• Capacitance Range40 mfd To 500 mfd.
•  Rated Voltage
• 230 Volts RMS.Surge Voltage
• 75 To 350 RMS.Operating Temp.
• -30 To +70 deg CelsiusDuty Cycle
• 20 starts / hour max of 3 sec. durationShelf Life

  In Most Of The Industries, Due To The Fluctuating Load Conditions, The Power Factor Also Varies Accordingly. Hence It Is Practically Difficult To Maintain A Penalty Free Power Factor With Fixed Compensation Of Capacitors. This Results In Low Power Factor And Leads To Higher Kva Demand And P.F. Penalties. Due To Variable Load Conditions And Cumbersome Manual Switching Of Capacitors The Power Factor Can Not Be Maintained At Desired Levels. As Close Monitoring Of Power Factor Is Required All The Time To Avoid Penalties And To Minimize The KVA Demand, Automatic Power Factor Correction Panels Are The Best Solutions. The Panel Are Manufactured Using Micro Controller Based Control Relay To Control The Capacitor Switching. All The Settings Are Done By Finger Tip Key Pad With Options To Select “FIFO” Of “CYCLIC” Order And Many More. The Panels Are Made Based On Study Of Your Load And Perfect Tuning Is Possible To The Requirement Of Your System.   Advantages Of Automatic Power Factor Panels :    Avoids Power Factor Penalties.  Reduces KVA Demand  Avoids Leading Power Factor.  Avoids Over Excitation Of Generators.  Minimizes Line Losses.  Minimizes Transformer Losses.  Protects Motors, Switchgears From  Improves Voltage Conditions.

Being one of the leading names of the Label industry, we are engaged in offering Tags and Label, which are manufactured from optimum quality raw materials. Made available in a varied range of sizes and design patterns, these labels are quiet popular among our valuable customers. The proposed collection of Tag's labels is popular for its smooth finishing, durability and cost effectiveness.

• Capacitance Range2.00 mfd To 100.00 mfd.
•  Rated Voltage
• 230 to 3000 Volts.Temp. Range
• -25 to +85 deg Celsius.Duty Cycle
• ContinuousTollerance
• +/- 5.00 %Frequency

High Voltage Power Capacitors Are Manufactured With Hazy Film, Aluminum Foil And NPCB, Non-Toxic Oil. The Extended Foil Construction With Edge Soldering & End Folding Of Electrode Foil Is Added Feature. Units Up To 200 Kvar Are Offered Giving Benefit Of Kvar To Volume Ratio And Thereby Reducing Installation Cost And Space. High Voltage Power Capacitors are Used For Compensating Transmission Line Losses As Well As For Power Factor Improvement. Each Capacitor Unit Consists Of Number Of Elements In Series Parallel Combination With Internal Fuses. Each Element Is Wound With High Quality Hazy Bopp Film As Dielectric And High Purity Aluminum Foil As Electrode. Extended Foil Construction Is Adopted To Enhance The Life Of Capacitor. Normally The Electrode Material I. E. Aluminum Foil Has Sharp Points At Slit Edge Which Causes High Stress At The Sharp Points Causing Damage To The Capacitor. To Overcome This Phenomenon The Edge Of Aluminum Foil Is Folded Such That No Sharp Points Left Over. This Folding Forms A Ring Named As ‘Corona Ring’. After This, Capacitor Is Impregnated With NON-PCB, NON-TOXIC Bio gradable, Eco Friendly Oil Under Vacuum Which Enhances Life Of Capacitor.

• Reference ISIS 13340 / 1993.
• Output Range1 Kvar to 25 Kvar single units & above 25 Kvar in Banking.
• Working Voltage230 to 1000 Volts  AC.
• No. of PhasesSingle / Three.
• Temp. Category55 Deg. C Max.
• Tolerance0 %  to   + 10 %
• Permitted Over Voltage1.15 Times of rated voltage
• Permitted Over Current1.40 Times of rated current.
• Frequency 50 Hz.
• Losses< 0.50 w / kvar
• CoolingNatural air And Or Oil Cooling.
• Installation Indoor, Floor Mounting
• Life Expectancy75,000 Hrs
• In-rush Current150 times of rated current.

