Post Buy Requirement
GE
Thane, Maharashtra, India
Verified Add Review

Other Products / Services #3255396

Wire Cutting Machine

Specifications:

  • Max cutting capacity:up to 10m3/hr (only cutting time, not incl the time for transport of molds).
  • Electric power:380-400V/ 50Hz/3 phases (other electric power resourses are available on request)
  • Very special electric geared motor for driving the cutting frame:capacity 0, 35 kW
  • Geared motors to drive the cutting wires capacity of 1.1kW and 1, 5 kW
  • Cutting frame guiding tubes:4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted
  • Control board:mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
  • All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience
  • Cutting mode:automatic / semi-auto/ manual
  • Size of the mass concrete block before cutting:approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options)
  • Size of the bricks:nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)
View Complete Details

Foam Concrete Mixer

The mixers are uniquely designed to mix foam through concrete in an even manner without destroying the foam. It has inbuilt water discharging system and digital weighing scale.

Features :

  • High output per shift (25)
  • Precise mixture
  • Variable Foam concrete density 400-1800kg/m3
  • Specially designed shaft blades system
  • Reverse and forward mixing
  • Inbuilt digital weighing scale
  • Corrosion resistant
  • High quality bearings
  • High gauge steel body
  • Alloy shaft
  • Impact resistant couplings
  • Inbuilt water discharge system
  • Easy maintenance and operation
View Complete Details

Foaming Agent

Foaming agent is normally used with 2-3% concentration in water. It has 2-years shelf-life when properly stored in the original containers at temperature between 0-50 C. Containers should not be exposed to heat or sunlight for a longer duration. It is environmentally safe and less toxic to aquatic life.

View Complete Details

Mould

  • Mould Size 6ft x 2ft
  • Weight 80kg approx
  • Thickness of Mould 3mm
View Complete Details

Steam Curing Machine

Coil Type Hot water Generator:

    • Capacity:500 Ltr
    • Max. Temp.:900C
    • Width:1200mm
    • Hight:2.5mtr
    • Jacketed Fire box:1200mm dai
    • Wood consumption:100 kg/ Hr.

Coil Type Hot water Generator:

  • Capacity:1000 Ltr
  • Max. Temp.:900C
  • Width:1400mm
  • Hight:3.8mtr
  • Jacketed Fire box:1400mm dai
  • Wood consumption:200 kg/ Hr.
View Complete Details

Foam Concrete Pumps

Advantages :

  • No Seal
  • No valve
  • Self Priming
  • Can Run Dry without Damage
  • Time Saving, Fuel Saving
  • Energy Saving, Minimum Shear
  • No Noise
  • No leakage
  • No Mechanical Seal, No Maintenance
View Complete Details

Electrical Panel

Features :

  • It having Push Button For ON/OFF motor , Conveyor
  • Weight Display STD Only Weight Display
  • Inbuilt Motor Starter
  • Over Load Protection
  • Mains Voltage Measuring Meter and Indication
View Complete Details

Foam Generator

Foam generator makes foam for CLC using foaming agents. Foam generators come with corrosion resistant coated steel body, timer, air compressor, and lance units.

Features :

  • Adjustable density of foam
  • Automatic time setting to off the motor
  • Digital foam generator
  • Easy & cost effective maintenance and operation
  • Daily take 100 cubic meters with our foam generator
  • 1 HP single phase motor
  • Inbuilt control panel
  • Less power consumption
  • Corrosion resistant
  • Foam generator with lance unit
  • Adaptable to different kind of foaming agents
View Complete Details

Safety Gadgets

We are offering all types of safety gadgets that are available from us at very nominal prices.
View Complete Details

Speciality Products

We are deal in all types of speciality products that are available at market leading prices.
View Complete Details

Paver Products

We provide you to its world of paver products
View Complete Details

Block Products

We are one of the famous company, who are manufacturer of block products
View Complete Details

General Lab Equipments

One of the suppliers of industrial products, providing various types of products such as general lab equipments
View Complete Details

Ndt Instruments

We are an eminent and leading trader of ndt instruments
View Complete Details

Survey Instruments

We are offering survey instruments at very market leading prices company.
View Complete Details

Construction Equipments

We are engaged in manufacturing and supplying of construction equipments
View Complete Details

Construction Plant Equipment

We are best offering Construction Plant Equipment
View Complete Details

Construction Chemicals

We are one of the well established manufacturer a wide range of construction chemicals
View Complete Details

Construction Paints

We are offering latest products of construction paints for all age man & woman.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ratan Barhanpure (Gubbi Enterprises)
  • 18/26, Dev Prayag Chs, Bhakti Mandir Road, Nr. Hari Niwas Circle, Thane (w)- 400602, Thane West, Maharashtra, India
  • Share us via
  • Call 08068051376 Ext. 915
List of Other Products by Gubbi Enterprises from Thane, Maharashtra.
Post Buy Requirement
GE
Thane, Maharashtra, India
Verified Add Review

