Ores And Minerals #51253

Talc is a hydrous magnesium silicate, (3MgO-4SiO₂-H₂O) when found in pure form. Talc is used as flux for high alumina Ceramics, Sanitaryware and Dinnerware. It is a low cost source of magnesium in these applications and helps to produce less porous bodies at lower firing temperature.

We produce TALK in forms of :
1 Powder (150-25 microns)
2. LUMPS

Packing :Standard Packing available in 50 kg. HDPE bags & 500 KG , 1 or 1.25 MT. Jumbo bags with liner inside, or as per customer requirements

SODIUM FELDSPAR (NA-SPAR)
In ceramic bodies, the main vitrifying (fluxing) agent is feldspar. The majority of white ware bodies contain good proportions of feldspar. It acts as a flux. In the ceramic industry, the flux is defined as that portion of the body which develops glass phase. This is provided mostly by feldspar. The amount of flux in a ceramic body should be only in such a proportion as to develop the desired amount of vitrification. If excess of flux is added, the fired body becomes very glassy and consequently, brittle.
The glass and ceramic industries are the major consumers of feldspar and account for 95% of the total consumption.
Feldspar is generally used for three purposesIn making the body composition of several types of procelain, china and earthenware and also in the preparation of glazes and enamel. As an important ingredient in the glass sand batch. As a bonding agent in the manufacture of bonded abrasives like wheels and discs of garnet, corundum, emery etc

We produce SODIUM FELDSPAR(NA-SPAR) in forms of :1. Granular Particles2. Powder (150-25 microns)3. Lumps form 1 inches to 15 inches
Standard Packing available in 50 kg HDPE bags and 1or 1.25 m t Jumbo bags with liner inside , or as per customer requirements.

WE ARE LEADING MANF. AND EXPORTERS OF HIGH PURITY FELDSPAR FROM INDIA SINCE 1971 ., RECENTLY WE INSTALLED WORLD HIGH TECH PLANTS WITH DAILY CAPACITY 550 MT .

In ceramic bodies, the main vitrifying (fluxing) agent is feldspar. The majority of white ware bodies contain good proportions of feldspar. It acts as a flux. In the ceramic industry, the flux is defined as that portion of the body which develops glass phase. This is provided mostly by feldspar. The amount of flux in a ceramic body should be only in such a proportion as to develop the desired amount of vitrification. If excess of flux is added, the fired body becomes very glassy and consequently, brittle.
The glass and ceramic industries are the major consumers of feldspar and account for 95% of the total consumption. Feldspar is generally used for three purposes

• In making the body composition of several types of procelain, china and earthenware and also in the preparation of glazes and enamel.
• As an important ingredient in the glass sand batch.
• As a bonding agent in the manufacture of bonded abrasives like wheels and discs of garnet, corundum, emery etc

We produce POTASH FELDSPAR(K-SPAR) in forms of :

• Granular Particles
• Powder (150-25 microns)
• Lumps form 1 inches to 15 inches

Standard Packing available in 50 kg HDPE bags and 1 or 1.25 M.T. Jumbo bags with liner inside , or as per customer requirements.

We supply high quality Kaolin Powder, processed in an ISO 9000:2001 certified plant that is well equipped with most sophisticated laboratory for stringent quality control. Kaolin Cf powder is available in various sizes and grades to match the several requirements of the clients. We have firmly positioned ourselves as one of the major white kaolin powder manufacturers and suppliers, based in India. Perfect for different industrial applications, our kaolin powder is highly reliable and proficient. Low impurity and high consistent quality are the unique characteristic of kaolin powder. Features

• High consistent quality
• Very low impurities
• Different grades to suit different kind of applications

Grades

• Ceramics
• Tableware / Dinnerware
• Pottery

• Paint
• Soap & Detergents
• Paper
• Others- as per the Customers specific requirements with the support from our R& D Dept.

Standard Size

• 200, 250, 325 Mesh BSS
• Lumps are also availabl

Applications :
As a filler in rubber, plastic, linoleum paper in paper coating, canvas white, shoe dressings, white ware, sealant, making of cement, as a flux in smelting metallic ores or alloys, as a fertilizer glass manufacturing, ceramics-glazes and enamels, cattle feed etc.


Packing :Standard Packing available in 50 kg. HDPE bags & 1 or 1.25 mt Jumbo bags with liner inside, or as per customer requirements.

Introduction:
The role of Acidic Ramming Mass in steel melting through induction Furnance is very important. Due to its important prop­erty to with stand thermal shocks without developing any cracks due to interrupted power supply which is the case through out our conutry We have taken initiative to develop acidic ramming mass of high quality silica Quartz having heavy dencity.

Product:
Our ramming mass is a product of super snow white crystalline quartz havmg 99.90% Silicon dioxide (sio₂ ) and manufact­ured under strict quality control and calci­ned to eliminate the spal1ing tendancy in stabilized form, where silica neither exponds nor contracts It is suitable for with standing higher temperature upto l720^oc


Specifications:
Sio₂ - 99.90'/.Al₂O₃ - 0.02%
Free from Iron contents

Softerning Point : - 1280 C

Porosity : 50
Compression St : 350 Kg /CM2
Bulk Density : 2.00 to 2.2 Ton/M3
PCE Value ASTN No : 31-32

Important Features:

For the first new lining the requirem­ent of Acidic Ramming Mass is almost 50% of the Furnace capacity in weight.

Remove iron or steel contents by powerful megnet.

It is required to be preheated to 70'-80'C. So as to eliminate moisture during summer months In winter season or rai­ny season. the mass should be preheat­ed at a temperature of 140

^o

- 150

^o

C. then after cooling it down to 50

^o

- 60

^o

C mix thoroughly 0.8 to 1.5 percent boric acid according to the size of the crucible.

Usually 12% of boric acid of medical grade is used for furnaces up to 3 tonn­es Capacity

Store the Ramming mass in dry and dust free area.

OUR ACIDIC RAMMING MASS

Has got three Categories as under­:

Grade M1 Suitable up to 1.5 Tonne furnace capacity.

Grade M2 Suitable for 2 to 3 Tonne furnace capacity.

Grade M3 Suitable For 5 Tonne furnace capacity .

In addition to all we guarantee more lining life with our meterial compared to any other. While sending your querries and orders please do specify the capacity of furnace and type of steel you are manufacturing to enable us to give you the correct combination of Material and advise.

Application :

Our Addic Ramming Mass is used by mixing boric acid 0.8% To 1.5% according to the type of metal Low for Steel and high for cast iron melting. Complete lining guidance can be furnished as required according to the size of furnace

Packing :

Standard Packing available in 50 kg. HDPE bags & 1 or 1.25 mt Jumbo bags with liner inside, or as per customer requirements.