• Capacitance Range40 mfd To 500 mfd.
•  Rated Voltage
• 230 Volts RMS.Surge Voltage
• 75 To 350 RMS.Operating Temp.
• -30 To +70 deg CelsiusDuty Cycle
• 20 starts / hour max of 3 sec. durationShelf Life

• Capacitance Range2.00 mfd To 100.00 mfd.
•  Rated Voltage
• 230 to 3000 Volts.Temp. Range
• -25 to +85 deg Celsius.Duty Cycle
• ContinuousTollerance
• +/- 5.00 %Frequency

• Reference ISIS 13340 / 1993.
• Output Range1 Kvar to 25 Kvar single units & above 25 Kvar in Banking.
• Working Voltage230 to 1000 Volts  AC.
• No. of PhasesSingle / Three.
• Temp. Category55 Deg. C Max.
• Tolerance0 %  to   + 10 %
• Permitted Over Voltage1.15 Times of rated voltage
• Permitted Over Current1.40 Times of rated current.
• Frequency 50 Hz.
• Losses< 0.50 w / kvar
• CoolingNatural air And Or Oil Cooling.
• Installation Indoor, Floor Mounting
• Life Expectancy75,000 Hrs
• In-rush Current150 times of rated current.

  In Most Of The Industries, Due To The Fluctuating Load Conditions, The Power Factor Also Varies Accordingly. Hence It Is Practically Difficult To Maintain A Penalty Free Power Factor With Fixed Compensation Of Capacitors. This Results In Low Power Factor And Leads To Higher Kva Demand And P.F. Penalties. Due To Variable Load Conditions And Cumbersome Manual Switching Of Capacitors The Power Factor Can Not Be Maintained At Desired Levels. As Close Monitoring Of Power Factor Is Required All The Time To Avoid Penalties And To Minimize The KVA Demand, Automatic Power Factor Correction Panels Are The Best Solutions. The Panel Are Manufactured Using Micro Controller Based Control Relay To Control The Capacitor Switching. All The Settings Are Done By Finger Tip Key Pad With Options To Select “FIFO” Of “CYCLIC” Order And Many More. The Panels Are Made Based On Study Of Your Load And Perfect Tuning Is Possible To The Requirement Of Your System.   Advantages Of Automatic Power Factor Panels :    Avoids Power Factor Penalties.  Reduces KVA Demand  Avoids Leading Power Factor.  Avoids Over Excitation Of Generators.  Minimizes Line Losses.  Minimizes Transformer Losses.  Protects Motors, Switchgears From  Improves Voltage Conditions.

High Voltage Power Capacitors Are Manufactured With Hazy Film, Aluminum Foil And NPCB, Non-Toxic Oil. The Extended Foil Construction With Edge Soldering & End Folding Of Electrode Foil Is Added Feature. Units Up To 200 Kvar Are Offered Giving Benefit Of Kvar To Volume Ratio And Thereby Reducing Installation Cost And Space. High Voltage Power Capacitors are Used For Compensating Transmission Line Losses As Well As For Power Factor Improvement. Each Capacitor Unit Consists Of Number Of Elements In Series Parallel Combination With Internal Fuses. Each Element Is Wound With High Quality Hazy Bopp Film As Dielectric And High Purity Aluminum Foil As Electrode. Extended Foil Construction Is Adopted To Enhance The Life Of Capacitor. Normally The Electrode Material I. E. Aluminum Foil Has Sharp Points At Slit Edge Which Causes High Stress At The Sharp Points Causing Damage To The Capacitor. To Overcome This Phenomenon The Edge Of Aluminum Foil Is Folded Such That No Sharp Points Left Over. This Folding Forms A Ring Named As ‘Corona Ring’. After This, Capacitor Is Impregnated With NON-PCB, NON-TOXIC Bio gradable, Eco Friendly Oil Under Vacuum Which Enhances Life Of Capacitor.

We are one of the trusted names of the industry that provides a wide collection of ID Tags that are made using superior quality raw materials, procured from our reliable vendors. The offered range is provided in several sizes, colors, designs and shapes, to cater to the diverse requirements of our customers. These tags are popular for their lightweight, elegant designs and optimum finishing.