Products / Services #4494137

GETS IS THE FIRST WATER TREATMENT COMPANY IN INDIA TO INTRODUCE BLOOM BOX THE SINGLE SYSTEM WITH ALL POLLUTION CONTROL MEASURES . Gets bloom box will be the next revolution in waste water treatment market. Bloom box is the only solution to control the Water pollution, Air pollution, Noise pollution within the limits. There is no need of plant rooms and numerous civil tanks. Water Pollution : The single system which consist of sewage treatment equipments under the technology of FBBR process. We assure that treated water will meet the PCB norms. Air Pollution : Bloom box consist of forced induced draft principle of equipments that will help to eliminate odor and methane gas accumulation around the plants. Noise Pollution : Bloom box will consist of Acoustic enclosures to eliminate noise levels from 80 EB to 40 DB. It occupies minimum area and provides the look and feel of containerized system. Bloom box will be size of one Genset and exterior design will give an exquisite looks as per your building elevation.

Sewage treatment is the process of removing contaminants from wastewater, including household sewage and runoff (effluents). It includes physical, chemical, and biological processes to remove physical, chemical and biological contaminants. Its objective is to produce an environmentally safe fluid waste stream (or treated effluent) and a solid waste (or treated sludge) suitable for disposal or reuse (usually as farm fertilizer). With suitable technology, it is possible to re-use sewage effluent for drinking water, although this is usually only done in places with limited water supplies.

The effluent treatment plant is designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent.Oily Water Effluent TreatmentService Water Effluent TreatmentCoal Handling Plant & Coal Storage Effluent TreatmentSludge Handling System

Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane. This membrane technology is not properly a filtration method. In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property, that is driven by chemical potential, a thermodynamic parameter. Reverse osmosis can remove many types of molecules and ions from solutions, and is used in both industrial processes and the production of potable water. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective", this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely.

Demineralisation is the Process of removing the mineral salts from water by ion-exchange. Impurities that remains dissolved in water dissociate to form positive and negative charged particles known as ions. These impurities or compounds are called electrolytes. Generally, all natural water has electrolytes in varying concentrations. An ion-exchange vessel holds ion-exchange resin of the required type through which water is allowed to pass. The selective ions in the water are exchanged with ions or radicals loosely held by the resin. In this way, the water is passed through several vessels or a mixed bed vessel so that both positive and negative ions are removed and water is demineralised.

Nanofiltration is a relatively recent membrane filtration process used most often with low total dissolved solids water such as surface water and fresh groundwater, with the purpose of softening (polyvalent cation removal) and removal of disinfection by-product precursors such as natural organic matter and synthetic organic matter.

Ultrafiltration (UF) is a variety of membrane filtration in which forces like pressure or concentration gradients leads to a separation through a semipermeable membrane. Suspended solids and solutes of high molecular weight are retained in the so-called retentate, while water and low molecular weight solutes pass through the membrane in the permeate. This separation process is used in industry and research for purifying and concentrating macromolecular (103 - 106 Da) solutions, especially protein solutions. Ultrafiltration is not fundamentally different from microfiltration, nanofiltration or membrane gas separation, except in terms of the size of the molecules it retains - it is defined by the Molecular Weight Cut Off (MWCO) of the membrane used. Ultrafiltration is applied in cross-flow or dead-end mode.

Filter press is a separation process, specially employed by solidliquid separation using the principle of pressure drive, provided by a slurry pump. Filter press is a fixed volume and batch operation, which simply means that the operation must be stopped to discharge the filter cake before the next batch can be started.[1] The major components of filter press are skeleton and filter pack. The skeleton holds the filter pack together while pressure is being developed inside filter chamber. It however can only hold a specific volume of solids.

Oil skimmers usually incur a low initial cost, install easily, offer rugged construction, reliable operation and minimal upkeep. Training personnel for operation, monitoring and routine maintenance is nil. Still, there are different types of skimmers, and each application requires some analysis to make the best selection. Also, the water collection system must be set up properly in order to get maximum performance from the skimmer. The six major skimmer configurations for industrial plants and service shops are belt, disk, drum, mop, tube and floating suction types. For all types, the oil or other hydrocarbon liquids must be floating on top of the water. For all but the floating suction type, a moving skimmer medium is pulled through or across the surface to attract the oil. This oil is then removed as the medium is pulled through wiper blades or scrapers by a motorized drive system. The skimmed product is discharged through collection trays and drain channels into an external container.

Sand filtration is a frequently used very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of sand with a variety in size and specific gravity. Applications for sand filtration: Preperation of cooling water Treatment of waste water Production of drinking water Filtration in swimming pools Pre filtration for membrane systems Filtration of grey or surface water Removal of iron A sand filter has a dirt holding capacity of 3 to 6 kg TSS m2 of sand surface. When the filters are loaded with particles, the flow direction is reversed and the flow is increased to clean the filter again. This step is called a backwash.

A micron filter is device made of a sifting material and with the capacity to provide retention of very minute substances. Micron filters are mainly used in printer cartridges to aid in separating contaminants from the liquid filtration. Micron filter are also used to filter air vents in printers and help scanners from getting spoilt quickly. Microfiltration (commonly abbreviated to MF) is a type of physical filtration process where a contaminated fluid is passed through a special pore-sized membrane to separate microorganisms and suspended particles from process liquid. It is commonly used in conjunction with various other separation processes such as ultrafiltration and reverse osmosis to provide a product stream which is free of undesired contaminants.

Filling machines are equipment used for packaging of various products, mainly food and beverages. Depending on the product, the container to be filled can either be a bottle or bag. These machines are usually found in manufacturing industry to promote quality and efficiency on the manufacturing process. Products such as sugar, cereals and fresh milk are available in certain quantities. Filling machines are set to fill up the cartons, plastic bags or bottles with the exact amount of product designated to each of them.

PET Blow Moulding Machines for PET bottle production. Our Automatic PET Blow Moulding Machines have wider wide-mouth capability, faster PET bottle production rates, and shorter changeover times. Also have features such as preferential heating or heat-setting capability. Our Two stage Plastic PET machines can make bottles from round to flat bottle styles. With our two stage Automatic PET Blow Molding Machines you can produce various different shaped PET containers, such as mineral water bottle, beverage bottle, cosmetics bottle, medicine bottle, pesticide bottle, edible oil bottle, milk bottle, Juice bottle and many more types of Plastic PET Bottles.

The Multiport Valve offered by us is fabricated using quality material and hard ceramics for effective functions and enhanced service life. Our Multiport Valve is widely appreciated for its innovative design, easy handling and excellent seal capability for preventing internal leakage. Multiport Valve offered by us find applications in various industries.

Advantage Smooth, quite operation - Helical spur gear combination provides grab-free movement and quite, reliable operation. A floting chain guide precisely feeds chain onto a machined-mached, five-pocket chain wheel. This system ensures smooth, jam-resistant operation. Durability - Quantum load chains are precission-formed alloy steel, case hardened and zinc-plated. The plating is an Ingersoll Rand proprietary process that resists corrosion better than any standard plating offered for load chain. Reliability - With high starting torque, Quantum motors utilize a totally enclosed non-ventilated (TENV) squirrel cage design. The H4-duty classification allows for 300 starts and 30 minutes "on-time" per hour. Class F insulation provides a total thermal rating of 145C at a 1.0 service factor, insted of the more common Class B insulation of 120C.