GROVERS INTERNATIONAL

Andheri, Mumbai, Maharashtra

Programmable temperature and timer, Snap-Click loading and a swivel free basket movement, Autoparking of baskets at top position, Illuminated bath for better visibility, External temperature prob, Maintenance free smooth driveWater bath for uniform temperature.This latest version offers validation and wide programming parameters with its new micro-controller. The ED-2L design allows easy installation of the unit. A special cam-drive ensures jerk-free movement.The programmable timer can be set from seconds to minutes and from minutes to hours. This ensures that short and long duration tests can be conducted on the same unit. At the end of the test the baskets are automatically parked at the top position and the timer gives an alarm.offers easy loading of the baskets with swivel free movement through a simple yet unique Snap-Click loading mechanism for attaching and removal of baskets.

Microprocessor based ED-2L is used for testing the disintegration time of tablets, capsules and other solid dosage forms. ED-2L is designed to meet the specifications of USP, IP, DAB and EUR pharmacopoeia. This latest version offers validation and wide programming parameters with its new micro-controller. The ED-2L design allows easy installation of the unit. A special cam-drive ensures jerk-free movement. ED-2L offers easy loading of the baskets with swivel free movement through a simple yet unique Snap-Click loading mechanism for attaching and removal of baskets. The programmable timer can be set from seconds to minutes and from minutes to hours. This ensures that short and long duration tests can be conducted on the same unit. At the end of the test the baskets are automatically parked at the top position and the timer gives an alarm. Illumination is provided at the base of the tester for better viewing of the disintegration process of the test samples. An acrylic water bath is provided to give uniform temperature in the beaker. The temperature can be set from 20C to 39.9C If and is controlled with an accuracy of 0.3C. The built-in RTD sensor monitors the bath D temperature and the external probe monitors beaker temperature.Features Programmable temperature and timer Snap-Click loading and a swivel free basket movement Autoparking of baskets at top position Illuminated bath for better visibility

Supports both USP I, USP II test methods , Two cylinder holders with snap- locK, mechanism for 100 ml and 250 mi cylinders, Simultaneous rotating and tap- ping motion assures an evenly packed surface, 24 x 2 alphanumeric LCD display, User friendly operation with menus, helpline, and current status indicators, Calculation of Test results like Tapped Density, Compressibility Index and Hausner RatiTo ensure a free drop of the cylinder from the required height, the two stations are provided with virtually friction-free bearings. Each station is directly driven by independent motors to ensure a maintenance-free drive. A simultaneous rotating and tapping motion minimises any possible separation of the mass during tapping down, Printer port for documenting test results as per GMPGLP standards.To ensure a free drop of the cylinder from the required height, the two stations are provided with virtually friction-free bearings. Each station is directly driven by independent motors to ensure a maintenance-free drive. A simultaneous rotating and tapping motion minimises any possible separation of the mass during tapping down.During the test the user is guided through lows the user to complete the remaining a series of prompts on the LCD display.

Complies with USP, IP, BP, DAB specifications Ergonomically designed control panel with membrane keyboard, Sturdy bath top plate with precise vessel centering facility, Automated sampling with Peristaltic Pump, Fraction Collector and Manifold, Validation printout of test parameters, Supports USP apparatus 1, 2, 5 and 6, 12 programmable mono- graphs and sampling intervals, Ideal for sustained and controlled release products Supports both glass and Merlon jarsEasy and secure installation

Ergonomically designed control panel with membrane keyboard, Sturdy bath top plate with precise vessel centering facility, Automated sampling with Peristaltic Pump, Fraction Collector and Manifold, Validation printout of test parameters, Supports USP apparatus 1, 2, 5 and 6. 12 programmable mono- graphs and sampling intervals, Ideal for sustained and controlled release products, Supports both glass and Merlon jar, Easy and secure installation.Dissolution testing is one of the most important tests carried out by the pharmaceutical industry on solid dosage forms like tablets, capsules and pellets.This microprocessor based tester anticipates and even exceeds USP requirements. Performance, reliability, accuracy and operator ergonomics - the tester simply defies comparison. Integrating this unit with the peristaltic pump and fraction collector automates the task of sampling. This model validates on-line system performance with a printer link. The tester with 6 stirring stations is user friendly since it eliminates numerous routine manual operations. The position of the 6 test vessels plus replenishment vessel are designed for easy accessibility. The moulded merlon jars are perfectly cylindrical at the top and the bottom portion is a precise hemisphere with three self - supporting legs.The critical positioning of the stirrers in all six test vessels and the precise distance from the bottom is achieved automatically. A comprehensive self -check routine which is initiated when power is switched on gives reliable self-diagnostics: Modular construction includes plug-in PCB's making serviceability and field upgrading an easy task. Twelve programmable sampling intervals and RPM's can be set. The microprocessor precisely controls and displays the RPM using a built-in tachometer. An auto- calibration system ensures a reliable and accurate control of temperature. The test will not start until the set temperature is achieved.