, Mustard Seeds, Copra / Coconut, Sesame Seeds, Cashew Nut Shell, Rapeseed / Canola Seeds, Neem Seed, Niger Seeds, Castor Seeds, Cashew Nut Shells, Corn Germs, Jatropha Seeds, etc.
Some of the basic equipment / machinery required for Oil Production Plant is as under :
The Oil Production Plant crushing capacity starts from 15 TPD onwards. The Oil Production Plant is designed, manufactured, supplied and installed & commissioned on turnkey basis.
Are You Looking to Start a New Oilseed Production Plant or Further Expansion?
Don’t hesitate to contact us, if you are interested to get a customised quotation with Equipment Details and Prices for Oil Production Plant.
Cooking Oil Extraction Machinesis used to extract oil from various types of edible as well as non-edible oil seeds & nuts.
Features:
| Bodies and Base | Fabricated from Mild steel |
| Gearbox | Triple Reduction Gearbox with Helical Gears of Cast Steel and Pinions of Alloy Steel. Aligned with bodies on single fabricated base. |
| Chamber | Material: Cast Steel. Vertically fitted Feed End: - Size: 12" x 36" Long, Middle:Size: 11" x 36" Long, Discharge End: - Size: 10" x 36" Long |
| Worm Assembly | Hard Face welded along with Discharge Ring and Sliding Ring |
| Main Worm Shaft | Can be withdrawn out without Disturbing the Gear Box. The Shaft is water cooled. |
| Crammer Shaft | For Extra Cramming of the Seed or Cake is fitted on the Feed Body and is driven by 3 H.P. Geared Motor. |
| Round Kettle (Cooker) | 5 Stages with Steam Jackets of 66 for efficient cooking of Seed. Pipe Fitting Contains Safety Valve, Steam Spray Pipe, Pressure Gauge, Steam Valves & Steam Traps. Exhaust Fan is also provided to extract excess steam or moisture from cooking chambers. Supported separately on fabricated structure |
| Cake Thickness | Can be Adjusted on Running Machine. |
| Oil & Oil Cake | Superior Quality |
| Maintenance | Minimum |
| Chamber Lifting | Manual |
| Crushing Capacity | Differs with the density of oilseeds & nuts and quantity of oil in it.) |
Additional Information:
Packaging Details : Wrapped in polythene sheet & then Packed in Quality Wooden Box (For Export)
Delivery Time : 25 – 30 days, but confirmed delivery time will be provided at the time of confirmation.
