GST : 24AAACG8889L1ZY
5.0/5
Our Products
Leading Manufacturer, Supplier & Retailer of Rubberized Cork Gaskets And Frames.
In our ongoing efforts to reduce component cost, time and labor in industries, we have come up with a unique idea to manufacturer Rubberized Cork Frames / Gaskets and Components. We manufacture Cork frames of any shape and type; it may be Rectangle, Square, Round, ‘ L ` type or any oblong shape. Cork frames manufactured by us are completely leak proof as the same are made JOINT LESS contrary to the one, which are usually being offered with minimum two to four joints.
We are at present supplying these Frames or ready to use Gaskets to our Customers strictly as per their required Standards. We are also manufacturing complete set of Cork Gasket for Transformer Industries, which can include as many as 52 Gasket of different Shape and Size.
Tips for correct tightening sequence.
It's good practice to tighten a number of bolts from the middle towards the outside of a group in three steps. Initially just until you feel some resistance, then about half the final torque, and finally to the correct torque value.
Specifications
| Mechanical Properties. | GR/GCS - R & B | GR/GCS - S & P | GR/GCS - I & II | ||||||
| (Moderate oil Resistant) | (Good oil Resistant) | (Very good oil Resistant) | |||||||
| RC-50 | RC-70 | RC-80 | RC-50B | RC-70B | RC-80B | RC-50C | RC-70C | RC-80C | |
| Hardness IRDH | 50-10 | 70±10 | 80±10 | 50±10 | 70±10 | 80±10 | 50±10 | 70±10 | 80±10 |
| Dimensional charge percent Max. | 1 5 | 1.5 | 1.5 | 1. 5 | 1. 5 | 1. 5 | 1. 5 | 1. 5 | 1. 5 |
| Tensile Strength | 6.63 | 9.18 | 12.75 | 1 7.14 | 12.75 | 15.5 | 12.75 | 15.5 | 19.5 |
| Kg/cm2 (KPa*) Min. | -650 | -900 | -1250 | -700 | -1250 | -1550 | -1250 | -1550 | -1900 |
| Compressibility at | 45-60 | 35-50 | 25-35 | 45-60 | 35-50 | 25-35 | 35-45 | 25-35 | 15-25 |
| 28 Kg/cm2 (2800 KPa) | |||||||||
| Tpencem45-60 Recovery Percent Min. | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 |
| Compression Set Percent Max. | 80 | 85 | 90 | 80 | 85 | 90 | 80 | 85 | 90 |
| Chemical Test on water extracts | |||||||||
| a) PH. where applicable | 5.0 to 8.50 | 5.0 to 8.50 | 5.0 to 8.50 | ||||||
| b) Chloride content(as chloride ion) | 0.2 percent Max | 0.2 percent Max | 0.2 percent Max | ||||||
| c) Sulphate content(as sulphate ion) | 0.2 percent Max | 0.2 percent Max | 0.2 percent Max | ||||||
| Volume change after immersion | 40 percent Max | 25 percent Max | 15 percent Max | ||||||
| in ASTM oil No 3 for 70 hours | |||||||||
Mr. Ghanshyam Padhiar (Gujarat Cork & Rubber Private Limited)
Plot No. 423 & 424, GIDC Industrial Area, 3rd Phase, Umbergaon, Valsad, Gujarat - 396171
Share us via