Other Products / Services #3255396

Wire Cutting Machine

Specifications:

  • Max cutting capacity:up to 10m3/hr (only cutting time, not incl the time for transport of molds).
  • Electric power:380-400V/ 50Hz/3 phases (other electric power resourses are available on request)
  • Very special electric geared motor for driving the cutting frame:capacity 0, 35 kW
  • Geared motors to drive the cutting wires capacity of 1.1kW and 1, 5 kW
  • Cutting frame guiding tubes:4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted
  • Control board:mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
  • All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience
  • Cutting mode:automatic / semi-auto/ manual
  • Size of the mass concrete block before cutting:approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options)
  • Size of the bricks:nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)
View Complete Details

Foam Concrete Mixer

The mixers are uniquely designed to mix foam through concrete in an even manner without destroying the foam. It has inbuilt water discharging system and digital weighing scale.

Features :

  • High output per shift (25)
  • Precise mixture
  • Variable Foam concrete density 400-1800kg/m3
  • Specially designed shaft blades system
  • Reverse and forward mixing
  • Inbuilt digital weighing scale
  • Corrosion resistant
  • High quality bearings
  • High gauge steel body
  • Alloy shaft
  • Impact resistant couplings
  • Inbuilt water discharge system
  • Easy maintenance and operation
View Complete Details

Foaming Agent

Foaming agent is normally used with 2-3% concentration in water. It has 2-years shelf-life when properly stored in the original containers at temperature between 0-50 C. Containers should not be exposed to heat or sunlight for a longer duration. It is environmentally safe and less toxic to aquatic life.

View Complete Details

Mould

  • Mould Size 6ft x 2ft
  • Weight 80kg approx
  • Thickness of Mould 3mm
View Complete Details

Steam Curing Machine

Coil Type Hot water Generator:

    • Capacity:500 Ltr
    • Max. Temp.:900C
    • Width:1200mm
    • Hight:2.5mtr
    • Jacketed Fire box:1200mm dai
    • Wood consumption:100 kg/ Hr.

Coil Type Hot water Generator:

  • Capacity:1000 Ltr
  • Max. Temp.:900C
  • Width:1400mm
  • Hight:3.8mtr
  • Jacketed Fire box:1400mm dai
  • Wood consumption:200 kg/ Hr.
View Complete Details

Foam Concrete Pumps

Advantages :

  • No Seal
  • No valve
  • Self Priming
  • Can Run Dry without Damage
  • Time Saving, Fuel Saving
  • Energy Saving, Minimum Shear
  • No Noise
  • No leakage
  • No Mechanical Seal, No Maintenance
View Complete Details

Electrical Panel

Features :

  • It having Push Button For ON/OFF motor , Conveyor
  • Weight Display STD Only Weight Display
  • Inbuilt Motor Starter
  • Over Load Protection
  • Mains Voltage Measuring Meter and Indication
View Complete Details

Foam Generator

Foam generator makes foam for CLC using foaming agents. Foam generators come with corrosion resistant coated steel body, timer, air compressor, and lance units.

Features :

  • Adjustable density of foam
  • Automatic time setting to off the motor
  • Digital foam generator
  • Easy & cost effective maintenance and operation
  • Daily take 100 cubic meters with our foam generator
  • 1 HP single phase motor
  • Inbuilt control panel
  • Less power consumption
  • Corrosion resistant
  • Foam generator with lance unit
  • Adaptable to different kind of foaming agents
View Complete Details

Safety Gadgets

We are offering all types of safety gadgets that are available from us at very nominal prices.
View Complete Details

Speciality Products

We are deal in all types of speciality products that are available at market leading prices.
View Complete Details

Paver Products

We provide you to its world of paver products
View Complete Details

Block Products

We are one of the famous company, who are manufacturer of block products
View Complete Details

General Lab Equipments

One of the suppliers of industrial products, providing various types of products such as general lab equipments
View Complete Details

Ndt Instruments

We are an eminent and leading trader of ndt instruments
View Complete Details

Survey Instruments

We are offering survey instruments at very market leading prices company.
View Complete Details

Construction Equipments

We are engaged in manufacturing and supplying of construction equipments
View Complete Details

Construction Plant Equipment

We are best offering Construction Plant Equipment
View Complete Details

Construction Chemicals

We are one of the well established manufacturer a wide range of construction chemicals
View Complete Details

Construction Paints

We are offering latest products of construction paints for all age man & woman.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ratan Barhanpure (Gubbi Enterprises)
  • 18/26, Dev Prayag Chs, Bhakti Mandir Road, Nr. Hari Niwas Circle, Thane (w)- 400602, Thane West, Maharashtra, India
  • Share us via
  • Call 08068051376 Ext. 915