Amritsar, Punjab, India
Our Products
| Machine Size | 33" | 36" | 43" |
| Length of Cut | 33" | 36" | 43" |
| Width of Cut | 33" | 36" | 43" |
| Pile Cut | 4" | 4.5" | 5" |
| Cuts per Minute | 32" | 28" | 25" |
| Power Required H.P. | 2 | 2 | 5 |
| Approx. Weight Kg. | 1600 | 1800 | 2000 |
The High Speed Cutting Machine is specifically Designed to cut board, Plastics, Aluminum, PVC Film, Wood Veneers, Asbestos board, Emery Cloth, Rubber and Leather as well as other Sheet Material that is to be cut with precision and speed. The Friends Makes 115 EMC, High Speed Cutting Machine is a high performance machine designed specifically for the Paper Mills, Offset printers, Print shops, Book Binders , Copier paper industry & stationary industry.
Salient FeaturesThe Storage capacity of the programme is 99 programmes and one programme capacity is 99 cuts in this machine. The accuracy of the programme is 0.01 mm 0.001 inch. Conversion from mm to inch fraction is also possible. The programme controls the backguage with double speed. The machine has a 1:6 ratio motor is installed for very accurate clutch brake system.
Back Gauge AccuracyControl through upper moving system Perfecta (Seypa) Type. The screw is running on ball bearings. Back-gauge guide moves at grinded pillar. Drive Gear BoxThe worm gear drive has ground worm and needs less power than any other conventional drive. The gears are running in oil bath. Air Cushion TableHelps to move the paper stack very easily. Hydraulic ClampAn advance design, together with new technology concepts have account for increasing rationalization and the consequent performance requirements. Friends range now has a new drive Mechanism for clamping. The special features of this machine are double clamping pressure and gentle setting of the clamp on the paper to be cut. The clamping pressure is adjustable with a knob positioned under the table at a convenient place. Indication LightA Beam of light falls across the Knife width, on the paper to be cut without lowering the clamp. This ensures proper cutting. Knife Changing Device:The knife can be changed easily by lift system and safely by a single operator. Photo Electric SafetyGuard A set of infra red light beams are projected in front of the cutting zone just above the table to avoid an accident
Four Bar Rotary Cutting and Creasing machine is useful for creasing and cutting simultaneously. The machine is with two pairs of shafts. The front pair is with cutting dies and rear pair is with creasing die. The lower shaft of each pair can be raised or lowered by revolving side wheel. For easy feeding two guides are provided
| ze | SPEED/MINUTE | MIN DISTANCE | POWER REQUIRED | FLOOR SPACE | GROSS WEIGHT |
| BETWEEN TWO DIES | |||||
| 65'' | 300 | 3" | 1.5 H.P | 85''X52'' | 1700 KGS |
| 75'' | 300 | 3" | 2 H.P. | 98''X52''' | 2100 KGS |
| 85'' | 300 FT/MIN | 3" | 2 H.P. | 110''X52'' | 2300 KGS |
| 95'' | 300 | 3" | 2 H.P. | 120''X60'' | 2500 KGS |
| 105'' | 300 | 3" | 3 H.P. | 130''X60'' | 2700 KGS |
| 125'' | 300 FT/MIN | 3" | 3 H.P. | 150''X70''150''X70'' | 3200 KGS |
This machine cuts the upper printed paper first in one direction & then this sheet is cut perpendicular to the first direction without cutting the back paper to a perfect set size of the label.For an even cutting depth the machine is fitted with hardened and grinded steel bar with disc type cutting blade & setting the cutting depth of cutter up to the thickness of the upper printed sheet is very easy & simple by means of a knob & the speed of cutting is controlled electronically by a potentiometer fitted on control penal.
PERFORATER, CREASER : This Half Cut Sticker Label Cutting Machine is a multipurpose & can be easily converted to ROTARY DISC SLIT PERFORATER & CREASER for perforation as on Bankers cheque book & creasing, bending on wedding cards & Book title creasing.
The Size of machine is 24" 1 Perforater, 1 Creaser & 6 Half Cut Cutters are standard supply. It may be interchanged to each other as per customer requirements. The machine can be ordered for different numbers of perforating discs, may be four or six or eight. Eight holders is standard supply, it may be all half cuts or Creaser or Perforators. Minimum gap between two cutters is 3/4"& about 23 holders can be fitted on this machine as an Optional requirements which is most useful in Half cutting. While ordering please specify your requirement Clearly for what main purpose the machine is needed. The machine can be tailor made to any size and any requirements as mentioned.
